Milling of Ti alloy honeycomb treated by ice fixation in cryogenic

References

• Bilim, A.V.; Farhan, G. (2010) Effect of cell geometry on energy absorption of honeycombs under in-plane compression. AIAA 30URNA, 48: 466–478.
   Web of Science ®Google Scholar
• Calamaz, M.; Coupard, D.; Girot, F. (2008) A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V. International Journal of Machine Tools & Manufacture, 48: 275–288
   Web of Science ®Google Scholar
• Ceretti, E.; Fallbohmer, P.; Wu, W.T. (1996) Application of 2D FEM to chip formation in orthogonal cutting. Journal of Materials Processing Technology, 59: 169–180.
   Web of Science ®Google Scholar
• Ciliberto, A.; Cavaccini, G.; Salvetti, O. (2002) Porosity detection in composite aeronautical structures. Infrared Physics & Technology, 43: 139–143.
   Web of Science ®Google Scholar
• Gao, J.; Liu, Q.Y.; Ma, X.F. (2013) Research on thermal physical parameters and surface temperature field of EDG machining honeycomb ring. ACTA ArmamentarII, 34(11): 1437–1441.
   Google Scholar
• Jeyakrishnan, P.R.; Chockalingam, K.S.K.; Narayanasamy, R. (2013) Studies on buckling behavior of honeycomb sandwich panel. International Journal of Advanced Manufacturing Technology, 65: 803–815.
   Web of Science ®Google Scholar
• Jin, C.Z. (2005) Study on high speed machining process and reliability of fixture method for NOMEX honeycomb. Doctor degree thesis of Zhejiang University, 56–83.
   Google Scholar
• Johnson, G. R.; Cook, W. H. (1988) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Engineering Fraction Mechanical, 21: 31–48.
   Google Scholar
• Kennedy, B. (2008) The variety of composite materials and their application requirements dictate an equally wide range of machining options. Competently Cutting Composites, 60: 45–51.
   Google Scholar
• Lee, B.Y.; Tarng, Y.S. (2000) Cutting-parameter selection for maximizing production rate or minimizing production cost in multistage turning operations. Journal of Materials Processing Technology, 105: 1–66.
   Web of Science ®Google Scholar
• Lorna, G.J.; Ashby, M.F. (1999) Cellular Solids: Structure and Properties. Cambridge University Press, Cambridge. 134–253.
   Google Scholar
• Mahi, A.E.; Khawar, F.M.; Sahraoui, S. (2004) Modeling the flexural behavior of sandwich composite materials under cyclic fatigue. Materials and Design, 25: 199–208.
   Web of Science ®Google Scholar
• Master, I.G.; Evans, K.E. (1996) Models for the elastic deformation of honeycombs. Composite Structures, 35: 403–422.
   Web of Science ®Google Scholar
• Meo, M.; Morris, A.J.; Vignjevic, R. (2003) Numerical simulations of low-velocity impact on an aircraft sandwich panel. Composite Structures, 62: 353–360.
   Web of Science ®Google Scholar
• Mendozam, M. M.; Eman, K. F.; Wu, S. M. (1983) Development of a new milling cutter for aluminum honeycomb. International Journal of Machine Tools & Manufacture, 23: 81–91.
   Web of Science ®Google Scholar
• Nagai, K.; Yuri, T.; Ogat, T. (1991) Cryogenic mechanical properties of Ti-6Al-4V alloys with three levels of oxygen content. ISIJ International, 31: 882–889.
   Web of Science ®Google Scholar
• Papka, S.D.; Kyriadkides, S. (1998) Experiments and full-scale numerical simulations of in-plane crushing of a honeycomb. Acta Materialia, 46: 2765–2776.
   Web of Science ®Google Scholar
• Podolskiy, A. V.; Ng, H. P.; Psaruk, I. A. (2014) Cryogenic equal channel angular pressing of commercially pure titanium: microstructure and properties. Journal of Materials Science, 49: 6803–6812
   Web of Science ®Google Scholar
• Sohn, K.S. (1995) Deformation and fracture behavior of an 8009 Al–Li alloy at cryogenic temperature. Scripta Metallurgica et Materialis, 32: 1255–1265.
   Web of Science ®Google Scholar
• Sutter, G.; List, G. (2013) Very high speed cutting of Ti–6Al–4V titanium alloy-change in morphology and mechanism of chip formation. International Journal of Machine Tools & Manufacture, 66: 37–43
   Web of Science ®Google Scholar
• Xie, J.Q.; Bayoumi, A.E.; Zbib, H.M. (1996) A study on shear banding in chip formation of orthogonal machining. International Journal of Machine Tools & Manufacture, 36: 835–847.
   Web of Science ®Google Scholar
• Yoshimitsu, M. (1984) Characteristics and application of aluminum alloys at cryogenic temperature. R&D Kobe Steel Engineering Reports, 34: 67–75
   Google Scholar
• Zhang, Y.C.; Gu, J.L.; Wang, Z.L. (2010) Optimal design of shock-resistant honeycomb sandwich panel by orthogonal test. ACTA ArmamentarII, 31(1): 279–283.
   Google Scholar