Analysis of subsurface defects occurrence in abrasion resistant Creusabro steel after WEDM including the study of morphology and surface topography

References

• Azam, M.; Jahanzaib, M.; Abbasi, J.A.; Abbas, M.; Wasim.; Hussain, A.S. (2016) Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel. The International Journal of Advanced Manufacturing Technology, 87(1–4): 713–722.
   Web of Science ®Google Scholar
• Azam, M.; Jahanzaib, M.; Abbasi, J.A.; Wasim, A. (2016) Modeling of cutting speed (CS) for HSLA steel in wire electrical discharge machining (WEDM) using moly wire. Journal of the Chinese Institute of Engineers, 39(7): 802–808.
   Web of Science ®Google Scholar
• Ficker, T.; Martišek, D. (2015) Alternative method for assessing the roughness coefficients of rock joints. Journal of Computing in Civil Engineering, 30(4): 1–14. doi:10.1061/(ASCE)CP.1943-5487.0000540.
   Web of Science ®Google Scholar
• Geometrical Product Specifications [GPS]. (1996) Surface Texture: Profile Method; Surfaces Having Stratified Functional properties - Part 2: Height Characterization Using the Linear Material Ratio Curve. ISO 13565-2. International Organization for Standardization, Geneva.
   Google Scholar
• Geometrical Product Specifications [GPS]. (1997) Surface Texture: Profile method -Terms, Definitions and Surface Texture Parameters. ISO 4287. International Organization for Standardization, Geneva.
   Google Scholar
• Geometrical Product Specifications [GPS]. (2012) Surface Texture: Areal -Part 2: Terms, Definitions and Surface Texture Parameters. ISO 25178-2. International Organization for Standardization, Geneva.
   Google Scholar
• Gupta, K.; Jain, N.K. (2014) On surface integrity of miniature spur gears manufactured by wire electrical discharge machining. The International Journal of Advanced Manufacturing Technology, 72(9–12): 1735–1745.
   Web of Science ®Google Scholar
• Harcarik, M.; Jankovych, R. (2016) Relationship between values of profile and areal surface texture parameters. MM Science Journal, 5: 1659–1662.
   Google Scholar
• Hasçalýk, A.; Çaydaş, U. (2004) Experimental study of wire electrical discharge machining of AISI D5 tool steel. Journal of Material Processing Technology, 148(3): 362–367.
   Web of Science ®Google Scholar
• Hashmi, S. (2016) Comprehensive Materials Finishing. Elsevier, Dublin, Ireland. ISBN: 978-0-12-803249-7.
   Google Scholar
• Huang, C.A.; Hsu, C.C.; Kuo, H.H. (2003) The surface characteristics of P/M high-speed steel (ASP 23) multi-cut with wire electrical discharge machine (WEDM). Journal of Materials Processing Technology, 140(1–3): 298–302.
   Google Scholar
• Huang, C.A.; Hsu, F.Y.; Yao, S.J. (2004) Microstructure analysis of the martensitic stainless steel surface fine-cut by the wire electrode discharge machining (WEDM). Materials Science and Engineering: A, 371(1–2): 119–126.
   Web of Science ®Google Scholar
• Jangra, K. (2012) Study of unmachined area in intricate machining after rough cut in WEDM. International Journal of Industrial Engineering Computations, 3(5): 887–892.
   Google Scholar
• Jiang, X.J.; Whitehouse, D.J. (2012) Technological shifts in surface metrology. CIRP - Annals Manufacturing Technology, 61(2): 815–836.
   Web of Science ®Google Scholar
• Khanna, R.; Singh, H. (2016) Comparison of optimized settings for cryogenic-treated and normal D-3 steel on WEDM using grey relational theory. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(1): 219–232.
   Web of Science ®Google Scholar
• Knight, W.A.; Boothroyd, G. (2005) Fundamentals of Metal Machining and Machine Tools, 3rd ed. CRC Press. ISBN 1574446592.
   Google Scholar
• McGeough, J.A. (1988) Advanced Methods of Machining. Springer Science and Business Media, Chapman and Hall, London.
   Google Scholar
• Montgomery, D.C. (2017) Design and Analysis of Experiments, 9th ed. Wiley, Arizona state university, Arizona. ISBN 978-1-119-11347-8.
   Google Scholar
• Mouralova, K. (2015) Modernítechnologiedrátovéhoelektroerozivníhořezáníkovovýchslitin. Thesis. CERM, Brno. ISBN 80-214-2131-2.
   Google Scholar
• Mouralova, K.; Klakurkova, L.; Matousek, R.; Prokes, T.; Hrdy, R.; Kana, V. (2018a) Influence of the cut direction through the semi-finished product on the occurrence of cracks for X210Cr12 steel using WEDM. Archives of Civil and Mechanical Engineering, 18(4): 1318–1331.
   Web of Science ®Google Scholar
• Mouralova, K.; Kovar, J.; Klakurkova, L.; Bednar, J.; Benes, L.; Zahradnicek, R. (2018b) Analysis of surface morphology and topography of pure aluminium machined using WEDM. Measurement, 114: 169–176.
   Web of Science ®Google Scholar
• Mouralova, K.; Kovar, J.; Klakurkova, L.; Blazik, P.; Kalivoda, M.; Kousal, P. (2018c) Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment. Measurement, 116: 556–564.
   Web of Science ®Google Scholar
• Mouralova, K.; Kovar, J.; Klakurkova, L.; Prokes, T. (2018d) Effect of width of kerf on machining accuracy and subsurface layer after WEDM. Journal of Materials Engineering and Performance, 27(4): 1908–1916.
   Web of Science ®Google Scholar
• Mouralova, K.; Kovar, J.; Klakurkova, L.; Prokes, T.; Horynova, M. (2017) Comparison of morphology and topography of surfaces of WEDM machined structural materials. Measurement, 104: 12–20.
   Web of Science ®Google Scholar
• Mouralova, K.; Zahradnicek, R.; Houska, P. (2016) Evaluation of surface quality of X210CR12 steel for forming tools machined by WEDM. MM Science Journal, 2016(05): 1366–1369.
   Google Scholar
• Muthukumar, V.; Babu, A.S.; Venkatasamy, R.; Kumar, N.S. (2015) An accelerated particle swarm optimization algorithm on parametric optimization of WEDM of die-steel. Journal of the Institution of Engineers (India): Series C, 96(1): 49–56.
   Google Scholar
• Petropoulos, G.P.; Pandazaras, C.N.; Davim, J.P. (2010) Surface texture characterization and evaluation related to machining. In Surface Integrity in Machining, Springer, London, UK, 37–66.
   Google Scholar
• Ranjan, R. (2016) Optimization of Wire Electrical Discharge Machining: An Overview on Research Trends, 1st ed. LAP LAMBERT Academic Publishing, Germany. ISBN: 978-3-659-88968-4.
   Google Scholar
• Shakeri, S.; Ghassemi, A.; Hassani, M.; Hajian, A. (2016) Investigation of material removal rate and surface roughness in wire electrical discharge machining process for cementation alloy steel using artificial neural network. The International Journal of Advanced Manufacturing Technology, 82(1–4): 549–557.
   Web of Science ®Google Scholar
• Sharma, N.; Khanna, R.; Gupta, R.D. (2015) WEDM process variables investigation for HSLA by response surface methodology and genetic algorithm. Engineering Science and Technology, an International Journal, 18(2): 171–177.
   Google Scholar
• Singh, V.; Bhandari, R.; Yadav, V.K. (2017) An experimental investigation on machining parameters of AISI D2 steel using WEDM. The International Journal of Advanced Manufacturing Technology, 93(1–4): 203–214.
   Web of Science ®Google Scholar
• Tosun, N.; Cogun, C. (2003) An investigation on wire wear in WEDM. Journal of Materials Processing Technology, 134(3): 273–278.
   Web of Science ®Google Scholar
• Vates, U.K. (2018) Wire-EDM Process Parameters and Optimization. Scholars Press, Latvia, ISBN: 978-620-2-30578-5.
   Google Scholar