AN EXPERIMENTAL AND FEM STUDY ON DRY TURNING OF ROTOR STEEL 26NiCrMoV145 USING MULTILAYER COATED CEMENTED CARBIDE TOOL

REFERENCES

• Devillez , A. ; Schneider , F. ; Dominiak , S. ; Larrouquere , D. ( 2007 ) Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools . WEAR , 262 : 931 – 942 .
   Web of Science ®Google Scholar
• Fang , N. ; Wu , Q. ( 2009 ) A comparative study of the cutting forces in high speed machining of Ti–6Al–4 V and Inconel 718 with a round cutting edge tool . International Journal of Materials Processing Technology , 209 : 4386 – 4390 .
   Google Scholar
• Li , H.Z. ; Zeng , H. ; Chen , X.Q. (2006) An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. International Journal of Materials Processing Technology , 180: 296–304.
   Web of Science ®Google Scholar
• Liu , G. ; Chen , M. ; Shen , Z. ( 2006 ) Experimental studies on machinability of six kinds of nickel-based superalloys . International Journal of Machining and Machinability of Materials , 3 : 287 – 300 .
   Google Scholar
• Shet , C. ; Deng , X. ( 2003 ) Residual stresses and strains in orthogonal metal cutting . International Journal of Machine Tools & Manufacture , 43 : 573 – 587 .
   Web of Science ®Google Scholar
• Noordin , M.Y. ; Venkatesh , V.C. ; Sharif , S. ( 2007 ) Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools . International Journal of Materials Processing Technology , 85 : 83 – 90 .
   Google Scholar
• Third Wave System Inc. Advantage FEM user's manual 5.5 , 2008 .
   Google Scholar
• Outeiro , J.C. ; Umbrello , D. ; M'Saoubi , R. ( 2006 ) Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316 L steel . International Journal of Machine Tools & Manufacture , 46 : 1786 – 1794 .
   Web of Science ®Google Scholar
• Zhang , D.-J. ; Wan , C. ; Liu , G. ; Chen , M. ( 2008 ) A FEM and experiment study on high speed machining of nickel-based superalloy GH4169 . Key Engineering Materials , 375–376 : 82 – 86 .
   Google Scholar
• Shin , Y.C. ( 2001 ) Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cutting tools . International Journal of Machine Tools & Manufacture , 41 : 1763 – 1781 .
   Google Scholar
• Haci , S. ; Faruk , U. ; Suleyman , Y. ( 2006 ) Investigation of the effect of rake angle and approaching angle on main cutting force and tool tip temperature . International Journal of Machine Tools & Manufacture , 46 : 132 – 141 .
   Google Scholar
• Thakur , D.G. ; Ramamoorthy , B. ; Vijayaraghavan , L. ( 2009 ) Study on the machinability characteristics of superalloy Inconel 718 during high speed turning . Materials and Design , 30 : 1718 – 1725 .
   Web of Science ®Google Scholar
• Mohamed , N. ; Nasr , A. ; Ng , E.-G. ; Eibestawi , M.A. ( 2007 ) Modeling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316 L . International Journal of Machining Tools & Manufacture , 47 : 401 – 411 .
   Google Scholar
• Lim , C.Y.H. ; Lim , S.C.; Lee K.S. ( 1999 ) Wear of TiC-coated carbide tools in dry turning . WEAR , 225–229 : 354 – 367 .
   Web of Science ®Google Scholar
• Ibrahim , C. ( 2006 ) Machining of austenitic stainless steels using CVD multi-layer coated cemented carbide tools . Tribology International , 39 : 565 – 569 .
   Google Scholar