Modeling of machined surface characteristics in cryogenic orthogonal turning of inconel 718

References

• Arrazola, P.J.; Özel, T. (2010) Investigations on the effects of friction modeling in finite element simulation of machining. International Journal of Mechanical Sciences, 52: 31–42.
   Google Scholar
• Arrazola, P.J.; Özel, T.; Umbrello, D.; Davies, M.; Jawahir, I.S. (2013) Recent advances in modeling of metal machining processes. CIRP Annals – Manufacturing Technology, 62(2): 698–715.
   Google Scholar
• Astakhov, V.P. (2011) Finite element method in manufacturing processes: chapter 1, Authentication of FEM in Metal Cutting, J.P. Davim, Wiley: Aveiro, Portugal.
   Google Scholar
• Astakhov, V.P.; Joksch, S. (2012) Metal Working Fluids: Fundamentals and Recent Advances, Woodhead, Publishing Limited, Cambridge: UK.
   Google Scholar
• Barron, R.F. (1999) Cryogenic Heat Transfer Coefficient, Taylor and Francis: Philadelphia, USA.
   Google Scholar
• Blaser Swisslube AG. (1.12.2010) Blasocut 2000 CF. Available: http://www.cortecmov.se/wp-content/uploads/2012/10/Blaser-produktblad-2000CF.pdf Last accessed 9 September 2016.
   Google Scholar
• Courbon, C.; Sajn, V.; Kramar, D.; Rech J.; Kosel, F.; Kopac, J. (2011) Investigation of machining performance in high pressure jet assisted turning of Inconel 718: A numerical model. Journal of Materials Processing Technology, 211(11): 1834–1851.
   Google Scholar
• C-THERM TECHNOLOGIES. (20.10.2011) Thermal Conductivity of Mineral Oils Based Transformer fluid, http://ctherm.com/resources/blog/thermal_conductivity_of_mineral_oil_based_transformer_fluid/ Last accessed 9 September 2016.
   Google Scholar
• Cullity, B.D.; Stock, S.R. (2001) Elements oy X-ray Diffraction, Prentice-Hall: New York, USA.
   Google Scholar
• Dhokia, V.; Shokrani, A.; Correa Paulino, D.; Newman, S.T. (2012) Effects of cryogenic cooling on the surface quality and tool wear in end-milling 6061-t6 aluminium, 22nd Int. Conf. on Flexible Automation and Intelligent Manufacturing (FAIM), Helsinki, Finland.
   Google Scholar
• Ding, Y.; Hong, S.Y. (1995) A study of the cutting temperatures in machining processes cooled by liquid nitrogen. Society of Mechanical Engineering MR, 95–113.
   Google Scholar
• Dix, M.; Wertheim, R.; Schmidt, G.; Hochmuth, C. (2014) Modeling of drilling assisted by cryogenic cooling for higher efficiency. CIRP Annals—Manufacturing Technologies, 63: 73–76.
   Google Scholar
• Fabre, D. (2013) Characterization of cutting tool wear in cryogenically assisted machining of Inconel 718, Master Thesis, University of Lyon, ENISE.
   Google Scholar
• Horak, A.; Raudensky, M.; Pohanka, M.; Bellerova, H.; Reichardt, T. (2011) Research on cooling efficiency of water, emulsions and oil. Engineering Mechanics, 18(2): 81–89.
   Google Scholar
• Hribersek, M.; Sajn, V.; Pusavec, F.; Rech, J.; Kopac, J. (2016) The procedure of solving the inverse problem for determining surface heat transfer coefficient between liquefied nitrogen and Inconel 718 workpiece in cryogenic machining. Journal of Mechanical Engineering, 62: 331–339.
   Google Scholar
• Nasr, M.N.A.; Ng, E.-G.; Elbestawi, M.A. (2006) Modelling the effects of the tool-edge radius on residual stresses when orthogonal cutting AISI 316L. International Journal of Machine Tools & Manufacture, 47: 401–411.
   Google Scholar
• Olovsson, L.; Nilsson, L.; Simonsson, K. (1999) An A.L.E. formulation for the solution of two-dimensional metal cutting problems. Computers and Structures, 72: 497–507.
   Google Scholar
• Outeiro J.C.; Umbrello D.; M'Saoubi R. (2006) Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel. International Journal of Machine Tools and Manufacture, 46: 1786–1794.
   Google Scholar
• Pu, Z.; Outeiro, J.C.; Batista, A.C.; Dillon, O.W. Jr.; Puleo, D.A.; Jawahir, I.S. (2011) Surface Integrity in Dry and Cryogenic Machining of AZ31B Mg Alloy with Varying Cutting Edge Radius Tools, 1st CIRP Conf. on Surface Integrity Procedia Engineering, Bremen, Germany.
   Google Scholar
• Pusavec, F.; Courbon, C.; Rech, J.; Kopač, J.; Jawahir, I.S. (2014) An Investigation of the Effect of Nitrogen Phase on Cryogenic Machining Performance and a Case Study on Machining of Inconel 718 Alloy, SME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference, Detroit, USA.
   Google Scholar
• Pusavec, F.; Deshpande, A.; Yang, S.; M'Saoubi, R.; Kopac, J.; Dillon, O.W. Jr.; Jawahir, I.S. (2015) Sustainable machining of high nickel alloy ̶ Inconel 718: Part 2 ̶ Chip breakability and optimization. Journal of Cleaner Production, 87: 941–952.
   Google Scholar
• Pusavec, F.; Hamdi, H.; Kopač, J.; Jawahir, I. S. (2011) Surface Integrity in Cryogenic Machining of Nickel- based Alloy ̶ Inconel 718. Journal of Material Processing Technology, 211: 773–783.
   Google Scholar
• Sandvik Coromant, TCGT 11 03 11-UM 1125, http://www.sandvik.coromant.com/en-us/products/Pages/productdetails.aspx?c=tcgt%2011%2003%2001-um%201125. Last accessed on 3 November 2016
   Google Scholar
• Shet, C.; Deng, X.; Bayoumi, A.E. (2003) Finite element simulation of high-pressure water-jet assisted metal cutting. International Journal of Mechanical Sciences, 45: 1201–1228.
   Google Scholar
• Sun, J.S.; Lee, K.H.; Lee, H.P. (2000) Comparison of implicit and explicit finite element method for dynamic problems. Journal of Materials Processing Technology, 105: 110–118.
   Google Scholar
• Thakur, A.; Gangopadhyay, S. (2015) State-of-the-art in surface integrity in machining of nickel-based super alloys. International Journal of Machine Tools and Manufacture, 100: 25–54.
   Google Scholar
• The Engineering ToolBox, Convective Heat Transfer, http://www.engineeringtoolbox.com/convective-heat-transfer-d_430.html, accesed on 7.10.2016.
   Google Scholar
• The Engineering ToolBox, Liquids and Fluids ˗ Specific Heats, http://www.engineeringtoolbox.com/specific-heat-fluids-d_151.html. Last accessed 9 September 2016.
   Google Scholar
• Uhlmann, E.; von der Schulenburg, M.G.; Zettier, R. (2007) Finite element modeling and cutting simulation of Inconel 718. CIRP Annals—Manufacturing Technology, 56: 61–64.
   Google Scholar
• Yildiz, Y.; Nalbant, M. (2008) A review of cryogenic cooling in machining processes. International Journal of Machine Tools & Manafacture, 48: 947–964.
   Google Scholar