Tool wear rate prediction in ultrasonic vibration-assisted milling

References

• Abdur-Rasheed, A. (2011) A fundamental study of vibration assisted machining. Advanced Materials Research, 264–265: 1702–1707. doi:10.4028/www.scientific.net/AMR.264-265.1702
   Google Scholar
• Agmell, M.; Ahadi, A.; Ståhl, J.-E. (2014) Identification of plasticity constants from orthogonal cutting and inverse analysis. Mechanics of Materials, 77: 43–51. doi:10.1016/j.mechmat.2014.07.005
   Web of Science ®Google Scholar
• Chen, W.; Huo, D.; Shi, Y.; Hale, J.M. (2018) State-of-the-art review on vibration-assisted milling: Principle, system design, and application. The International Journal of Advanced Manufacturing Technology, 97(5–8): 2033–2049. doi:10.1007/s00170-018-2073-z
   Web of Science ®Google Scholar
• Denkena, B.; Grove, T.; Dittrich, M.A.; Niederwestberg, D.; Lahres, M. (2015) Inverse determination of constitutive equations and cutting force modelling for complex tools using Oxley’s predictive machining theory. Procedia CIRP, 31: 405–410. doi:10.1016/j.procir.2015.03.012
   Google Scholar
• Feng, Y.; Hung, T.-P.; Lu, Y.-T.; Lin, Y.-F.; Hsu, F.-C.; Lin, C.-F.; Lu, Y.-C.; Liang, S.Y. (2019a) Analytical prediction of temperature in laser-assisted milling with laser preheating and machining effects. The International Journal of Advanced Manufacturing Technology, 100(9–12): 3185–3195. doi:10.1007/s00170-018-2930-9
   Web of Science ®Google Scholar
• Feng, Y.; Hung, T.-P.; Lu, Y.-T.; Lin, Y.-F.; Hsu, F.-C.; Lin, C.-F.; Lu, Y.-C.; Liang, S.Y. (2020) Inverse analysis of the residual stress in laser-assisted milling. The International Journal of Advanced Manufacturing Technology, 106: 2463–2475. doi:10.1007/s00170-019-04794-9
   Google Scholar
• Feng, Y.; Hung, T.-P.; Lu, Y.-T.; Lin, Y.-F.; Hsu, F.-C.; Lin, C.-F.; Lu, Y.-C.; Liang, S.Y. (2019c) Inverse analysis of the tool life in laser-assisted milling. The International Journal of Advanced Manufacturing Technology, 103(5–8): 1947–1958. doi:10.1007/s00170-019-03695-1
   Web of Science ®Google Scholar
• Feng, Y.; Hung, T.-P.; Lu, Y.-T.; Lin, Y.-F.; Hsu, F.-C.; Lin, C.-F.; Lu, Y.-C.; Lu, X.; Liang, S.Y. (2018) Inverse analysis of Inconel 718 laser-assisted milling to achieve machined surface roughness. International Journal of Precision Engineering and Manufacturing, 19(11): 1611–1618. doi:10.1007/s12541-018-0188-7
   Web of Science ®Google Scholar
• Feng, Y.; Lu, Y.-T.; Lin, Y.-F.; Hung, T.-P.; Hsu, F.-C.; Lin, C.-F.; Lu, Y.-C.; Liang, S.Y. (2018) Inverse analysis of the cutting force in laser-assisted milling on Inconel 718. The International Journal of Advanced Manufacturing Technology, 96(1–4): 905–914. doi:10.1007/s00170-018-1670-1
   Web of Science ®Google Scholar
• Feng, Y.; Pan, Z.; Liang, S.Y. (2018) Temperature prediction in Inconel 718 milling with microstructure evolution. The International Journal of Advanced Manufacturing Technology, 95(9–12): 4607–4621. doi:10.1007/s00170-018-1581-1
   Web of Science ®Google Scholar
• Hafiz, M.S.A.; Kawaz, M.H.A.; Mohamad, W.N.F.; Kasim, M.S.; Izamshah, R.; Saedon, J.B.; Mohamed, S.B. (2017) A review on feasibility study of ultrasonic assisted machining on aircraft component manufacturing. IOP Conference Series: Materials Science and Engineering, 270: 012034. doi:10.1088/1757-899X/270/1/012034
   Google Scholar
• Halim, N.F.H.A.; Ascroft, H.; Barnes, S. (2017) Analysis of tool wear, cutting force, surface roughness and machining temperature during finishing operation of ultrasonic assisted milling (UAM) of carbon fibre reinforced plastic (CFRP). Procedia Engineering, 184: 185–191. doi:10.1016/j.proeng.2017.04.084
   Google Scholar
• Hsu, C.Y.; Tsao, C.C.; Huang, C.H.; Lin, Y.C. (2009) A study on ultrasonic vibration milling of Inconel 718. Key Engineering Materials, 419–420: 373–377. doi:10.4028/www.scientific.net/KEM.419-420.373
   Google Scholar
• Huang, Y. (2002) Predictive modeling of tool wear rate with application to CBN hard turning. (Doctor of Philosophy), Georgia Institute of Technology, Atlanta, GA.
   Google Scholar
• Huang, Y.; Chou, Y.K.; Liang, S.Y. (2007) CBN tool wear in hard turning: A survey on research progresses. The International Journal of Advanced Manufacturing Technology, 35(5–6): 443–453. doi:10.1007/s00170-006-0737-6
   Web of Science ®Google Scholar
• Huang, Y.; Liang, S.Y. (2004) Modeling of CBN tool flank wear progression in finish hard turning. Journal of Manufacturing Science and Engineering, 126(1): 98–106. doi:10.1115/1.1644543
   Web of Science ®Google Scholar
• Karpat, Y.; Özel, T. (2006) Predictive analytical and thermal modeling of orthogonal cutting process—Part II: Effect of tool flank wear on tool forces, stresses, and temperature distributions. Journal of Manufacturing Science and Engineering, 128(2): 445–453. doi:10.1115/1.2162591
   Web of Science ®Google Scholar
• Li, C.P.; Kim, M.Y.; Ko, T.J.; Park, J.K. (2012) The effects of ultrasonic vibration on surface finish and tool wear in end-milling machining. Paper Presented at the 2012 International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), Shaanxi, China, 29 August–1 September. doi:10.1109/3M-NANO.2012.6472972
   Google Scholar
• Li, K.-M.; Wang, S.-L. (2014) Effect of tool wear in ultrasonic vibration-assisted micro-milling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(6): 847–855. doi:10.1177/0954405413510514
   Web of Science ®Google Scholar
• Lu, X.; Wang, H.; Jia, Z.; Feng, Y.; Liang, S.Y. (2019) Coupled thermal and mechanical analyses of micro-milling Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(4): 1112–1126. doi:10.1177/0954405418774586
   Web of Science ®Google Scholar
• Nath, C.; Rahman, M.; Andrew, S.S.K. (2007) A study on ultrasonic vibration cutting of low alloy steel. Journal of Materials Processing Technology, 192–193: 159–165. doi:10.1016/j.jmatprotec.2007.04.047
   Web of Science ®Google Scholar
• Ning, J.; Nguyen, V.; Huang, Y.; Hartwig, K.T.; Liang, S.Y. (2018) Inverse determination of Johnson–Cook model constants of ultra-fine-grained titanium based on chip formation model and iterative gradient search. The International Journal of Advanced Manufacturing Technology, 99(5–8): 1131–1140. doi:10.1007/s00170-018-2508-6
   Web of Science ®Google Scholar
• Ning, J.; Nguyen, V.; Liang, S.Y. (2018) Analytical modeling of machining forces of ultra-fine-grained titanium. The International Journal of Advanced Manufacturing Technology, 101(1–4): 627–636. doi:10.1007/s00170-018-2889-6
   Web of Science ®Google Scholar
• Nouari, M.; Calamaz, M.; Haddag, B.; Girot, F. (2013) Analysis of coating performances in machining titanium alloys for aerospace applications. International Journal of Machining and Machinability of Materials, 13(2/3): 158–173. doi:10.1504/IJMMM.2013.053220
   Google Scholar
• Oxley, P.L.B. (1989) Mechanics of Machining: An Analytical Approach to Assessing Machinability. Ellis Horwood Limited, Hemel Hempstead, Hertfordshire, England.
   Google Scholar
• Pan, Z.; Feng, Y.; Ji, X.; Liang, S.Y. (2017) Turning force prediction of AISI 4130 considering dynamic recrystallization. Proceedings of the ASME 2017 International Manufacturing Science and Engineering Conference, Los Angeles, CA, USA, 4–8 June. doi:10.1115/MSEC2017-3049
   Google Scholar
• Pan, Z.; Feng, Y.; Lu, Y.-T.; Lin, Y.-F.; Hung, T.-P.; Hsu, F.-C.; Liang, S.Y. (2017) Force modeling of Inconel 718 laser-assisted end milling under recrystallization effects. The International Journal of Advanced Manufacturing Technology, 92(5–8): 2965–2974. doi:10.1007/s00170-017-0379-x
   Web of Science ®Google Scholar
• Pan, Z.; Feng, Y.; Lu, Y.-T.; Lin, Y.-F.; Hung, T.-P.; Hsu, F.-C.; Lin, C.-F.; Lu, Y.-C.; Liang, S.Y. (2017) Microstructure-sensitive flow stress modeling for force prediction in laser assisted milling of Inconel 718. Manufacturing Review, 4: 6. doi:10.1051/mfreview/2017005
   Web of Science ®Google Scholar
• Sharma, V.; Pandey, P.M.; Dubey, S. (2016) Recent advances in ultrasonic assisted turning: A step towards sustainability. Cogent Engineering, 3(1): 1–20. doi:10.1080/23311916.2016.1222776
   Web of Science ®Google Scholar
• Tsai, M.; Chang, C.; Ho, J. (2016) The machining of hard mold steel by ultrasonic assisted end milling. Applied Sciences, 6(11): 373. doi:10.3390/app6110373
   Google Scholar
• Xu, W.-X.; Zhang, L.-C. (2015) Ultrasonic vibration-assisted machining: Principle, design and application. Advances in Manufacturing, 3(3): 173–192. doi:10.1007/s40436-015-0115-4
   Web of Science ®Google Scholar
• Yuan, H.L.; Ibrahim, M.R.; Rahim, Z.; Rahim, E.; Tobi, L.; Cheng, K.; Ding, H.; Agarwal, R.K.; Tandon, P.; Wang, E.X. (2017) An experimental investigation of cutting temperature and tool wear in 2 dimensional ultrasonic vibrations assisted micro-milling. MATEC Web of Conferences, 95: 07005. doi:10.1051/matecconf/20179507005
   Google Scholar