Effect of process induced variations on machining characteristics of a model epoxy resin system

References

• Agarwal, H.; Amaranath, A.; Jamthe, Y.; Gururaja, S. (2015) An Investigation of Cutting Mechanisms and Strain Fields during Orthogonal Cutting in CFRPs. Machining Science and Technology: An International Journal, 19(3): 415.
   Google Scholar
• Andrew, J.J.; Arumugam, V.; Santulli, C. (2016) Effect of post-cure temperature and different reinforcements in adhesive bonded repair for damaged glass/epoxy composites under multiple quasi-static indentation loading. Composite Structures, 143: 63.
   Google Scholar
• Arulappan, C.; Duraisamy, A.; Adhikari, D.; Gururaja, S. (2015) Investigations on pressure and thickness profiles in carbon fiber-reinforced polymers during vacuum assisted resin transfer molding. Journal of Reinforced Composites and Plastics, 34(1): 3.
   Google Scholar
• Becker, O.; Cheng, Y.-B.; Varley, R.J.; Simon, G.P. (2003) Layered silicate nanocomposites based on various high-functionality epoxy resins: The influence of cure temperature on morphology, mechanical properties, and free volume. Macromolecules, 36: 1616.
   Google Scholar
• Brown, T.L.; Saldana, C.; Murthy, T.G.; Mann, J.B.; Guo, Y.; Allard, L.F.; King, A.H.; Compton, W.D.; Trumble, K.P.; Chandrasekar, S. (2009) A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper. Acta Materialia, 57(18): 5491.
   Google Scholar
• Davies, L.; Day, R.; Bond, D.; Nesbitt, A.; Ellis, J.; Gardon, E. (2007) Effect of cure cycle heat transfer rates on the physical and mechanical properties of an epoxy matrix composite. Composites Science and Technology, 67(9): 1892.
   Google Scholar
• Ferry, J.D. (1980) Viscoelastic Properties of Polymers. Wiley, USA.
   Google Scholar
• Filiou, C.; Galiotis, C. (1999) In situ monitoring of the fibre strain distribution in carbon-fibre thermoplastic composites1. Application of a tensile stress field. Composites Science and Technology, 59(14): 2149.
   Google Scholar
• Gupta, V.B.; Drzal, L.T.; Lee, C.Y.-C.; Rich, M.J. (1985) The temperature-dependence of some mechanical-properties of a cured epoxy-resin system. Polymer Engineering and Science, 25(13): 812.
   Google Scholar
• Gururaja, S.; Ramulu, M. (2010) Analytical formulation of subsurface stresses during orthogonal cutting of FRPs. Composites Part A, 41(9): 1164.
   Google Scholar
• Hayes, M.; Edwards, D.; Shah, A. (2015) Fractography in Failure Analysis of Polymers. Woodhead Publishing Series in Composites Science and Engineering, PA, USA.
   Google Scholar
• Huang, Y.; Varna, J.; Talreja, R. (2014) Statistical methodology for assessing manufacturing quality related to transverse cracking in cross ply laminates. Composite Science and Technology, 95: 100.
   Google Scholar
• Kumar, D.S.; Shukla, M.J.; Mahato, K.K.; Rathore, D.K.; Prusty, R.K.; Ray, B.C. (2015) Effects of temperature and loading speed on interface-dominated strength in fibre/polymer composites: an evaluation for in-situ environment. IOP Conference Series: Materials Science and Engineering, 75: 012012.
   Google Scholar
• Lahuerta, F.; Nijssen, R.P.L.; van der Meer, F.P. (2015) Experimental-computational study towards heat generation in thick laminates under fatigue loading. International Journal of Fatigue, 80: 121.
   Google Scholar
• Lahuerta, F.; Nijssen, R.P.L.; van der Meer, F.P.; Sluys, L.J. (2017) The influence of curing cycle and through thickness variability of properties in thick laminates. Journal of Composite Materials, 51(1): 563
   Google Scholar
• Lee, S.Y.; Springer, G.S. (1988) Effects of cure on the mechanical properties of composites. Journal of Composite Materials, 22: 15.
   Google Scholar
• Lee-Sullivan, P.; Dykeman, D. (2000) Guidelines for performing storage modulus measurements using the TA Instruments DMA 2980 three-point bend mode I. Amplitude effects. Polymer Testing, 19: 155.
   Google Scholar
• Loos, A.C.; Springer, G.S. (1983) Curing of epoxy matrix composites. Journal of Composite Materials, 17: 135.
   Google Scholar
• Mulle, M.; Collombet, F.; Olivier, P.; Grunevald, Y.H. (2009a) Assessment of cure residual strains through the thickness of carbon-epoxy laminates using FBGs, Part I: Elementary specimen. Composites Part A, 40: 94.
   Google Scholar
• Mulle, M.; Collombet, F.; Olivier, P.; Zitoune, R.; Huchette, C.; Laurin, F.; Grunevald, Y.H. (2009b) Assessment of cure-residual strains through the thickness of carbon-epoxy laminates using FBGs Part II: Technological specimen. Composites Part A, 40: 1534.
   Google Scholar
• Renton, W.J.; Olcott, D.; Roeseler, W.; Batzer, R.; Baron, W.; Velicki, A. (2004) Future of flight vehicle structures (2000 to 2023). Journal of Aircraft, 41: 986.
   Google Scholar
• Saoudi, J.; Zitoune, R.; Gururaja, S.; Mezlini, S.; Hajjaji, A. (2016a) Prediction of critical thrust force for exit-ply delamination during drilling composite laminates: Thermo-mechanical analysis. International Journal of Machining and Machinability of Materials, 18(1–2): 77.
   Google Scholar
• Saoudi, J.; Zitoune, R.; Mezlini, S.; Gururaja, S.; Seitier, P. (2016b) Critical thrust force predictions during drilling: Analytical modeling and X-ray tomography quantification. Composite Structures, 153: 886.
   Google Scholar
• Shaw, M.C. (1960) Metal Cutting Principles. The MIT Press, USA.
   Google Scholar
• Villoria, R.G.; Miravete, A.; Cuartero, J.; Chiminelli, A.; Tolosana, N. (2006) Mechanical. properties of SWNT/epoxy composites using two different curing cycles. Composites Part B: Engineering, 37: 273.
   Google Scholar
• Ziaee, S.; Palmese, G.R. (1999) Effects of temperature on cure kinetics and mechanical properties of vinyl–ester resins. Journal of Polymer Science: Part B: Polymer Physics, 37: 725.
   Google Scholar