References
- Abrão, A.M.; Faria, P.E.; Rubio, J.C.C.; Reis, P.; Davim, J.P. (2007) Drilling of fiber reinforced plastics: A review. Journal of Materials Processing Technology, 186(1–3): 1–7. doi:https://doi.org/10.1016/j.jmatprotec.2006.11.146
- An, Q.; Cai, C.; Cai, X.; Chen, M. (2019) Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates. Composite Structures, 230: 111441. doi:https://doi.org/10.1016/j.compstruct.2019.111441
- An, Q.; Chen, J.; Ming, W.; Chen, M. (2021) Machining of SiC ceramic matrix composites: A review. Chinese Journal of Aeronautics, 34(4): 540–567. doi:https://doi.org/10.1016/j.cja.2020.08.001
- An, Q.; Dang, J.; Li, J.; Wang, C.; Chen, M. (2020) Investigation on the cutting responses of CFRP/Ti stacks: With special emphasis on the effects of drilling sequences. Composite Structures, 253(May): 112794. doi:https://doi.org/10.1016/j.compstruct.2020.112794
- An, Q.; Ming, W.; Cai, X.; Chen, M. (2015) Effects of tool parameters on cutting force in orthogonal machining of T700/LT03A unidirectional carbon fiber reinforced polymer laminates. Journal of Reinforced Plastics and Composites, 34(7): 591–602. doi:https://doi.org/10.1177/0731684415577688
- Arola, D.; Ramulu, M. (1997) Orthogonal cutting of fiber-reinforced composites: A finite element analysis. International Journal of Mechanical Sciences, 39(5): 597–613. doi:https://doi.org/10.1016/S0020-7403(96)00061-6
- Arola, D.; Ramulu, M.; Wang, D.H. (1996) Chip formation in orthogonal trimming of graphite/epoxy composite. Composites Part A: Applied Science and Manufacturing, 27(2): 121–133. doi:https://doi.org/10.1016/1359-835X(95)00013-R
- Azmi, A.I.; Lin, R.J.T.; Bhattacharyya, D. (2012) Experimental study of machinability of GFRP composites by end milling. Materials and Manufacturing Processes, 27(10): 1045–1050. doi:https://doi.org/10.1080/10426914.2012.677917
- Cai, X.; Zhou, R.; Shen, L.; Tang, H.; An, Q. (2019) An experimental investigation on precision machining mechanism of carbon fibre reinforced polymer. International Journal of Abrasive Technology, 9(1): 16–30. doi:https://doi.org/10.1504/IJAT.2019.097965
- Calzada, K.A.; Kapoor, S.G.; Devor, R.E.; Samuel, J.; Srivastava, A.K. (2012) Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites. Journal of Manufacturing Processes, 14(2): 141–149. doi:https://doi.org/10.1016/j.jmapro.2011.09.005
- Can, A. (2019) Study on the machinability of SMC composites during hole milling: Influence of tool geometry and machining parameters. Arabian Journal for Science and Engineering, 44(9): 7599–7616. doi:https://doi.org/10.1007/s13369-019-03865-z
- Chatelain, J.F.; Zaghbani, I. (2012) A comparison of special helical cutter geometries based on cutting forces for the trimming of CFRP laminates. International Journal of Mechanics, 6(1): 52–59.
- Davim, J.P.; Reis, P. (2005) Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments. Journal of Materials Processing Technology, 160(2): 160–167. doi:https://doi.org/10.1016/j.jmatprotec.2004.06.003
- Giasin, K.; Gorey, G.; Byrne, C.; Sinke, J.; Brousseau, E. (2019) Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates. Composite Structures, 212(15): 159–174. doi:https://doi.org/10.1016/j.compstruct.2019.01.023
- Iliescu, D.; Gehin, D.; Iordanoff, I.; Girot, F.; Gutiérrez, M.E. (2010) A discrete element method for the simulation of CFRP cutting. Composites Science and Technology, 70(1): 73–80. doi:https://doi.org/10.1016/j.compscitech.2009.09.007
- Jahromi, A.S.; Bahr, B.; Krishnan, K. (2014) An analytical method for predicting damage zone in orthogonal machining of unidirectional composites. Journal of Composite Materials, 48(27): 3355–3365. doi:https://doi.org/10.1177/0021998313509862
- Langari, J.; Kolahan, F.; Aliakbari, K. (2016) Effect of tool speed on axial force, mechanical properties and weld morphology of friction stir welded joints of A7075-T651. International Journal of Engineering, 29(3): 403–410. doi:https://doi.org/10.5829/idosi.ije.2016.29.03c.15
- Latha, B.; Senthilkumar, V.S.; Palanikumar, K. (2011) Modeling and optimization of process parameters for delamination in drilling glass fiber reinforced plastic (GFRP) composites. Machining Science and Technology, 15(2): 172–191. doi:https://doi.org/10.1080/10910344.2011.579802
- Lopresto, V.; Caggiano, A.; Teti, R. (2016) High performance cutting of fibre reinforced plastic composite materials. Procedia CIRP, 46: 71–82. doi:https://doi.org/10.1016/j.procir.2016.05.079
- Ming, I.W.M.; Azmi, A.I.; Chuan, L.C.; Mansor, A.F. (2018) Experimental study and empirical analyses of abrasive waterjet machining for hybrid carbon/glass fiber-reinforced composites for improved surface quality. The International Journal of Advanced Manufacturing Technology, 95(9–12): 3809–3822. doi:https://doi.org/10.1007/s00170-017-1465-9
- Palanikumar, K. (2007) Modeling and analysis for surface roughness in machining glass fibre reinforced plastics using response surface methodology. Materials & Design, 28(10): 2611–2618. doi:https://doi.org/10.1016/j.matdes.2006.10.001
- Prasanth, I.S.N.V.R.; Ravishankar, D.V.; Hussain, M.M. (2017a) Comparative evaluation on milled surface quality of GFRP composites by different end mill tools. International Journal of Machining and Machinability of Materials, 19(5): 483–504. doi:https://doi.org/10.1504/IJMMM.2017.087622
- Prasanth, I.S.N.V.R.; Ravishankar, D.V.; Hussain, M.M.; Badiganti, C.M.; Sharma, V.K.; Pathak, S. (2018) Investigations on performance characteristics of GFRP composites in milling. The International Journal of Advanced Manufacturing Technology, 99(5–8): 1351–1360. doi:https://doi.org/10.1007/s00170-018-2544-2
- Prasanth, I.S.N.V.R.; Ravishankar, D.V.; Hussain, M.M. (2017b) Analysis of milling process parameters and their influence on glass fiber reinforced polymer composites. IJE TRANSACTIONS A: Basics, 30(7): 1074–1080. https://doi.org/10.5829/ije.2017.30.07a.17
- Prashanth, I.S.N.V.R.; Ravi Shankar, D.V.; Manzoor Hussain, M.; Chandra Mouli, B. (2018) Critical analysis in milling of GFRP composites by various end mill tools. Materials Today: Proceedings, 5(6): 14607–14617. doi:https://doi.org/10.1016/j.matpr.2018.03.052
- Ramulu, M. (1997) Machining and surface integrity of fibre-reinforced plastic composites. Sadhana, 22(3): 449–472. doi:https://doi.org/10.1007/BF02744483
- Shojaeefard, M.H.; Khalkhali, A.; Shahbaz, S.O. (2019) Low-carbon steel sheet asymmetric single-point incremental forming: Analysis and optimization of the surface roughness. International Journal of Engineering, Transactions C: Aspects, 32(6): 866–871. https://doi.org/10.5829/ije.2019.32.06c.10
- Slamani, M.; Chatelain, J.F.; Hamedanianpour, H. (2019) Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers. International Journal of Material Forming, 12(3): 331–353. doi:https://doi.org/10.1007/s12289-018-1419-2
- Slamani, M.; Gauthier, S.; Chatelain, J.F. (2015) A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs. Measurement, 59: 268–283. doi:https://doi.org/10.1016/j.measurement.2014.09.052
- Srinivasan, T.; Palanikumar, K.; Rajagopal, K.; Latha, B. (2017) Optimization of delamination factor in drilling GFR-polypropylene composites. Materials and Manufacturing Processes, 32(2): 226–233. doi:https://doi.org/10.1080/10426914.2016.1151038
- Wang, D.H.; Ramulu, M.; Arola, D. (1995) Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: Unidirectional laminate. International Journal of Machine Tools and Manufacture, 35(12): 1623–1638. doi:https://doi.org/10.1016/0890-6955(95)00014-O
- Zhang, L.C.; Zhang, H.J.; Wang, X.M. (2001) A force prediction model for cutting unidirectional fibre-reinforced plastics. Machining Science and Technology, 5(3): 293–305. doi:https://doi.org/10.1081/MST-100108616