References
- Agic, A.; Eynian, M.; Ståhl, J.-E.; Beno, T. (2018) Experimental analysis of cutting edge effects on vibrations in end milling. Cirp Journal of Manufacturing Science and Technology 24: 66–74. doi:https://doi.org/10.1016/j.cirpj.2018.11.001
- Anthony, X.M.; Ajith, K.J.P. (2017) Machinability of hybrid metal matrix composite – a review. Procedia Engineering 174: 1110–1118. doi:https://doi.org/10.1016/j.proeng.2017.01.264
- Domingo, R.; de Agustina, B.; Marín, M.M. (2019) An analysis of the forces in the cryogenic peripheral milling of composites reinforced with carbon fiber. Procedia Manufacturing 41: 423–429. doi:https://doi.org/10.1016/j.promfg.2019.09.028
- Du, J.G.; Ming, W.Y.; Cao, Y.; Ma, J.; He, W.B.; Li, X.K. (2019) Particle removal mechanism of high volume fraction SiCp/Al composites by single diamond grit tool. Journal of Wuhan University of Technology-Mater. Sci. Ed. 34(2): 324–331. doi:https://doi.org/10.1007/s11595-019-2055-5
- Hong, S.Y.; Markus, I.; Jeong, W. (2001) New cooling approach and tool life improvement in cryogenic machining of Titanium Alloy Ti-6Al-4V. International Journal of Machine Tools and Manufacture 41(15): 2245–2260. doi:https://doi.org/10.1016/S0890-6955(01)00041-4
- Hong, S.Y. (2006) Lubrication mechanisms of LN2 in ecological cryogenic machining. Machining Science and Technology 10(1): 133–155. doi:https://doi.org/10.1080/10910340500534324
- Huang, S.T.; Yu, X.L. (2018) A study of grinding forces of SiCp/Al composites. The International Journal of Advanced Manufacturing Technology 94(9–12): 3633–3639. doi:https://doi.org/10.1007/s00170-017-1115-2
- Jebaraj, M.; Pradeep Kumar, M. (2019) Effect of cryogenic CO2 and LN2 coolants in milling of aluminum alloy. Materials and Manufacturing Processes 34(5): 511–520. doi:https://doi.org/10.1080/10426914.2018.1532591
- Khanna, N.; Suri, N.M.; Agrawal, C.; Shah, P.; Krolczyk, G.M. (2019) Effect of hybrid machining techniques on machining performance of in-house developed Mg-PMMC. Transactions of the Indian Institute of Metals72(7): 1799–1807. doi:https://doi.org/10.1007/s12666-019-01652-w
- Khanna, N.; Shah, P.; Suri, N.M.; Agrawal, C.; Khatkar, S.K.; Pusavec, F.; Sarikaya, M. (2021) Application of environmentally-friendly cooling/lubrication strategies for turning magnesium. Silicon 13(8): 2445–2459. doi:https://doi.org/10.1007/s12633-020-00588-x
- Khanna, N.; Suri, N.M.; Shah, P.; Hegab, H.; Mia, M. (2020) Cryogenic turning of in-house cast magnesium based MMCs: a comprehensive investigation. Journal of Materials Research and Technology 9(4): 7628–7643. doi:https://doi.org/10.1016/j.jmrt.2020.05.023
- Laghari, R.A.; Li, J.G.; Mia, M. (2020) Effects of turning parameters and parametric optimization of the cutting forces in machining SiCp/Al 45 wt% composite. Metals 10(6): 840. doi:https://doi.org/10.3390/met10060840
- Li, N. (2012) Aluminum alloy material and its heat treatment technology. Beijing: Metallurgical Industry 170 (in Chinese)
- Liu, J.J.; Chen, C.; Yang, Y.F.; Li, L.; Zhao, W. (2016) Experimental research of milling force and cutting temperature of TB2 titanium alloy in liquid nitrogen cooling. Materials Science Forum 836-837: 36–42. doi:https://doi.org/10.4028/www.scientific.net/MSF.836-837.36
- Liu, Q.Y.; Wang, F.; Wu, W.W.; An, D.; He, Z.Y.; Xue, Y.P.; Zhang, Q.F.; Xie, Z.P. (2019) Enhanced mechanical properties of SiC/Al composites at cryogenic temperatures. Ceramics International45(3): 4099–4102. doi:https://doi.org/10.1016/j.ceramint.2018.10.233
- Malekian, M.; Mostofa, M.G.; Park, S.S.; Jun, M.B.G. (2012) Modeling of minimum uncut chip thickness in micro machining of aluminum. Journal of Materials Processing Technology 212(3): 553–559. doi:https://doi.org/10.1016/j.jmatprotec.2011.05.022
- Niu, Q.L.; Jing, L.; Wang, C.H.; Li, S.J.; Qiu, X.Y.; Li, C.P.; Xiang, D.H. (2020) Study on effect of vibration amplitude on cutting performance of SiCp/Al composites during ultrasonic vibration–assisted milling. The International Journal of Advanced Manufacturing Technology 106(5-6): 2219–2225. doi:https://doi.org/10.1007/s00170-019-04796-7
- Niu, Q.L.; Tang, L.Y.; Liu, X.P.; Li, P.N.; Qiu, X.Y. (2017) Influence of cutting parameters on edge morphology of SiCp/Al matrix composites in milling. Aerospace Materials & Technology 47(5): 35–39. in Chinese). doi:https://doi.org/10.12044/j.issn.1007-2330.2017.05.008
- Park, K.H.; Suhaimi, M.A.; Yang, G.D.; Lee, D.Y.; Lee, S.W.; Kwon, P. (2017) Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL). International Journal of Precision Engineering and Manufacturing 18(1): 5–14. doi:https://doi.org/10.1007/s12541-017-0001-z
- Ravi, S.; Kumar, M.P. (2012) Experimental investigation of cryogenic cooling in milling of AISI D3 tool steel. Materials and Manufacturing Processes 27(10): 1017–1021. doi:https://doi.org/10.1080/10426914.2011.654157
- Santos, M.C.; Machado, A.R.; Sales, W.F.; Barrozo, M.A.S.; Ezugwu, E.O. (2016) Machining of aluminum alloys: a review. The International Journal of Advanced Manufacturing Technology 86(9–12): 3067–3080. doi:https://doi.org/10.1007/s00170-016-8431-9
- Shen, N.G.; Ding, H.T.; Pu, Z.W.; Jawahir, I.S.; Jia, T. (2017) enhanced surface integrity from cryogenic machining of AZ31B Mg alloy: a physics-based analysis with microstructure prediction. Journal of Manufacturing Science and Engineering 139(6): 061012. https://doi.org/10.1115/1.4034279
- Suresh Kumar Reddy, N.; Kwang-Sup, S.; Yang, M.Y. (2008) Experimental study of surface integrity during end milling of Al/SiC particulate metal–matrix composites. Journal of Materials Processing Technology 201(1–3): 574–579. doi:https://doi.org/10.1016/j.jmatprotec.2007.11.280
- Shokrani, A.; Al-Samarrai, I.; Newman, S.T. (2019) Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy. Journal of Manufacturing Processes 43: 229–243. doi:https://doi.org/10.1016/j.jmapro.2019.05.006
- Sivaiah, P.; Chakradhar, D. (2018) Effect of cryogenic coolant on turning performance characteristics during machining of 17-4 PH stainless steel: a comparison with MQL, wet, dry machining. CIRP Journal of Manufacturing Science and Technology 21: 86–96. doi:https://doi.org/10.1016/j.cirpj.2018.02.004
- Sivaiah, P.; Chakradhar, D. (2019) Performance improvement of cryogenic turning process during machining of 17-4 PH stainless steel using multi objective optimization techniques. Measurement 136: 326–336. doi:https://doi.org/10.1016/j.measurement.2018.12.094
- Sun, Y.; Huang, B.; Puleo, D.A.; Jawahir, I.S. (2015) Enhanced machinability of Ti-5553 alloy from cryogenic machining: comparison with MQL and flood-cooled machining and modeling. Procedia CIRP 31: 477–482. doi:https://doi.org/10.1016/j.procir.2015.03.099
- Tang, D.W.; Zhang, W.M.; Zhao, R.L.; Lv, X.J. (2017) Machining of SiCp/Al composites: effect of tool corner radius on residual stresses, cutting force and temperature. Advanced Materials Research 1142: 265–270. doi:https://doi.org/10.4028/www.scientific.net/amr.1142.265
- Wang, F.B.; Liu, J.K.; Shu, Q.L. (2017) Optimization of cryogenic milling parameters for AFRP. The International Journal of Advanced Manufacturing Technology 91(9–12): 3243–3252. doi:https://doi.org/10.1007/s00170-017-0003-0
- Wang, F.B.; Wang, Y.Q. (2020) Mechanical properties of helical milling deep hole on QFRP using cryogenic cooling process. Machining Science and Technology 25(1): 71–29. doi:https://doi.org/10.1080/10910344.2020.1815045
- Wang, T.; Xie, L.J.; Wang, X.B.; Shang, T.Y. (2015) 2D and 3D Milled surface roughness of high volume fraction. Defence Technology 11(2): 104–109. doi:https://doi.org/10.1016/j.dt.2015.01.001
- Zhou, L.; Huang, S.T.; Yu, X.L. (2014) Machining characteristics in cryogenic grinding of SiCp/Al composites. Acta Metallurgica Sinica (English Letters) 27(5): 869–874. doi:https://doi.org/10.1007/s40195-014-0126-3
- Zhu, C.M.; Gu, P.; Liu, D.H.; Hu, X.; Wu, Y.Y. (2019) Evaluation of surface topography of SiCp/Al composite in grinding. The International Journal of Advanced Manufacturing Technology102(9–12): 2807–2821. doi:https://doi.org/10.1007/s00170-019-03362-5