CUTTING PERFORMANCE AND WEAR MECHANISM OF Si₃N₄-BASED NANOCOMPOSITE CERAMIC CUTTING TOOL IN MACHINING OF CAST IRON

REFERENCES

• Ai , X. ( 2003 ) Technology of High-Speed Cutting, , 1st edition , National Defence Industry Press , Beijing , China .
   Google Scholar
• Barry , J. ; Byrne , G. ( 2001 ) Cutting tool wear in the machining of hardened steels part I: Alumina/TiC cutting tool wear . Wear , 247 : 139 – 151 .
   Web of Science ®Google Scholar
• Deng , J.X. ; Cao , T.K. ; Liu , L.L. ( 2005 ) Self-lubrication behaviors of Al2O3/TiB2 ceramic tools in dry high-speed machining of hardened steel . Journal of European Ceramic Society , 25 : 1073 – 1079 .
   Web of Science ®Google Scholar
• Goh , G.K. ; Lim , L.C. ; Rahman , M. ; Lim , S.C. ( 1996 ) Transitions in wear mechanisms of alumina cutting Tools . Wear , 201 : 199 – 208 .
   Web of Science ®Google Scholar
• Huang , C.Z. ; Zhang , L. ; He , L. ; Sun , J. ; Fang , B. ( 2002 ) A study on the prediction of the mechanical properties of a ceramic tool based on an artificial neural network . Journal Material Processing Technology , 129 : 399 – 402 .
   Web of Science ®Google Scholar
• Jones , A.H. ; Dobedoe , R.S. ; Lewis , M.H. ( 2001 ) Mechanical properties and tribology of Si3N4-TiB2 ceramic composites produced by hot pressing and hot isostatic pressing . Journal of European Ceramic Society , 21 : 453 – 462 .
   Google Scholar
• Jones , M.I. ; Hirao , K. ; Hyuga , H. ; Yamauchi , Y.; Kanzaki.S. ( 2003 ) Wear properties of Y-α/β composite sialon ceramics . Journal of European Ceramic Society , 23 : 1743 – 1750 .
   Web of Science ®Google Scholar
• Jose , L. ; Ortiz , M. ; Richard , T.I. ( 2005 ) Relationship between wear rate, surface pullout and microstructure during abrasive wear of alumina and Alumina/SiC nanocomposites . Acta Materialia , 53 : 3345 – 3357 .
   Web of Science ®Google Scholar
• Kasiarova , M. ; Rudnayova , E. ; Dusza , J. ; Hnatko , M. ; Sajgalík , P. ; Merstallinger , A. ; Kuzsella , L. ( 2004 ) Some tribological properties of a carbon-derived Si3N4/SiC nanocomposite . Journal of European Ceramic Society , 12 : 3431 – 3435 .
   Google Scholar
• Kusunose , T. ; Sekino , T. ; Choa , Y.H. ; Niihara , K. ( 2002 ) Fabrication and microstructure of silicon nitride/ boron nitride nanocomposites . Journal of European Ceramic Society , 85 : 2678 – 2688 .
   Google Scholar
• Rao , P.N. ( 2005 ) Manufacturing Technology Metal Cutting & Machine Tools, , 4th edition , China Machine Press , Beijing , China .
   Google Scholar
• Richard , C.B. ( 2003 ) Lessons from 30 years of structural ceramic . Key Engineering Material , 247 : 1 – 12 .
   Google Scholar
• Scuor , N. ; Lucchini , E. ; Maschio , S. ; Casto , S.L. ; Sergo , V. ( 2005 ) Wear mechanisms and residual stresses in alumina-based laminated cutting tools . Wear , 258 : 1372 – 1378 .
   Google Scholar
• Shaw , M.C. ( 2005 ) Metal Cutting Principle, , 2nd edition , Oxford University Press , New York , UK .
   Google Scholar
• Zhao , J. ; Ai , X. ; Lu , Z.J. ( 2006 ) Preparation and characterization of Si3N4/TiC nanocomposite ceramics . Material Letter , 60 : 2810 – 2813 .
   Google Scholar
• Zhao , X.Z. ; Liu , J.J. ; Zhu , B.L. ; Miao , H.Z. ; Luo , Z.B. ( 1999 ) Wear behavior of Si3N4 ceramic cutting tool material against stainless steel in dry and water-lubricated conditions . Ceramic International , 25 : 309 – 315 .
   Web of Science ®Google Scholar
• Zou , B. ; Huang , C.Z. ; Chen , M. ; Gu , M.L. ; Liu , H.L. ( 2007 ) High-temperature oxidation behavior and mechanism of Si3N4/Si3N4w/TiN nanocomposites ceramic cutting tool materials . Material Science and Engineering A , 459 : 86 – 93 .
   Google Scholar
• Zou , B. ; Huang , C.Z. ; Chen , M. ; Gu , M.L. ; Liu , H.L. ( 2007 ) Study on the mechanical properties, toughening and strengthening mechanism of Si3N4/Si3N4w/TiN nanocomposites ceramic cutting tool materials . Acta Materialia , 55 : 4193 – 4202 .
   Google Scholar