References
- Boutros, T.; Liang, M. (2011) Detection and diagnosis of bearing and cutting tool faults using hidden Markov models. Mechanical Systems and Signal Processing, 25: 2102–2124.
- Bovic, K.; Pierre, D.; Xavier, C. (2011) Tool wear monitoring by machine learning techniques and singular spectrum analysis. Mechanical Systems and Signal Processing, 25: 400–415.
- Bajic, D.; Celent, L.; Jozic, S. (2012) Modeling of the influence of cutting parameters on the surface roughness, tool wear and cutting force in face milling in off-Line process control. Strojniški vestnik – Journal of Mechanical Engineering, 58: 673–682.
- Deiab, I.; Assaleh, K.; Hammad, F. (2009) On modeling of tool wear using sensor fusion and polymonial classifiers. Mechanical Systems and Signal Processing, 23: 1719–1729.
- Emel, E.; Kannatey-Asibu, E. (1998) Tool failure monitoring in turning by pattern recognition analysis of AE signals. Journal of Engineering for Industry, 110: 137–145.
- François, G.; Didier, R.; Jean, F. R. (2010) Tool wear detection in milling—An original approach with a non-dedicated sensor. Mechanical Systems and Signal Processing, 24: 1907–1920.
- Ghani, J. A.; Rizal, M.; Nuawi, M. Z.; Ghazali, M. J.; Haron, C. H. C. (2011) Monitoring online cutting tool wear using low-cost technique and user-friendly GUI. Wear, 271: 2619–2624.
- Huang, N. E.; Shen, Z.; Long, S. R. (1998) The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proceedings of the Royal Society of London, 454A: 903–995.
- Kaya, B.; Oysu, C.; Ertunc, H. M. (2011) Force-torque based on-line tool wear estimation system for CNC milling of Inconel 718 using neural networks. Advances in Engineering Software – AES, 42: 76–84.
- Li, H. K.; Wang, Y. H.;Yang, S. H. (2014) Tool reliability evaluation based acoustic emission. Journal of Dalin University of Technology, 4: 418–423.
- Li, Y. J.; Tse, P. W.; Yang, X. (2010) EMD-based fault diagnosis for abnormal clearance between contacting components in a diesel engine. Mechanical Systems and Signal Processing, 24: 193–210.
- Oliveira, V. V. D.; Beltrão, P .A. C.; Pintaude, G. (2011) Effect of tool geometry on the wear of cemented carbide coated with TiAlN during drilling of compacted graphite iron. Wear, 271: 2561–2569.
- Peng, Z. K.; Tse, P. W.; Chu, E. L. (2005) An improved Hilbert-Huang transform and its application in vibration signal analysis. Journal of Sound and Vibration, 286: 187–205.
- Ravindra, H.; Srinivasa, Y.; Krishnamurthy, R. (1997) Acoustic emission for tool condition monitoring in metal cutting. Wear, 212: 78–84.
- Tobon-Mejia, D. A.; Medjaher, K.; Zerhouni, N. (2012) CNC machine tool's wear diagnostic and prognostic by using dynamic Bayesian networks. Mechanical Systems and Signal Processing, 28: 167–182.
- Wu, Z. H.; Huang, N. E. (2009) Ensemble empirical mode decomposition: A noise assisted data analysis method. Advances in Adaptive Data Analysis, 1: 1–41.
- Xia, J. Z.; Su, T.; Zuang, Y.; Wang, L. (2014) Fault diagnosis method of rolling bearings based on ensemble empirical mode decomposition energy entropy and LS-SVM. Noise and Vibration Control, 34: 170–175.
- Yen, C. L.; Lu, M. C.; Chen, J. L. (2013) Applying the self-organization feature map (SOM) algorithm to AE-based tool wear monitoring in micro-cutting. Mechanical Systems and Signal Processing, 34: 353–366.
- Yang, Y.; Yu, D. J. (2005) Roller bearing fault diagnosis based on Hilbert spectrum. Journal of Vibration and Shock, 24: 70–74.
- Yu, Y.; Yang, P.; Yang, L. J. (2015) Research on acoustic emission signal characteristics of local corrosion on Q235 steel. Acta Acustica, 40: 546–554.
- Zhang, S. C.; Li, D.; Zhang, G. W. (2014) Fundamentals of mechanical manufacturing technology, 3rd ed. Higher Education Press, Beijing.
- Zhong, Y. M.;Qin, S. R.;Tang, B. P. (2002) Study on a new transform method for vibration signal. Journal of Vibration Engineering. 15: 233–238.