Cryogenic drilling of aluminum-based printed circuit boards: a review and analysis

References

• Bhandari, B.; Hong, Y.; Yoon, H.; Moon, J.; Pham, M.; Lee, G.; Huang, Y.; Linke, B.; Dornfeld, D.; Ahn, S. (2014) Development of a micro-drilling burr-control chart for PCB drilling. Precision Engineering, 38(1): 221–229.
   Web of Science ®Google Scholar
• Bi, S.; Liang, J. (2011) Experimental studies and optimization of process parameters for burr in dry drilling of stacked metal materials. The International Journal of Advanced Manufacturing Technology, 53(9–12): 867–876.
   Web of Science ®Google Scholar
• Biermann, D.; Hartmann, H. (2012) Reduction of burr formation in drilling using cryogenic process cooling. Procedia CIRP, 3(1): 85–90.
   Google Scholar
• Chang, S.; Bone, G. (2010) Burr height model for vibration assisted drilling of aluminum 6061-T6. Precision Engineering, 34(3): 369–375.
   Web of Science ®Google Scholar
• Fu, L.; Guo, Q. (2012) On-line temperature measurement of a micro drill bit. Circuit World, 38(2): 55–58.
   Web of Science ®Google Scholar
• Giasin, K.; Hodzic, A.; Phadnis, V.; Ayvar-Soberanis, S. (2016) Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study. The International Journal of Advanced Manufacturing Technology, 87(5–8): 2041–2026.
   Web of Science ®Google Scholar
• He, L.; Wu, H.; Wang, Z. (2016) Drilling technology research of PCB aluminum substrate based on drilling forces. Equipment for Electronic Products Manufacturing 258: 38–42, (In Chinese).
   Google Scholar
• Huang, X.; Zheng, L.J.; Wang, C.Y.; Wang, L.F.; Lin, D.T.; Liao, B.; Zhang, L. (2016) Drilling characteristics of entry board and the influence on PCB micro drilling process. Microsystems, Packaging, Assembly & Circuits Technology Conference. Taibei, IEEE.
   Google Scholar
• Islam, M.; Boswell, B. (2016). Effects of canned cycles and cutting parameters on hole quality in cryogenic drilling of aluminium 6061-6. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering 10(7): 822–830.
   Google Scholar
• Kim, D.; Lee, Y.; Chu, C.; Oh, Y. (2006). Prevention of exit burr in micro-drilling of metal foils by using a cyanoacrylate adhesive. The International Journal of Advanced Manufacturing Technology 27(11–12): 1071–1076.
   Web of Science ®Google Scholar
• Kitajima, K.; Yamamoto, A.; Miyake, T.; Takazawa, K. (2005) Influence of workpiece temperature on burr formation in drilling. Journal of the Japan Society for Precision Engineering Contributed Papers 71(2): 252–256.
   Google Scholar
• Li, X.; Ye, H.; Liu, Z. (2014) Study about how to avoid drilling burr of aluminum core PCB. Printed Circuit Information 2:62–64, (In Chinese).
   Google Scholar
• Liu, G.; Zhang, L. (2014) A drilling method for PTFE-containing multilayer printed boards. Chinese patent, CN103537724A.
   Google Scholar
• Najiha, M.; Rahman, M.; Kadirgama, K. (2015) Machining performance of aluminum alloy 6061-T6 on surface finish using minimum quantity lubrication. International Journal of Automotive and Mechanical Engineering 11(1): 2699–2712.
   Google Scholar
• Shen, Z.; Wang, H.; Li, G. (2010) Feasibility analysis of coiled tubing drilling with supercritical carbon dioxide. Petroleum Exploration and Development 37(6): 743–747.
   Google Scholar
• Shi, J.; Gao, Y. (2002) Development state and application for metal PCB substrate. Electronic Component & Device Applications (In Chinese).
   Google Scholar
• Singh, G.; Sharma, V.S.; Gupta, M. (2017) Sustainable drilling of aluminum 6061-T6 alloy by using nano-fluids and Ranque-Hilsch vortex tube assisted by MQL: an optimization approach. International Journal of Machining & Machinability of Materials.
   Google Scholar
• Song, H. (2002) Discussion on processing of cold air thin-walled stainless steel parts. Aviation Precision Manufacturing Technology 38(6): 40–41.
   Google Scholar
• Subramani, S.; Devarajan, M. (2016) Testing and analysis of boron-doped aluminum nitride thin-film-coated Al as thermal substrates in PCB fabrication for led application. IEEE Transactions on Electron Devices 63(12): 4839–4844.
   Web of Science ®Google Scholar
• Tang, H.; Wang, C.; Wang, B.; Wang, L.; Hu, S.; Chen, Z. (2010) Experimental and FEM modal analysis of workbench for PCB drilling machine. Advanced Materials Research 139–141: 2446–2451.
   Google Scholar
• Tang, H.; Wen, J.; Wang, C.; Wu, L.; Song, Y. (2011) Simulation of drilling on the copper of PCB with ultra-high-speed. Advanced Materials Research 188: 739–742.
   Google Scholar
• Thakre, A.; Soni, S. (2016) Modeling of burr size in drilling of aluminum silicon carbide composites using response surface methodology. Engineering Science & Technology an International Journal 19(3): 1199–1205.
   Google Scholar
• Wang, C.; Liao, B.; Zheng, L.; Lin, D.; Huang, X. (2015) Device and method for measuring drilling temperature of multi-layer PCB drilling. Chinese patent, ZL104568212A.
   Google Scholar
• Wei, C.; Gu, Z.; Zhang, C. (2008) Application of dry cold air cutting technology in grinding. Metal Processing 14: 27–29.
   Google Scholar
• Xia, T.; Kaynak, Y.; Arvin, C.; Jawahir, I. (2015) Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material. International Journal of Advanced Manufacturing Technology 82(1–4): 1–12.
   Web of Science ®Google Scholar
• Yan, H.; Gong, X. (2010) Equipment for processing PCB board parts of PTFE materials. Chinese patent, CN201657508U.
   Google Scholar
• Yang, L.; Huang, L.; Wang, C.; Zheng, L.; Ma, P.; Song, Y. (2011) Drilling force and chip morphology in drilling of PCB supported hole. Advanced Materials Research 188: 429.
   Google Scholar
• Yildiz, Y.; Nalbant, M. (2008) A review of cryogenic cooling in machining processes. International Journal of Machine Tools and Manufacture 48(9): 947–953.
   Web of Science ®Google Scholar
• Zhang, C.; Dong, M. (2003) Dry, semi-dry and cold air cutting technology. Tool Technology 12: 34–35.
   Google Scholar
• Zhang, X.; Wang, C.Y.; Zheng, L.J.; Wang, L.F.; Song, Y.X. (2012) Experimental study on cutting force of high-speed micro-drilling flexible printed circuit board. Materials Science Forum 723: 401.
   Google Scholar
• Zheng, L.; Wang, C.; Qu, Y.; Yang, L.; Song, Y. (2011) The investigation of thrust force of printed circuit board drilling. Key Engineering Materials 496: 259.
   Google Scholar
• Zheng, L.; Wang, C.; Yang, L.; Song, Y.; Fu, L. (2012) Characteristics of chip formation in the micro-drilling of multi-material sheets. International Journal of Machine Tools and Manufacture 52(1): 40–49.
   Web of Science ®Google Scholar
• Zheng, L.; Wang, C.; Zhang, X.; Huang, X.; Song, Y.; Wang, K.; Zhang, L. (2016) The tool-wear characteristics of flexible printed circuit board micro-drilling and its influence on micro-hole quality. Circuit World 42(4): 162–169.
   Web of Science ®Google Scholar