Correlation Between Cutting Data Selection and Chip Form in Stainless Steel Turning

REFERENCES

• Advant Edge (2010) User's Manual of AdvantEdge v5.6 Machining Simulation Software. AdvantEdge, Minneapolis, MN.
   Google Scholar
• Al-Zkeri, I.; Rech, J.; Altan, T.; Hamdi, H.; Valiorgue, F. (2009) Optimization of the cutting edge geometry of coated carbide tools in dry turning of steels using a finite element analysis. Machining Science and Technology: An International Journal, 13: 36–51.
   Web of Science ®Google Scholar
• Atlati, S.; Haddag, B.; Nouari, M.; Zenasni, M. (2011) Analysis of a new segmentation intensity ratio ‘‘SIR’’ to characterize the chip segmentation process in machining ductile metals. International Journal of Machine Tools and Manufacture, 51: 687–700.
   Web of Science ®Google Scholar
• Beňo, J.; Maňková, I.; Vrabel, M.; Kottfer, D. (2013) Roughness measurement methodology for selection of tool inserts. Measurement.Journal of the International Measurement Confederation, 46(1): 582–592.
   Google Scholar
• Brožek, M. (2005) Cutting conditions optimization when turning overlays. Journal of Materials Processing Technology, 168: 488–495.
   Google Scholar
• Čep, R.; Neslušan, M.; Barišić, B. (2008) Chip formation analysis during hard turning. Strojarstvo, 50(6): 337–346.
   Google Scholar
• Dix, M.; Leopold, J.; Neugebauer, R. (2007) Investigations on the influence of local material properties of burr formation. In Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, 133–140.
   Google Scholar
• El-Tamimi, A.M.; El-Hossainy, T.M. (2008) Investigating the tool life, cutting force components, and surface roughness of AISI 302 stainless steel material under oblique machining. Materials and Manufacturing Processes. 23: 427–438.
   Web of Science ®Google Scholar
• Gao, C.; Zhang, L. (2013) Effect of cutting conditions on the serrated chip formation in high speed cutting. Machining Science and Technology: An International Journal, 17(1): 26–40.
   Web of Science ®Google Scholar
• Grzesik, W.; Bernat, P. (1998) An investigation of the cutting process for chip breaking monitoring in turning of steels. Journal of Manufacturing Science and Engineering: Transactions of the ASME, 120: 555–562.
   Web of Science ®Google Scholar
• Haddag, B.; Makich, H.; Nouari, M.; Dhers, J. (2014a) Tribological behavior and tool wear analyses in rough turning of large-scale parts of nuclear power plants using grooved coated insert. Tribology International, 80: 58–70.
   Web of Science ®Google Scholar
• Haddag, B.; Nouari, M.; Barlier, C.; Dhers, J. (2014b) Experimental and numerical analyses of the tool wear in rough turning of large dimensions components of nuclear power plants. Wear, 312: 40–50.
   Web of Science ®Google Scholar
• Hagiwara, M.; Chen, S.; Jawahir I.S. (2009) Contour finish turning operations with coated grooved tools: optimization of machining performance. Journal of Materials Processing Technology, 209(1): 332–342.
   Web of Science ®Google Scholar
• Islam, M.N. (2013) Effect of additional factors on dimensional accuracy and surface finish of turned parts. Machining Science and Technology: An International Journal, 17(1): 145–162.
   Web of Science ®Google Scholar
• Jawahir, I.S.; van Luttervelt, C.A. (1993) Recent developments in chip control research and applications. Annals of the CIRP, 42(2): 659–685.
   Google Scholar
• Jawahir, I.S.; Wang X. (2007) Development of hybrid predictive models and optimization techniques for machining operations. Journal of Materials Processing Technology, 185(1–3): 46–59.
   Web of Science ®Google Scholar
• Kim, S.S.; Kim, I.H.; Mani V.; Kim H.J. (2007) Real-coded genetic algorithm for machining condition optimization. The International Journal of Advanced Manufacturing Technology, 38(9–10): 884–895.
   Web of Science ®Google Scholar
• Kim, J.D.; Kweun, O.B.; (1997) A chip-breaking system for mild steel in turning. International Journal of Machine Tools Manufacture, 37(5): 607–617.
   Web of Science ®Google Scholar
• Kluft, W.; König, W.; van Luttervelt, C.A.; Nakayama, K.; Pekelharing, A.J. (1979) Present knowledge of chip control. Annals of the CIRP, 28(2): 441–455.
   Google Scholar
• Komanduri, R.; Schroeder, T.A. (1986) On shear instability in machining a nickel–iron based superalloy. Journal of Manufacturing Science and Engineering: Transactions of the ASME, 108(2): 93–100.
   Web of Science ®Google Scholar
• Kouadri, S.; Necib, K.; Atlati, S.; Haddag, B.; Nouari, M. (2013) Quantification of the segmentation in metal machining: application to machining aeronautical aluminium alloy AA2024-T351 with cemented carbide tools WC-Co. International Journal of Machine Tools and Manufacture, 64: 102–113.
   Web of Science ®Google Scholar
• Kundrak, J.; Varga, G. (2012) Possibility of reducing environmental load in hard machining. Key Engineering Materials, 496: 205–210.
   Google Scholar
• Maniraj, J.; Selladurai, V.; Sivashanmugam, N.; Vendan, S.A.; Myilswamy, S. (2012) Hard finish turning parameters optimization for machining of high temperature stainless steel. High Temperature Materials and Processes, 31(6): 679–689.
   Web of Science ®Google Scholar
• Manna, A.; Salodkar, S. (2008) Optimization of machining conditions for effective turning of E0300 alloy steel. Journal of Materials Processing Technology, 203(1–3): 147–153.
   Web of Science ®Google Scholar
• Przybylski, L.; Słodki, B. (1997) The influence of local operating features on cutting parameters in turning. The International Journal of Advanced Manufacturing Technology, 13: 233–236.
   Web of Science ®Google Scholar
• Rafai, N.H.; Islam, M.N. (2009) An investigation into dimensional accuracy and surface finish achievable in dry turning. Machining Science and Technology: An International Journal, 13(4): 571–589.
   Web of Science ®Google Scholar
• Sandvik Coromant (1997) Application Guide: Stainless Steel Turning. AB Sandvik Coromant, Sandviken, Sweden.
   Google Scholar
• Sandvik Coromant (2000–2011) Turning Tools Catalogs. AB Sandvik Coromant, Sandviken, Sweden..
   Google Scholar
• Słodki, B.; Zębala, W.; Struzikiewicz, G. (2006) Some aspects of difficult-to-cut material machining. In Proceedings of the 5th International Tools Conference, Zlin, Czech Republic, Thomas Bata University, 19: 1–10.
   Google Scholar
• Sun, S.; Brandt, M.; Dargusch, M.S. (2009) Characteristics of cutting forces and chip formation in machining of titanium alloys. International Journal of Machine Tools and Manufacture, 49(7–8): 561–568.
   Web of Science ®Google Scholar
• Zębala, W.; Słodki, B. (2008) Some aspects of chip breakers efficiency in difficult-to-cut materials turning. In Proceedings of the Modeling Technology – Machining Solutions Conference, Third Wave Systems, Minneapolis, MN, Minneapolis, Minnesota, USA; 19: 1–14.
   Google Scholar
• Zębala, W.; Słodki, B.; Struzikiewicz G. (2013) Productivity and reliability improvement in turning Inconel 718 Alloy-Case Study. Eksploatacja i Niezawodnosc - Maintenance and Reliability, 15(4): 421–426.
   Google Scholar