Cryogenic machining of elastomers: a review

References

• Akulichev, A.G.; Tiwari, A.; Dorogin, L.; Echtermeyer, A.T.; Persson, B.N.J. (2017) Rubber adhesion below the glass transition temperature: Role of frozen-in elastic deformation. EPL (Europhysics Letters) 120(3): 36002. doi:10.1209/0295-5075/120/36002
   Google Scholar
• Banerjee, S.S.; Bhowmick, A.K. (2015) Experimental study on the CO2 laser cutting of novel polyamide 6/fluoroelastomer thermoplastic elastomeric blends. Rubber Chemistry and Technology 88(1): 125–137. doi:10.5254/rct.14.85960
   Web of Science ®Google Scholar
• Bargel, F. (2000) Investigation of the machinability of an acrylonitrile-butadiene elastomer with the aim of producing rotationally symmetrical seals by turning, PhD thesis, Hamburg University of Technology.
   Google Scholar
• Baruffi, F.; Calaon, M.; Tosello, G. (2018) Effects of micro-injection molding process parameters on accuracy and precision of thermoplastic elastomer micro rings. Precision Engineering 51: 353–361. doi:10.1016/j.precisioneng.2017.09.006
   Web of Science ®Google Scholar
• Burfield, D.R.; Lim, K.L. (1983) Differential scanning calorimetry analysis of natural rubber and related polyisoprenes: Measurement of the glass transition temperature. Macromolecules 16(7): 1170–1175. doi:10.1021/ma00241a024
   Web of Science ®Google Scholar
• Callister, W.D. Jr. (2001) Fundamentals of Materials Science and Engineering: An Interactive E-Text (5th ed.), Wayne Anderson (Ed.). John Wiley & Sons, Inc., Von Hoffmann Press, New York.
   Google Scholar
• Carraher, C.E. (2003) Giant Molecules: Essential Material for Every Day Living & Problem Solving (2nd ed.), John Wiley and Sons, Inc., Hoboken, New Jersey.
   Google Scholar
• Chen, C.-C.A.; Pham, Q.-P.; Li, Y.-T.; Li, T.-H.; Hsueh, C.-T. 2018, Study on quasi-orthogonal machining of elastomer pad by single-point diamond tool. The International Journal of Advanced Manufacturing Technology 95(5-8): 2555–2565. doi:10.1007/s00170-017-1206-0
   Web of Science ®Google Scholar
• Das, A.; Poikelispää, M.; Shakun, A.; Vuorinen, J. (2015) New Elastomer Applications. Tampere University of Applied Sciences in Finland. Retrieved from https://www.tut.fi/ms/muo/kumi-instituutti/seminaarit/syksy2015/das.pdf. Last accessed 17 March 2019.
   Google Scholar
• Dhokia, V.G.; Newman, S.T.; Crabtree, P.; Ansell, M.P. (2010) A methodology for the determination of foamed polymer contraction rates as a result of cryogenic CNC machining. Robotics and Computer-Integrated Manufacturing 26(6): 665–670. doi:10.1016/j.rcim.2010.08.003
   Web of Science ®Google Scholar
• Dhokia, V.G.; Newman, S.T.; Crabtree, P.; Ansell, M.P. (2011a) A process control system for cryogenic CNC elastomer machining. Robotics and Computer-Integrated Manufacturing 27(4): 779–784. doi:10.1016/j.rcim.2011.02.006
   Web of Science ®Google Scholar
• Dhokia, V.G.; Newman, S.T.; Crabtree, P.; Ansell, M.P. (2011b) Adiabatic shear band formation as a result of cryogenic CNC machining of elastomers. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225(9): 1482–1492. doi:10.1177/0954405411415318
   Google Scholar
• Diego, S.; Casado, J.A.; Carrascal, I.; Ferreño, D.; Cardona, J.; Arcos, R. (2017) Numerical and experimental characterization of the mechanical behavior of a new recycled elastomer for vibration isolation in railway applications. Construction and Building Materials 134: 18–31. doi:10.1016/j.conbuildmat.2016.12.115
   Web of Science ®Google Scholar
• DIN 7724 (1993) Polymeric materials – Grouping of polymeric materials based on their mechanical behavior, German Institute for Standardization (in German) 1–6.
   Google Scholar
• Duffy, D.C.; McDonald, J.C.; Schueller, O.J.A.; Whitesides, G.M. (1998) Rapid prototyping of microfluidic systems in poly(dimethylsiloxane). Analytical Chemistry 70(23): 4974–4984. doi:10.1021/ac980656z
   PubMed Web of Science ®Google Scholar
• Getu, H.; Spelt, J.K.; Papini, M. (2008) Cryogenically assisted abrasive jet micromachining of polymers. Journal of Micromechanics and Microengineering 18(11): 115010. doi:10.1088/0960-1317/18/11/115010
   Web of Science ®Google Scholar
• Getu, H.; Spelt, J.K.; Papini, M. (2011) Thermal analysis of cryogenically assisted abrasive jet micromachining of PDMS. International Journal of Machine Tools and Manufacture 51(9): 721–730. doi:10.1016/j.ijmachtools.2011.05.003
   Web of Science ®Google Scholar
• Gradeen, A.G.; Spelt, J.K.; Papini, M. 2012, Cryogenic abrasive jet machining of polydimethylsiloxane at different temperatures. Wear 274-275: 335–344. doi:10.1016/j.wear.2011.09.013
   Web of Science ®Google Scholar
• Haberstroh, E.; Linhart, C. (2004) Batch variations and their effects on the elastomer-processing illustrated on the model of the injection molding process. Journal of Polymer Engineering 24(1–3): 325–341. doi:10.1515/POLYENG.2004.24.1-3.325
   Web of Science ®Google Scholar
• Havranek, A. (1982) Mobility of rubber chains near above the glass transition temperature. Polymer Bulletin 8(2-4): 133–139.
   Web of Science ®Google Scholar
• Hosokawa, K.; Maeda, R. (2000) A pneumatically-actuated three-way microvalve fabricated with polydimethylsiloxane using the membrane transfer technique. Journal of Micromechanics and Microengineering 10(3): 415–420. doi:10.1088/0960-1317/10/3/317
   Web of Science ®Google Scholar
• Hu, Y.; Kang, Y.; Wang, X.-C.; Li, X.-H.; Long, X.-P.; Zhai, G.-Y.; Huang, M. (2014) Mechanism and experimental investigation of ultra-high-pressure water jet on rubber cutting. International Journal of Precision Engineering and Manufacturing 15(9): 1973–1978. doi:10.1007/s12541-014-0553-0
   Web of Science ®Google Scholar
• Jin, M.; Murakawa, M. (1998) High-speed milling of rubber (1st report): Fundamental experiments and considerations for improvement of work accuracy. Journal of the Japan Society for Precision Engineering 64(6): 897–901. doi:10.2493/jjspe.64.897
   Google Scholar
• Johnston, I.D.; Tracey, M.C.; Davis, J.B.; Tan, C.K.L. (2005) Micro throttle pump employing displacement amplification in an elastomeric substrate. Journal of Micromechanics and Microengineering 15(10): 1831–1839. doi:10.1088/0960-1317/15/10/007
   Web of Science ®Google Scholar
• Kakinuma, Y.; Kidani, S.; Aoyama, T. (2012) Ultra-precision cryogenic machining of viscoelastic polymers. CIRP Annals - Annals 61(1): 79–82. doi:10.1016/j.cirp.2012.03.039
   Web of Science ®Google Scholar
• Kakinuma, Y.; Yasuda, N.; Aoyama, T. (2008) Micromachining of soft polymer material applying cryogenic cooling. Journal of Advanced Mechanical Design, Systems, and Manufacturing2(4): 560–569. doi:10.1299/jamdsm.2.560
   Web of Science ®Google Scholar
• Lewis, M.A. (2002) End milling of elastomers, Master thesis, North Carolina State University.
   Google Scholar
• Loadman, M.J.R. (1985) The glass transition temperature of natural rubber. Journal of Thermal Analysis 30(4): 929–941. doi:10.1007/BF01913321
   Web of Science ®Google Scholar
• Luo, J.; Ding, H.; Shih, A. (2005a) Induction-heated tool machining of elastomers: Part 2: Chip morphology, cutting forces, and machined surfaces. Machining Science and Technology 9(4): 567–588. doi:10.1080/10910340500398233
   Web of Science ®Google Scholar
• Luo, J.; Ding, H.; Shih, A. (2005b) Induction-heated tool machining of elastomers: Part 1: Finite difference thermal modeling and experimental validation. Machining Science and Technology 9(4): 547–565. doi:10.1080/10910340500398225
   Web of Science ®Google Scholar
• Maitz, M.F. (2015) Applications of synthetic polymers in clinical medicine. Biosurface and Biotribology 1(3): 161–176. doi:10.1016/j.bsbt.2015.08.002
   Google Scholar
• McKeen, L.W. (2013) The Effect of UV Light and Weather on Plastics and Elastomers (3rd ed.), norwich (Ed.), William Andrew, New York, USA.
   Google Scholar
• McMillin, C.R. (1994) Elastomers for biomedical applications. Rubber Chemistry and Technology 67(3): 417–446. doi:10.5254/1.3538684
   Web of Science ®Google Scholar
• Mishima, K.; Kakinuma, Y.; Aoyama, T. (2010) Pre-deformation-assisted cryogenic micromachining for fabrication of three-dimensional unique micro channels. Journal of Advanced Mechanical Design, Systems, and Manufacturing4(5): 936–947. doi:10.1299/jamdsm.4.936
   Web of Science ®Google Scholar
• Moreno, A.; Rivera; Hernández-Castillo, L.E.; Siller, H.; R; Elías-Zúñiga, A.; Rodríguez-González, C.A. (2013) Influence of CO2 cooling on the orthogonal cutting of elastomers. Mechanical Engineering Technology and Development 4(5): 177–183.
   Google Scholar
• Nayak, R.; Nayak, A.; Shetty, R. (2018) Low temperature machining of nitrile rubber. International Journal of Automotive and Mechanical Engineering 15(3): 5500–5510.
   Web of Science ®Google Scholar
• Nayak, R.; Shetty, R.; Nayak, M. (2015) Influence of liquid nitrogen cooling on the end milling of elastomers. Proceedings of International Conference on Mechanical Engineering and Industrial Automation, Dubai, November 2015, 40–45.
   Google Scholar
• Nayak, R.; Shetty, R.; Shetty, S. (2012) Experimental and finite element analysis on chip formation mechanism in machining of elastomers. Bonfring International Journal of Industrial Engineering and Management Science 2(2): 10–13. doi:10.9756/BIJIEMS.1291
   Google Scholar
• Payne, A.R. (1962) The dynamic properties of carbon black loaded natural rubber vulcanizates. Part I. Journal of Applied Polymer Science 6(19): 57–63. doi:10.1002/app.1962.070061906
   Google Scholar
• Putz, M.; Dix, M.; Neubert, M.; Schmidt, T. (2016a) Mechanism of cutting elastomers with cryogenic cooling. CIRP Annals - Annals 65(1): 73–76. doi:10.1016/j.cirp.2016.04.075
   Web of Science ®Google Scholar
• Putz, M.; Dix, M.; Neubert, M.; Schmidt, G.; Wertheim, R. (2016b) Investigation of turning elastomers assisted with cryogenic cooling. Procedia CIRP 40: 631–636. doi:10.1016/j.procir.2016.01.146
   Google Scholar
• Rodkwan, S.; Strenkowski, J.S. (2003) A numerical and experimental investigation of the machinability of elastomers. 17th National Conference on Mechanical Engineering – Network National Conference, Prajinburi, Thailand Mechanical Engineering Network, October 2003, 1–9.
   Google Scholar
• Rudin, A. (1999) The Elements of Polymer Science and Engineering (2nd ed.), Academic Press, an Imprint of Elsevier, San Diego, USA.
   Google Scholar
• Sare, I.R.; Mardel, J.I.; Hill, A.J. (2001) Wear-resistant metallic and elastomeric materials in the mining and mineral processing industries: An overview. Wear 250(1-12): 1–10. doi:10.1016/S0043-1648(01)00622-6
   Google Scholar
• Shih, A.J.; Lewis, M.A.; Strenkowski, J.S. (2004a) End milling of elastomers: Fixture design and tool effectiveness for material removal. Journal of Manufacturing Science and Engineering 126(1): 115–123. doi:10.1115/1.1616951
   Web of Science ®Google Scholar
• Shih, A.J.; Luo, J.; Lewis, M.A.; Strenkowski, J.S. (2004b) Chip morphology and forces in end milling of elastomers. Journal of Manufacturing Science and Engineering 126(1): 124–130. doi:10.1115/1.1633276
   Web of Science ®Google Scholar
• Shokrani, A.; Dhokia, V.; Muñoz-Escalona, P.; Newman, S.T. (2013) State-of-the-art cryogenic machining and processing. International Journal of Computer Integrated Manufacturing 26(7): 616–648. doi:10.1080/0951192X.2012.749531
   Web of Science ®Google Scholar
• Shokrani, A.; Dhokia, V.; Newman, S.T. (2012) Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids. International Journal of Machine Tools and Manufacture 57: 83–101. doi:10.1016/j.ijmachtools.2012.02.002
   Web of Science ®Google Scholar
• Sperling, L.H. (1982) Molecular motion in polymers: mechanical behavior of polymers near the glass-rubber transition temperature. Journal of Chemical Education 59(11): 942–943. doi:10.1021/ed059p942
   Web of Science ®Google Scholar
• Teramoto, K.; Kunishima, T.; Matsumoto, H, Muroran Institute of Technology 27-1 Mizumoto, Muroran, Hokkaido 050-8585, Japan (2017) Analysis of cutting force in elastomer end-milling. International Journal of Automation Technology 11(6): 958–963. doi:10.20965/ijat.2017.p0958
   Google Scholar
• Unger, M.A.; Chou, H.P.; Thorsen, T.; Scherer, A.; Quake, S.R. (2000) Monolithic microfabricated valves and pumps by multilayer soft lithography. Science (New York, N.Y.) 288(5463): 113–116. doi:10.1126/science.288.5463.113
   PubMed Web of Science ®Google Scholar
• Vijayaram, T.R. (2009) A technical review on rubber. International Journal on Design and Manufacturing Technologies 3(1): 25–37.
   Google Scholar
• Vyazovkin, S. (2018) Handbook of thermal analysis and calorimetry: Recent advances, Techniques, and Applications (2nd ed.), S. Vyazovkin, N. Koga, and C. Schick (Eds.). Elsevier, Amsterdam, Netherlands.
   Google Scholar
• Wu, X.; Kim, S.-H.; Ji, C.-H.; Allen, M.G. (2011) A solid hydraulically amplified piezoelectric microvalve. Journal of Micromechanics and Microengineering 21(9): 095003. doi:10.1088/0960-1317/21/9/095003
   Web of Science ®Google Scholar
• Yan, J.; Strenkowski, J.S. (2006) A finite element analysis of orthogonal rubber cutting. Journal of Materials Processing Technology 174(1–3): 102–108. doi:10.1016/j.jmatprotec.2005.02.265
   Web of Science ®Google Scholar
• Yong, A.X.H.; Sims, G.D.; Gnaniah, S.J.P.; Ogin, S.L.; Smith, P.A. (2017) Heating rate effects on thermal analysis measurement of Tg in composite materials. Advanced Manufacturing: Polymer & Composites Science 3(2): 43–51.
   Web of Science ®Google Scholar
• Zohuri, B. (2017) Hybrid Energy Systems: Driving Reliable Renewable Sources of Energy Storage (1st ed.). Springer, Cham, Switzerland.
   Google Scholar