Effect of MQL flow rate on machinability of AISI 4140 steel

References

• Ali, S.M.; Dhar, N.R.; Dey, S.K. (2011) Effect of minimum quantity lubrication (MQL) on cutting performance in turning medium carbon steel by uncoated carbide insert at different speed-feed combinations. Advances in Production Engineering & Management, 6: 185–196.
   Google Scholar
• Antonialli, A.Í.S.; Mendes Filho, A. A.; Sordi, V.L.; Ferrante, M. (2012) The machinability of ultrafine-grained grade 2 Ti processed by equal channel angular pressing. Journal of Materials Research and Technology, 1(3): 148–153. doi:10.1016/S2238-7854(12)70026-1
   Google Scholar
• Behera, B.C.; Ghosh, S.; Rao, P.V. (2018) Modeling of cutting force in MQL machining environment considering chip tool contact friction. Tribology International, 117: 283–295. doi:10.1016/j.triboint.2017.09.015
   Web of Science ®Google Scholar
• Bruni, C.; Forcellese, A.; Gabrielli, F.; Simoncini, M. (2006) Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B. International Journal of Machine Tools and Manufacture, 46(12–13): 1547–1554. doi:10.1016/j.ijmachtools.2005.09.007
   Web of Science ®Google Scholar
• Çakır, A.; Yağmur, S.; Kavak, N.; Küçüktürk, G.; Şeker, U. (2016) The effect of minimum quantity lubrication under different parameters in the turning of AA7075 and AA2024 aluminium alloys. The International Journal of Advanced Manufacturing Technology, 84(9–12): 2515–2521. doi:10.1007/s00170-015-7878-4
   Web of Science ®Google Scholar
• Çelik, E.; Kıvak, T. (2016) Effect of minimum quantity lubrication on surface roughness in turning of 17-4 PH stainless steel. 7th International Symposium on Machining, Istanbul, Turkey, 214–221.
   Google Scholar
• Çiftçi, İ. (2006) Machining of austenitic stainless steels using CVD multi-layer coated cemented carbide tools. Tribology International, 39: 565–569.
   Web of Science ®Google Scholar
• Das, A.; Tirkey, N.; Patel, S.K.; Das, S.R.; Biswal, B.B. (2019) A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1): 115–130. doi:10.1007/s11668-018-0574-6
   Web of Science ®Google Scholar
• Das, S.R.; Kumar, A.; Dhupal, D. (2016) Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using CBN tool. International Journal of Machining and Machinability of Materials, 18(5/6): 501–521. doi:10.1504/IJMMM.2016.078997
   Google Scholar
• Davim, J.P.; Silva, L.R.; Festas, A.; Abrão, A.M. (2009) Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing. Materials & Design, 30(2): 228–234. doi:10.1016/j.matdes.2008.05.003
   Web of Science ®Google Scholar
• Davim, J.P.; Sreejith, P.S.; Silva, J. (2007) Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions. Materials and Manufacturing Processes, 22(1): 45–50. doi:10.1080/10426910601015881
   Web of Science ®Google Scholar
• Dhar, N.R.; Ahmed, M.T.; Islam, S. (2007) An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel. International Journal of Machine Tools and Manufacture, 47(5): 748–753. doi:10.1016/j.ijmachtools.2006.09.017
   Web of Science ®Google Scholar
• Dhar, N.R.; Kamruzzaman, M.; Ahmed, M. (2006) Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel. Journal of Materials Processing Technology, 172(2): 299–304. doi:10.1016/j.jmatprotec.2005.09.022
   Web of Science ®Google Scholar
• Diniz, A.E.; Ferreira, J.R.; Filho, F.T. (2003) Influence of refrigeration/lubrication condition on SAE 52100 hardened steel turning at several cutting speeds. International Journal of Machine Tools and Manufacture, 43(3): 317–326. doi:10.1016/S0890-6955(02)00186-4
   Web of Science ®Google Scholar
• Frăţilă, D.; Caizar, C. (2012) Investigation of the influence of process parameters and cooling method on the surface quality of AISI-1045 during turning. Materials and Manufacturing Processes, 27(10): 1123–1128. doi:10.1080/10426914.2012.677905
   Web of Science ®Google Scholar
• Gaitonde, V.N.; Karnik, S.R.; Davim, J.P. (2008) Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass. Journal of Materials Processing Technology, 204(1–3): 459–464. doi:10.1016/j.jmatprotec.2007.11.193
   Web of Science ®Google Scholar
• Hadad, M.; Sadeghi, B. (2013) Minimum quantity lubrication-MQL turning of AISI 4140 steel alloy. Journal of Cleaner Production, 54: 332–343. doi:10.1016/j.jclepro.2013.05.011
   Web of Science ®Google Scholar
• Hameedullah, M.; Abhnag, L.B. (2010) Experimental investigation of minimum quantity lubricants. International Journal of Engineering, Science and Technology, 2: 3045–3053.
   Google Scholar
• Hemaid, A.; Tawfeek, T.; Ibrahim, A.A. (2016) Experimental investigation on surface finish during turning of aluminum under dry and minimum quantity lubrication machining conditions. American Journal of Materials Engineering and Technology, 4: 1–5.
   Google Scholar
• Hwang, Y.K.; Lee, C.M. (2010) Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments. Journal of Mechanical Science and Technology, 24(8): 1669–1677. doi:10.1007/s12206-010-0522-1
   Web of Science ®Google Scholar
• Ilhan, M.; Çavuşoğlu, O.; Duran, A.; Şeker, U. (2013) Metal removal processes minimum quantity of lubrication (MQL) application depending on cutting speed and flow rate research of the impact on surface roughness. 4th International Symposium on Machining, Aydin, Turkey, 637–644.
   Google Scholar
• Isik, Y. (2007) Investigating the machinability of tool steels in turning operations. Materials & Design, 28(5): 1417–1424. doi:10.1016/j.matdes.2006.03.025
   Web of Science ®Google Scholar
• Ji, X.; Li, B.; Zhang, X.; Liang, S.Y. (2014) The effects of minimum quantity lubrication (MQL) on machining force, temperature, and residual stress. International Journal of Precision Engineering and Manufacturing, 15(11): 2443–2451. doi:10.1007/s12541-014-0612-6
   Web of Science ®Google Scholar
• Kamata, Y.; Obikawa, T. (2007) High speed MQL finish-turning of Inconel 718 with different coated tools. Journal of Materials Processing Technology, 192–193: 281–286. doi:10.1016/j.jmatprotec.2007.04.052
   Web of Science ®Google Scholar
• Khan, M.M.A.; Dhar, N.R. (2006) Performance evaluation of minimum quantity lubrication by vegetable oil in terms of cutting force, cutting zone temperature, tool wear, job dimension and surface finish in turning AISI-1060 steel. Journal of Zhejiang University-SCIENCE A, 7(11): 1790–1799. doi:10.1631/jzus.2006.A1790
   Google Scholar
• Khan, M.M.A.; Mithu, M.A.H.; Dhar, N.R. (2009) Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid. Journal of Materials Processing Technology, 209(15–16): 5573–5583. doi:10.1016/j.jmatprotec.2009.05.014
   Web of Science ®Google Scholar
• Kumar, S.; Singh, D.; Kalsi, N.S. (2017) Analysis of surface roughness during machining of hardened AISI 4340 steel using minimum quantity lubrication. Materials Today: Proceedings, 4(2): 3627–3635. doi:10.1016/j.matpr.2017.02.255
   Google Scholar
• Lalbondre, R.; Krishna, P.; Mohankumar, G.C. (2014) An experimental investigation on machinability studies of steels by face turning. Procedia Materials Science, 6: 1386–1395. doi:10.1016/j.mspro.2014.07.118
   Google Scholar
• Liu, Z.; Cong, W.; Kim, H.; Ning, F.; Jiang, Q.; Li, T.; Zhang, H.; Chao.; Zhou, Y. (2017) Feasibility exploration of superalloys for AISI 4140 steel repairing using laser engineered net shaping. Procedia Manufacturing, 10: 912–922. doi:10.1016/j.promfg.2017.07.080
   Google Scholar
• Lv, L.; Fu, L.; Ahmad, S.; Shan, A. (2017) Effect of heavy warm rolling on microstructures and mechanical properties of AISI 4140 steel. Materials Science and Engineering: A, 704: 469–479. doi:10.1016/j.msea.2017.07.089
   Web of Science ®Google Scholar
• Mallesha, V.; Nayaka, H.S. (2018) Turning process on EN47 spring steel with different tool nose radii using OFAT approach. Advances in Modelling and Analysis A, 55(2): 43–46.
   Google Scholar
• Masoudi, S.; Vafadar, A.; Hadad, M.; Jafarian, F. (2018) Experimental investigation into the effects of nozzle position, workpiece hardness, and tool type in MQL turning of AISI 1045 steel. Materials and Manufacturing Processes, 33(9): 1011–1019. doi:10.1080/10426914.2017.1401716
   Web of Science ®Google Scholar
• Meysami, A.H.; Ghasemzadeh, R.; Seyedein, S.H.; Aboutalebi, M.R. (2010) An investigation on the microstructure and mechanical properties of quenched and tempered AISI 4140 steel. Materials & Design, 31(3): 1570–1575. doi:10.1016/j.matdes.2009.09.040
   Web of Science ®Google Scholar
• Mitsubishi Carbide. (2019) Guide to Turning Inserts. Japan, A034–A035.
   Google Scholar
• Obikawa, T.; Ohno, T.; Maetani, T.; Ozaki, Y. (2018) Machining of sintered steel under different lubrication conditions. Machining Science and Technology, 22(2): 338–352. doi:10.1080/10910344.2017.1365893
   Web of Science ®Google Scholar
• Pathak, B.N.; Sahoo, K.L.; Mishra, M. (2013) Effect of machining parameters on cutting forces and surface roughness in Al-(1-2) Fe-1V-1Si alloys. Materials and Manufacturing Processes, 28(4): 463–469. doi:10.1080/10426914.2013.763952
   Web of Science ®Google Scholar
• Paturi, U.M.R.; Maddu, Y.R.; Maruri, R.R.; Narala, S.K.R. (2016) Measurement and analysis of surface roughness in WS2 solid lubricant assisted minimum quantity lubrication (MQL) turning of Inconel 718. Procedia CIRP, 40: 138–143. doi:10.1016/j.procir.2016.01.082
   Google Scholar
• Rahim, E.A.; Ibrahim, M.R.; Rahim, A.A.; Aziz, S.; Mohid, Z. (2015) Experimental investigation of minimum quantity lubrication (MQL) as a sustainable cooling technique. Procedia CIRP, 26: 351–354. doi:10.1016/j.procir.2014.07.029
   Google Scholar
• Saini, A.; Dhiman, S.; Sharma, R.; Setia, S. (2014) Experimental estimation and optimization of process parameters under minimum quantity lubrication and dry turning of AISI-4340 with different carbide inserts. Journal of Mechanical Science and Technology, 28(6): 2307–2318. doi:10.1007/s12206-014-0521-8
   Web of Science ®Google Scholar
• Sani, A.S.A.; Rahim, E.A.; Samion, S. (2017) Tribological performance of modified jatropha oil containing oil-miscible ionic liquid for machining applications. Journal of Mechanical Science and Technology, 31(12): 5675–5685. doi:10.1007/s12206-017-1108-y
   Web of Science ®Google Scholar
• Sani, A.S.A.; Rahim, E.A.; Sharif, S.; Sasahara, H. (2019a) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129: 347–362. doi:10.1016/j.triboint.2018.08.038
   Web of Science ®Google Scholar
• Sani, A.S.A.; Rahim, E.A.; Sharif, S.; Sasahara, H. (2019b) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209: 947–964. doi:10.1016/j.jclepro.2018.10.317
   Web of Science ®Google Scholar
• Sarikaya, M.; Güllü, A. (2014) Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL. Journal of Cleaner Production, 65: 604–616. doi:10.1016/j.jclepro.2013.08.040
   Web of Science ®Google Scholar
• Sarikaya, M.; Güllü, A. (2015) Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25. Journal of Cleaner Production, 91: 347–357. doi:10.1016/j.jclepro.2014.12.020
   Web of Science ®Google Scholar
• Sayuti, M.; Sarhan, A.A.D.; Salem, F. (2014) Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption. Journal of Cleaner Production, 67: 265–276. doi:10.1016/j.jclepro.2013.12.052
   Web of Science ®Google Scholar
• Sreejith, P.S. (2008) Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions. Materials Letters, 62(2): 276–278. doi:10.1016/j.matlet.2007.05.019
   Web of Science ®Google Scholar
• STN ISO 3685. (1999) Tool-Life Testing with Single-Point Turning Tools, Turkey, 1–53
   Google Scholar
• Trent, E.M. (1989) Metal Cutting. Butterworths Press, London, 1–171.
   Google Scholar
• Ulutan, M.; Celik, O.N.; Gasan, H.; Er, U. (2010) Effect of different surface treatment methods on the friction and wear behavior of AISI 4140 steel. Journal of Materials Science & Technology, 26(3): 251–257. doi:10.1016/S1005-0302(10)60042-4
   Web of Science ®Google Scholar
• Yazid, M.Z.A.; Ibrahim, G.A.; Said, A.Y.M.; CheHaron, C.H.; Ghani, J.A. (2011) Surface integrity of Inconel 718 when finish turning with PVD coated carbide tool under MQL. Procedia Engineering, 19: 396–401. doi:10.1016/j.proeng.2011.11.131
   Google Scholar
• Yıldırım, Ç.V.; Kıvak, T.; Sarıkaya, M.; Mert, Ş. (2016) Investigation of the effect on surface roughness of the minimum quantity lubrication (MQL) parameters in turning of AISI 4340. 7th International Symposium on Machining, Istanbul, Turkey, 1–16.
   Google Scholar