A new reverse engineering method to combine FEM and CFD simulation three-dimensional insight into the chipping zone during the drilling of Inconel 718 with internal cooling

References

• Alberdi, R.; Sanchez, J.A.; Pombo, I.; Ortega, N.; Izquierdo, B.; Plaza, S.; Barrenetxea, D. (2011) Strategies for optimal use of fluids in grinding. International Journal of Machine Tools and Manufacture, 51: 491–499.
   Google Scholar
• ANSYS. (2013) CFX-Solver Theory Guide. ANSYS, Inc., Canonsburg, PA 15317.
   Google Scholar
• Arrazola, P.J.; Özel, T.; Umbrello, D.; Davies, M.; Jawahir, I.S. (2013) Recent advances in modelling of metal machining processes. CIRP Annals – Manufacturing Technology, 62: 695–718.
   Google Scholar
• Beer, N.; Oezkaya, E.; Biermann, D. (2014) Drilling of Inconel 718 with geometry-modified twist drills. Procedia CIRP, 24: 49–55.
   Google Scholar
• Bhowmick, S.; Alpas, A.T. (2008) Minimum quantity lubrication drilling of aluminium–silicon alloys in water using diamond-like carbon coated drills. International Journal of Machine Tools and Manufacture, 48: 1429–1443.
   Google Scholar
• Bhowmick, S.; Lukitsch, M.J.; Alpas, A.T. (2010) Dry and minimum quantity lubrication drilling of cast magnesium alloy (AM60) International Journal of Machine Tools and Manufacture, 50: 444–457.
   Google Scholar
• Bouberki, N. (2011) An Investigation in drilling 1020 steel using minimum quantity lubrication. International Journal of Applied Science and Technology, 1: 60–67.
   Google Scholar
• Brinksmeier, E.; Meyer, D.; Huesmann-Cordes, A.G; Herrmann, C. (2015) Metalworking fluids—Mechanisms and performance. CIRP Annals – Manufacturing Technology, 64: 605–628.
   Google Scholar
• Çakīr, O.; Yardimeden, A.; Ozben, T.; Kilickap, E. (2007) Selection of cutting fluids in machining processes. Journal of Achievements in Materials and Manufacturing Engineering, 25: 99–102.
   Google Scholar
• Chowdhury, S.A.; Islam, M.N.; Boswell, B. (2014) Effectiveness of Using CFD for Comparing Tool Cooling Methods. Newswood Limited; International Association of Engineers, Hong Kong.
   Google Scholar
• Fallenstein, F.; Aurich, J.C. (2014) CFD based investigation on internal cooling of twist drills. Procedia CIRP, 14: 293–298.
   Google Scholar
• Heinemann, R.; Hinduja, S.; Barrow, G.; Petuelli, G. (2006) Effect of MQL on the tool life of small twist drills in deep-hole drilling. International Journal of Machine Tools and Manufacture, 46: 1–6.
   Google Scholar
• Ke, F.; Ni, J.; Stephenson, D.A. (2005) Continuous chip formation in drilling. International Journal of Machine Tools and Manufacture, 45: 1652–1658.
   Google Scholar
• Lee, S.H. (2005) A CAD–CAE integration approach using feature-based multi-resolution and multi-abstraction modelling techniques. Computer-Aided Design, 37: 941–955.
   Google Scholar
• Lopez-Arraiza, A.; Castillo, G.; Dhakal, H.N.; Alberdi, R. (2013) High performance composite nozzle for the improvement of cooling in grinding machine tools. Composites Part B: Engineering, 54: 313–318.
   Google Scholar
• Menter, F.R. (1994) Two-equation eddy-viscosity turbulence models for engineering applications. AIAA Journal, 32: 1598–1605.
   Google Scholar
• Oezkaya, E.; Beer, N.; Biermann, D. (2016) Experimental studies and CFD simulation of the internal cooling conditions when drilling Inconel 718. International Journal of Machine Tools and Manufacture, 108: 52–65.
   Google Scholar
• Peng, T.; Xu, X. (2014) Energy-efficient machining systems: A critical review. International Journal of Advanced Manufacturing Technology, 72: 1389–1406.
   Google Scholar
• Peng, Q.; Loftus, M. (2001) Using image processing based on neural networks in reverse engineering. International Journal of Machine Tools and Manufacture, 41: 625–640.
   Google Scholar
• Roukema, J.C.; Altintas, Y. (2007) Generalized modeling of drilling vibrations. Part I. Time domain model of drilling kinematics, dynamics and hole formation. International Journal of Machine Tools and Manufacture, 47: 1455–1473.
   Google Scholar
• Son, S.; Park, H.; Lee, K.H. (2002) Automated laser scanning system for reverse engineering and inspection. International Journal of Machine Tools and Manufacture, 42: 889–897.
   Google Scholar
• Tai, C-C.; Huang, M-C. (2000) The processing of data points basing on design intent in reverse engineering. International Journal of Machine Tools and Manufacture, 40: 1913–1927.
   Google Scholar
• Woo, H.; Kang, E.; Wang, S.; Lee, K.H. (2002) A new segmentation method for point cloud data. International Journal of Machine Tools and Manufacture, 42: 167–178.
   Google Scholar
• Zexiao, X.; Jianguo, W.; Qiumei, Z. (2005) Complete 3D measurement in reverse engineering using a multi-probe system. International Journal of Machine Tools and Manufacture, 45: 1474–1486.
   Google Scholar