Investigate on effect of cryogenic cooling on oxidation wear of WC-Co carbide tool milling titanium alloy

References

• Alborz, S.; Vimal, D.; Stephen, T. (2016) Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti–6Al–4V titanium alloy. Journal of Manufacturing Processes, 21: 172–179.
   Web of Science ®Google Scholar
• Aristizabal, M.; Sanchez, J. M.; Rodriguez, N.; Ibarreta, F.; Martinez, R. (2011) Comparison of the oxidation behaviour of WC–Co and WC–Ni–Co–Cr cemented carbides. Corrosion Science, 53: 2754–2760.
   Web of Science ®Google Scholar
• Basu, S. N.; Sarin, V. K. (1996) Oxidation behavior of WC-Co. Materials Science and Engineering A 209: 206–212.
   Web of Science ®Google Scholar
• Casas, B.; Ramis, X.; Anglada, M.; Salla, J. M.; Llanes, L. (2001) Oxidation-induced strength degradation of WC–Co hardmetals. International Journal of Refractory Metals & Hard Materials, 19: 303–309.
   Web of Science ®Google Scholar
• Chen, D.; Huang, P.Y. (2002) Mechanical properties of pure titanium and titanium alloys at cryogenic temperatures. Mining and Metallurgical Engineering, 22: 111–114.
   Google Scholar
• Chen, H.W. (1995) The effect of cryogenic treatment on the mechanical properties of cemented carbide. Cemented Carbide, 12(1): 33–36.
   Google Scholar
• Cui, X. H. (2006) Study on wear behavior of new-type cast hot-forging die steel. Doctor degree thesis of Jilin University, 34–78.
   Google Scholar
• Ekemar, S.; Lindholm, L.; Hartzcll, T. (1982) Nickel as a binder in WC-based cemented carbides. International Journal of Refractory Metals & Hard Materials, 1: 37–40.
   Google Scholar
• Garbar, I. I. (2002) Gradation of oxidational wear of metal. Tribology International, 35: 749–755.
   Web of Science ®Google Scholar
• Gill, S. S.; Singh, J.; Singh, H.; Singh, R. (2012) Metallurgical and mechanical characteristics of cryogenically treated tungsten carbide (WC–Co). The International Journal of Advanced Manufacturing Technology, 58: 119–131.
   Web of Science ®Google Scholar
• Gong, T. M.; Yao, P.P.; Zuo, X.T. (2016) Influence of WC carbide particle size on the microstructure and abrasive wear behavior of WC-10Co-4Cr coatings for aircraft landing gear. Wear, 362-363: 135–145.
   Web of Science ®Google Scholar
• Handbook of Chemical Engineering (1989) Chemical Engineering Handbook Tenth - Mass Transfer. Chemical Industry Press, Beijing, 56–89.
   Google Scholar
• Hao, Z. P. (2013) Research on related mechanism and high efficiency cutting technology in machining nickel-based superalloy GH4169.Doctor degree thesis of Harbin Institute of Technology, 54–57.
   Google Scholar
• Hartung, P. D.; Kramer, B. M.; Von, Turkovich B F(1982) Tool wear in titanium machining. CIRP Annala - Manufacturing Technology, 31 (1): 75–80.
   Google Scholar
• Hong, S. Y., Markus I, Jeong, W.C. (2001) New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V. International Journal of Machine Tools & Manufacture, 41: 2245–2260.
   Web of Science ®Google Scholar
• Jiang, Z. X.; Sun, J.; Li, G. C. (2015) Investigation on the relationship among tool wear, cutting force and vibration in milling of TC4. Acta Armamentar II, 36(1): 144–150.
   Google Scholar
• Kaynak, Y.; Lu, T.; Jawahir, I. (2014) Cryogenic machining-induced surface integrity: A review and comparison with Dry, MQL, and flood-cooled machining. Machining Science and Technology, 18(2): 149–198.
   Web of Science ®Google Scholar
• Kibria, G.; Sarkar, B. R.; Pradhan, B. B. (2010) Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology, 48(5–8): 557–570.
   Web of Science ®Google Scholar
• Ostberg, G.; Farooq, M. U.; Christensen, M.; Andren, H. O.; Klement, U.; Wahnstrom, G. (2006) Mechanisms of plastic deformation of WC-Co and Ti(C,N)-WC-Co. International Journal of Refractory Metals & Hard Materials, 24: 135–139.
   Web of Science ®Google Scholar
• Ostberg, G.; Farooq, M. U. (2006) Effect of ∑2 grain boundaries on plastic deformation of WC-Co cemented carbides. Materials Science and Engineering A, 416: 119–125.
   Web of Science ®Google Scholar
• Seah, K.H.W.; Rahman, M.; Yong, K.H. (2003) Performance evaluation of cryogenically treated tungsten carbide cutting tool inserts. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 217(1): 29–43.
   Web of Science ®Google Scholar
• Shalaby, M. A.; Veldhuis S. C. (2018) Some observations on flood and dry finish turning of the Ti-6Al-4V aerospace alloy with carbide and PCD tools. The International Journal of Advanced Manufacturing Technology, 99: 2939–2957.
   Web of Science ®Google Scholar
• Shao, F. (2010) Thermodynamical characteristics of tool wear when cutting difficult-to-cut material. Doctor degree thesis of Shandong University, 56–88.
   Google Scholar
• Venugopal, K. A.; Paul, S.; Chattopadhyay, A. B. (2007a) Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling. Wear, 262 (9–10): 1071–1078.
   Web of Science ®Google Scholar
• Venugopal, K. A.; Paul, S.; Chattopadhyay, A. B. (2007b) Tool wear in cryogenic turning of Ti-6Al-4V alloy. Cryogenics, 47: 12–18.
   Web of Science ®Google Scholar
• Voitovich, R. F.; Pugach, E. A. (1973) Features of high temperature oxidation of transition metal carbides of VI groups. Poroshkovaya Metallurgiya, 4: 59–64.
   Google Scholar
• Voitovich, V. B.; Sverdel, V. V.; Voitovich, R. F.; Golovko, E. I. (1996) Oxidation of WC-Co, WC-Ni and WC-Co-Ni hard metals in the temperature range 500 ∼ 800 °C. International Journal of Refractory Metals & Hard Materials, 14: 289–295.
   Web of Science ®Google Scholar
• Wang, F.B; Liu, J.K.; Shu, Q. L. (2017) Milling wear of carbide tool for processing nickel-based alloy in cryogenic based on the entropy change. The International Journal of Advanced Manufacturing Technology, 90: 1703–1713.
   Web of Science ®Google Scholar
• Wang, F.B; Wang, Y.Q.; Liu, H. B. (2018) Tool wear behavior of thermal-mechanical effect for milling Ti-6Al-4V alloy in cryogenic. The International Journal of Advanced Manufacturing Technology, 94: 2077–2088.
   Web of Science ®Google Scholar
• Wang, L. L.; Li, H. Y.; Liu, N. (2011) Effects of Co content on microstructure and mechanical properties of cemented carbides. Rare Metals and Cemented Carbides, 39 (1): 66–69.
   Google Scholar
• Wu, Z.; Yang, Y.; Su, C.; Cai, X. (2017) Development and prospect of cooling technology for dry cutting tools. The International Journal of Advanced Manufacturing Technology, 88: 1567–1577.
   Web of Science ®Google Scholar
• Ye, D. L.; Hu, J. H. (2002) Utility Thermodynamic Data Manual (Version 2). Metallurgical Industry Press, Beijing, 61–424.
   Google Scholar
• Zhang, S.; Li, J. F.; Deng, J. X.; Li, Y. S. (2009) Investigation on diffusion wear during high-speed machining Ti-6Al-4V alloy with straight tungsten carbide tools. The International Journal of Advanced Manufacturing Technology, 44: 17–25.
   Web of Science ®Google Scholar
• Zhou, W. L. (2010) Investigation on low temperature upsetting deformation behavior of TC4 titanium alloy. Doctor degree thesis of Dalian University of Technology, 51–56.
   Google Scholar