Investigation on performance characteristics of micro-EDM dressing for the fabrication of micro-rod(s) on Ti-6Al-7Nb biomedical material

References

• Banu, N.; Rani, D. (2018) Artificial neural network based optimization of prerequisite properties for the design of biocompatible titanium alloys. Computational Materials Science, 149: 259–266. doi:10.1016/j.commatsci.2018.03.039
   Web of Science ®Google Scholar
• Elias, C.N.; Fernandes, D.J.; Souza, F.M.; Monteiro, E.; Biasi, R.S. (2019) Mechanical and clinical properties of titanium and titanium-based alloys (Ti G2, Ti G4 cold worked nanostructured and Ti G5) for biomedical applications. Journal of Materials Research and Technology, 8(1): 1060–1069. doi:10.1016/j.jmrt.2018.07.016
   Google Scholar
• Fofonoff, T.; Martel, S.; Wiseman, C.; Dyer, R.; Hunter, I.; Hatsopoulos, N.; Donoghue, J. (2002) A highly flexible manufacturing technique for microelectrode array fabrication. Proc. 2nd Joint 24th Annual Conf. Annual Fall Meeting of the Biomedical Engineering Society [Engineering in Medicine and Biology], 3: 2107–2108. USA: IEEE. doi:10.1109/IEMBS.2002.1053191
   Google Scholar
• Hwang, Y.L.; Kuo, C.L.; Hwang, S.F. (2010) Fabrication of a micro-pin array with high density and high hardness by combining mechanical peck-drilling and reverse-EDM. Journal of Materials Processing Technology, 210(9): 1103–1130. doi:10.1016/j.jmatprotec.2010.02.022
   Web of Science ®Google Scholar
• Jahan, M.P.; Rahman, M.; Wong, Y.S. (2011) A review on the conventional and micro-electro discharge machining of tungsten carbide. International Journal of Machine Tools and Manufacture, 51(12): 837–858. doi:10.1016/j.ijmachtools.2011.08.016
   Web of Science ®Google Scholar
• Jahan, M.P.; Rahman, M.; Wong, Y.S.; Fuhua, L. (2010) On-machine fabrication of high-aspect-ratio micro-electrodes and application in vibration-assisted micro-electro discharge drilling of tungsten carbide. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(5): 795–814. doi:10.1243/09544054JEM1718
   Google Scholar
• Jahan, M.P.; Wong, Y.S.; Rahman, M.; Liang, T.W. (2012) In-situ machining of varied-shaped and arrays of microelectrodes using reverse micro-electrodischarge machining. International Journal of Mechatronics and Manufacturing Systems, 5(5/6): 495–515. doi:10.1504/IJMMS.2012.049975
   Google Scholar
• Kao, C.C.; Tao, J.; Shih, A.J. (2007) Near dry electrical discharge machining. International Journal of Machine Tools and Manufacture, 47(15): 2273–2281. doi:10.1016/j.ijmachtools.2007.06.001
   Web of Science ®Google Scholar
• Kim, B.H.; Park, B.J.; Chu, C.N. (2006) Fabrication of multiple electrodes by reverse EDM and their application in micro ECM. Journal of Micromechanics and Microengineering, 16(4): 843–850. doi:10.1088/0960-1317/16/4/022
   Web of Science ®Google Scholar
• Kumar, A.; Kumar, V.; Kumar, J. (2014) Microstructure analysis and material transformation of pure titanium and tool wear surface after wire electric discharge machining process. Machining Science and Technology, 18(1): 47–77. doi:10.1080/10910344.2014.863632
   Web of Science ®Google Scholar
• Lauro, C.H.; Filho, S.L.M.; Brandao, L.C.; Davim, J.P. (2016) Analysis of behaviour biocompatible titanium alloy (Ti-6Al-7Nb) in the micro-cutting. Measurement, 93: 529–540. doi:10.1016/j.measurement.2016.07.059
   Web of Science ®Google Scholar
• Lippmann, M.J. (2013) Low-cost, polymer microsystems for drug delivery and dosing. Journal of Chemical Information and Modeling, 53: 1689–1699 (PhD Dissertation, University of California, Berkeley).
   PubMedGoogle Scholar
• Malayath, G.; Sidpara, A.M.; Deb, S. (2020) Fabrication of micro-end mill tool by EDM and its performance evaluation. Machining Science and Technology Technology, 24(2): 126–169. doi:10.1080/10910344.2019.1636269
   Web of Science ®Google Scholar
• Mastud, S.; Singh, R.K.; Joshi, S.S. (2012) Analysis of fabrication of arrayed micro-rods on tungsten carbide using reverse micro-EDM. International Journal of Manufacturing Technology and Management, 26(1/2/3/4): 176–195. doi:10.1504/IJMTM.2012.051430
   Google Scholar
• Mujumdar, S.S.; Mastud, S.A.; Singh, R.K.; Joshi, S.S. (2010) Experimental characterization of the reverse micro-electrodischarge machining process for fabrication of high-aspect-ratio micro-rod arrays. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(5): 777–794. doi:10.1243/09544054JEM1745
   Web of Science ®Google Scholar
• Necas, D.N.; Klapetek, P. (2012) Gwyddion: an open-source software for SPM data analysis. Open Physics, 10(1): 181–188. doi:10.2478/s11534-011-0096-2
   Google Scholar
• Nirala, C.K.; Saha, P. (2016a) A new approach of tool wear monitoring and compensation in RµEDM process. Materials and Manufacturing Processes, 31(4): 483–494. doi:10.1080/10426914.2015.1058950
   Web of Science ®Google Scholar
• Nirala, C.K.; Saha, P. (2016b) Evaluation of μEDM-drilling and μEDM-dressing performances based on online monitoring of discharge gap conditions. The International Journal of Advanced Manufacturing Technology, 85(9–12): 1995–2012. doi:10.1007/s00170-015-7934-0
   Web of Science ®Google Scholar
• Plaza, S.; Sanchez, J.A.; Perez, E.; Gil, R.; Izquierdo, B.; Ortega, N.; Pombo, I. (2014) Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode. Precision Engineering, 38(4): 821–827. doi:10.1016/j.precisioneng.2014.04.010
   Web of Science ®Google Scholar
• Ramamurthy, A.; Sivaramakrishnan, R.; Muthuramalingam, T.; Venugopal, S. (2015) Performance analysis of wire electrodes on machining Ti-6Al-4V alloy using electrical discharge machining process. Machining Science and Technology, 19(4): 577–592. doi:10.1080/10910344.2015.1085314
   Web of Science ®Google Scholar
• Rees, A.; Dimov, S.S.; Ivanov, A.; Herrero, A.; Uriarte, L.G. (2006) Micro EDM: accuracy of on-the-machine dressed electrodes. Proc. 2nd Int. Conf. on Multi-Material Micro Manufacture (4M), 361–364. Elsevier. doi:10.1016/B978-008045263-0/50082-9
   Google Scholar
• Shah, M.S.; Saha, P. (2019) Investigation and evaluation of erosion efficiency in micro-EDM dressing of biocompatible Ti6Al7Nb material. Advances in Micro and Nano Manufacturing and Surface Engineering. Springer, Singapore, 309–317. doi:10.1007/978-981-32-9425-7_27
   Google Scholar
• Shao, B. (2015) Modeling and simulation of micro electrical discharge machining. Procedia CIRP, 2: 74–78 (PhD Dissertation, The Graduate College at University of Nebraska, Lincoln).
   Google Scholar
• Singh, A.K.; Patowari, P.K.; Deshpande, N.V. (2017) Effect of tool wear on microrods fabrication using reverse μEDM. Materials and Manufacturing Processes, 32(3): 286–293. doi:10.1080/10426914.2016.1198015
   Web of Science ®Google Scholar
• Yi, S.M.; Park, M.S.; Lee, Y.S.; Chu, C.N. (2008) Fabrication of a stainless steel shadow mask using batch mode micro-EDM. Microsystem Technologies, 14(3): 411–417. doi:10.1007/s00542-007-0468-0
   Web of Science ®Google Scholar
• Yu, Z.Y.; Rajurkar, K.P.; Shen, H. (2002) High aspect ratio and complex shaped blind micro holes by micro EDM. CIRP Annals, 51(1): 359–362. doi:10.1016/S0007-8506(07)61536-4
   Web of Science ®Google Scholar
• Zeng, W.; Wang, Z.; Dong, D. (2006) New micro-EDM reverse copying technology for microelectrode array fabrication. Int. Technology and Innovation Conf. 1633–1636. China: ITIC. doi:10.1049/cp:20061028
   Google Scholar