Experimental Investigations of Machinability in the Turning of Compacted Graphite Iron using Minimum Quantity Lubrication

REFERENCES

• Abele, E.; Burkhard, S. () Using PCD for machining CGI with a CO2 coolant system. Production Engineering, 2(2): 165–169.
   Google Scholar
• Ali, S.M.; Dhar, N.R.; Dey, S.K. () Effect of minimum quantity lubrication (MQL) on cutting performance in turning medium carbon steel by uncoated carbide insert at different speed-feed combinations. Advances in Production Engineering &Management, 6(3): 185–196.
   Google Scholar
• Alves, S.M.; Schroeter, R.B.; Bossardi, J.C.D.S.; Andrade, C.L.F. () Influence of EP additive on tool wear in drilling of compacted graphite iron. Journal of the Brazilian Society of Mechanical Science & Engineering, 33(2): 197–202.
   Web of Science ®Google Scholar
• Armarego, E.J.A.; Brown, R.H. (1969) The Machining Metals. 1st edition, Prentice Hall, Englewood Cliffs, New Jersey, USA.
   Google Scholar
• Dawson, S.; Hollinger, I.; Robbins, M.; Daeth, J.; Reuter, U.; Schulz, H. () The Effect of Metallurgical Variables on the Machinability of Compacted Graphite Iron. Proceedings of SAE World Congress, Detroit, Michigan, USA.
   Google Scholar
• Elbestawi, M. () Modeling the effect of the microstructure of compacted graphite iron on chip formation. International Journal of Machine Tools and Manufacture, 51(10–11): 753–765.
   Web of Science ®Google Scholar
• Gaitonde, V.N.; Karnik, S.R.; Davim J.P. () Optimal MQL and cutting conditions determination for desired surface roughness in turning of brass using genetic algorithms. Machining Science and Technology, 16(2): 304–320.
   Web of Science ®Google Scholar
• Gastel, M.; Konetschny, C.; Reuter, U.; Fasel, C.; Schulz, H.; Riedel, R.; Ortner, H.M. () Investigation of the wear mechanism of cubic boron nitride tools used for the machining of compacted graphite iron and grey cast iron. International Journal of Refractory Metals and Hard Materials, 18(6): 287–296.
   Web of Science ®Google Scholar
• Haile, M.B. (2011) Optimization of Cutting Parameters in Machining of Compacted Graphite Iron (CGI). Kungl Tekniska Högskolan (Royal Institute of Technology) (KTH), School of Industrial Engineering and Management, Stockholm, Sweden, Master thesis.
   Google Scholar
• Mariayyaha, R.; Pattenb, J.P.; Cherukuri, H.P. () Relationship between machining forces and diamond tool wear during ductile regime machining of silicon nitride. Machining Science and Technology, 16(1): 53–70.
   Web of Science ®Google Scholar
• Mocellin, F.; Melleras, E.; Guesser, W.L.; Boehs, L. () Study of the machinability of compacted graphite iron for drilling process. Journal of the Brazilian Society of Mechanical Science & Engineering, 26(1): 22–27.
   Google Scholar
• Mohammed, W.M.; Ng, E.; Elbestawi, M.A. () Modeling the effect of compacted graphite iron microstructure on cutting forces and tool wear. CIRP Journal of Manufacturing Science and Technology, 5(2): 87–101.
   Google Scholar
• Murthy, V.S.R.; Seshan, S.; Seshan, K. (1985) Vermicular graphite cast iron current state of the art. Sadhana-Academy Proceedings in Engineering Sciences, India, (): 361–372.
   Google Scholar
• Nayyar, V.; Nyborg, L.; Kaminski, J. (2009) Machinability of Compacted Graphite Iron (CGI), a Microstructural and Mechanical Properties Comparison Approach, Swedish Production Symposium, Göteborg, Sweden, 2009.
   Google Scholar
• Rahman, K.M. () Effect of minimum quantity lubrication (MQL) in drilling commercially used steels, Bangladesh University of Engineering and Technology (BUET), Bangladesh, PhD thesis.
   Google Scholar
• Rosa, S.D.; Diniz, A.E.; Andrade, C.L.F.; Guesser, W.L. () Analysis of tool wear, surface roughness and cutting power in the turning process of compact graphite irons with different titanium content. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 32(3): 234–240.
   Web of Science ®Google Scholar
• Souza, J.V.C.; Nono, M.C.A.; Ribeiro, M.V.; Machado, J.P.B.; Silva, O.M.M. () Cutting forces in turning of gray cast iron using silicon nitride based cutting tool. Materials & Design, 30(7): 2715–2720.
   Web of Science ®Google Scholar
• Varghese, K.P. (2008) Machining of Compacted Graphite Iron (CGI) and Spheroidal Graphite Iron (SGI): A Fundamental Study of Tribological Issues and Progressive Cutting Tool Wear, The University of Utah, Salt Lake City, Utah, USA, PhD thesis.
   Google Scholar
• Varghese, K.P.; Balaji, A.K. () Effects of tool material, tool topography and minimal quantity lubrication (MQL) on machining performance of compacted graphite iron (CGI). International Journal of Cast Metals Research, 20(6): 347–358.
   Web of Science ®Google Scholar
• Weinert, K.; Inasaki, I.; Sutherland, J.W.; Wakabayashi, T. () Dry machining and minimum quantity lubrication. CIRP Annals-Manufacturing Technology, 53: 511–537.
   Web of Science ®Google Scholar