Experimental comparison of the indexable drilling with different U drills on hole quality

References

• Aamir, M.; Tolouei-Rad, M.; Giasin, K.; Vafadar, A.; Koklu, U.; Keeble, W. (2021). Evaluation of the surface defects and dimensional tolerances in multi-hole drilling of AA5083, AA6061, and AA2024. Applied Sciences, 11(9): 4285. doi:10.3390/app11094285.
   Google Scholar
• Abele, E.; Ellermeier, A.; Hohenstein, J.; Tschannerl, M. (2007) Tool length influence on wear behaviour of twisted carbide drills. Production Engineering, 1(1): 51–56. doi:10.1007/s11740-007-0029-5.
   Google Scholar
• Abele, E.; Schäfer, D. (2013) A new approach for a simulation-based prediction of torsional chatter in deep hole drilling with extra-long twist drills. International Manufacturing Science and Engineering Conference, American Society of Mechanical Engineers. doi:10.1115/MSEC2013-1184.
   Google Scholar
• Ahmadi, K.; Altintas, Y. (2013) Stability of lateral, torsional and axial vibrations in drilling. International Journal of Machine Tools and Manufacture, 68: 63–74. doi:10.1016/j.ijmachtools.2013.01.006.
   Web of Science ®Google Scholar
• Ahmed, L.S.; Kumar, M.P. (2016) Cryogenic drilling of Ti–6Al–4V alloy under liquid nitrogen cooling. Materials and Manufacturing Processes, 31(7): 951–959. doi:10.1080/10426914.2015.1048475.
   Web of Science ®Google Scholar
• Akdulum, A.; Kayir, Y. (2023a) Experimental investigation and optimization of process stability in drilling of Al 7075-T651 using indexable insert drills. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(8): 429. doi:10.1007/s40430-023-04303-w.
   Web of Science ®Google Scholar
• Akdulum, A.; Kayir, Y. (2023b) Investigation of the effect of u drills with different properties on thrust force, torque and spindle load. Politeknik Dergisi, 26(1): 387–400. doi:10.2339/politeknik.1113301.
   Google Scholar
• Akdulum, A.; Kayir, Y. (2023c) Modeling and estimation of thrust force, torque, and surface roughness in indexable drilling of AA6061-T651 with Taguchi, ANN, and ANFIS. Sādhanā, 48(3): 143. doi:10.1007/s12046-023-02209-w.
   Web of Science ®Google Scholar
• Al-Tameemi, H.A.; Al-Dulaimi, T.; Awe, M.O.; Sharma, S.; Pimenov, D.Y.; Koklu, U.; Giasin, K. (2021) Evaluation of cutting-tool coating on the surface roughness and hole dimensional tolerances during drilling of Al6061-T651 alloy. Materials (Basel, Switzerland), 14(7): 1783. doi:10.3390/ma14071783.
   PubMed Web of Science ®Google Scholar
• Arvajeh, T.; Ismail, F. (2006) Machining stability in high-speed drilling—Part 1: Modeling vibration stability in bending. International Journal of Machine Tools and Manufacture, 46(12-13): 1563–1572. doi:10.1016/j.ijmachtools.2005.09.018.
   Web of Science ®Google Scholar
• Astakhov, V.P. (2014) Drills: Science and Technology of Advanced Operations. CRC Press.
   Google Scholar
• Aydin, B.; Ozcatalbas, Y. (2003) AA2014 (T6) Alaşımının İşlenebilirlik Özelliklerine Kesici Takım Geometrisinin Etkisi. Makina Tasarım ve İmalat Dergisi, 5(2): 89–95.
   Google Scholar
• Bahçe, E.; Özdemir, B. (2019) Determination of tool deflection in drilling by image processing. IET Image Processing, 13(13): 2487–2494. doi:10.1049/iet-ipr.2019.0267.
   Web of Science ®Google Scholar
• Bayraktar, Ş; Çamkerten, Ç. (2020) Al-25Zn-3Cu-3Si Alaşımının İşlenmesinde Kaplamasız ve CVD-TiCN Kaplamalı Kesici Uçların Kesme Performansının Karşılaştırılması. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, 12(2): 618–623. doi:10.29137/umagd.705125.
   Google Scholar
• Biermann, D.; Hartmann, H. (2012) Reduction of burr formation in drilling using cryogenic process cooling. Procedia CIRP, 3: 85–90. doi:10.1016/j.procir.2012.07.016.
   Google Scholar
• ASM International Handbook Committee. (1992) Properties and selection: nonferrous alloys and special-purpose materials. ASM international, 2: 1143–1144. doi:10.31399/asm.hb.v02.9781627081627.
   Google Scholar
• Ema, S.; Marui, E. (2003) Theoretical analysis on chatter vibration in drilling and its suppression. Journal of Materials Processing Technology, 138(1–3): 572–578. doi:10.1016/S0924-0136(03)00148-1.
   Web of Science ®Google Scholar
• Giasin, K.; Hodzic, A.; Phadnis, V.; Ayvar-Soberanis, S. (2016) Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study. The International Journal of Advanced Manufacturing Technology, 87(5-8): 2041–2061. doi:10.1007/s00170-016-8563-y.
   Web of Science ®Google Scholar
• Guba, N.; Schumski, L.; Paulsen, T.; Karpuschewski, B. (2022) Vibration-assisted deep hole drilling of the aluminum material AlMgSi0. 5. CIRP Journal of Manufacturing Science and Technology, 36: 57–66. doi:10.1016/j.cirpj.2021.11.002.
   Web of Science ®Google Scholar
• Harshith, N.; Devendra, Y.; Jagadesh, T. (2019) Investigations into surface integrity and cylindricity error during peck drilling of aerospace alloy using graphite, MOS2 and blasocut lubricant. Materials Today: Proceedings, 18: 3091–3098. doi:10.1016/j.matpr.2019.07.182.
   Google Scholar
• Heisel, U.; Schaal, M. (2009) Burr formation in short hole drilling with minimum quantity lubrication. Production Engineering, 3(2): 157–163. doi:10.1007/s11740-009-0153-5.
   Google Scholar
• Jochem, C. (2006) () Mechanics and dynamics of drilling, Ph. D. thesis, Faculty of Applied Science, University British Columbia.
   Google Scholar
• Kaymakci, M.; Kilic, Z.; Altintas, Y. (2012) Unified cutting force model for turning, boring, drilling and milling operations. International Journal of Machine Tools and Manufacture, 54-55: 34–45. doi:10.1016/j.ijmachtools.2011.12.008.
   Web of Science ®Google Scholar
• Khan, S.A.; Shamail, S.; Anwar, S.; Hussain, A.; Ahmad, S.; Saleh, M. (2020) Wear performance of surface treated drills in high speed drilling of AISI 304 stainless steel. Journal of Manufacturing Processes, 58: 223–235. doi:10.1016/j.jmapro.2020.08.022.
   Web of Science ®Google Scholar
• Kilic, Z.; Altintas, Y. (2016) Generalized mechanics and dynamics of metal cutting operations for unified simulations. International Journal of Machine Tools and Manufacture, 104: 1–13. doi:10.1016/j.ijmachtools.2016.01.006.
   Web of Science ®Google Scholar
• Kilickap, E.; Hüseyinoglu, M. (2009) Effect of coolant technique on performance characteristic in drilling of 7075 aluminum alloy. Engineering Sciences, 4(4): 547–558.
   Google Scholar
• Kurt, M.; Kaynak, Y.; Bagci, E. (2008) Evaluation of drilled hole quality in Al 2024 alloy. The International Journal of Advanced Manufacturing Technology, 37(11-12): 1051–1060. doi:10.1007/s00170-007-1049-1.
   Web of Science ®Google Scholar
• Li, S.; Zhang, D.; Liu, C.; Tang, H. (2020) Exit burr height mechanistic modeling and experimental validation for low-frequency vibration-assisted drilling of aluminum 7075-T6 alloy. Journal of Manufacturing Processes, 56: 350–361. doi:10.1016/j.jmapro.2020.04.083.
   Web of Science ®Google Scholar
• Liu, Y.; Geng, D.; Zhang, D.; Zhai, Y.; Liu, L.; Sun, Z.; Shao, Z.; Zhang, M.; Jiang, X. (2023) Cutting performance and surface integrity for rotary ultrasonic elliptical milling of Inconel 718 with the ball end milling cutter. Journal of Materials Processing Technology, 319: 118094. doi:10.1016/j.jmatprotec.2023.118094.
   Google Scholar
• Martins, P.S.; Carneiro, J.R.G.; Ba, E.C.T.; Vieira, V.F. (2021) Study on roughness and form errors linked with tool wear in the drilling process of an Al-Si alloy under high cutting speed using coated diamond-like carbon high-speed steel drill bits. Journal of Manufacturing Processes, 62: 711–719. doi:10.1016/j.jmapro.2021.01.006.
   Web of Science ®Google Scholar
• Nieslony, P.; Cichosz, P.; Krolczyk, G.; Legutko, S.; Smyczek, D.; Kolodziej, M. (2016) Experimental studies of the cutting force and surface morphology of explosively clad Ti–steel plates. Measurement, 78: 129–137. doi:10.1016/j.measurement.2015.10.005.
   Web of Science ®Google Scholar
• Nieslony, P.; Krolczyk, G.; Zak, K.; Maruda, R.; Legutko, S. (2017) Comparative assessment of the mechanical and electromagnetic surfaces of explosively clad Ti–steel plates after drilling process. Precision Engineering, 47: 104–110. doi:10.1016/j.precisioneng.2016.07.011.
   Web of Science ®Google Scholar
• Nouari, M.; List, G.; Girot, F. A.; Gehin, D. (2005) Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloys. International Journal of Machine Tools and Manufacture, 45(12–13): 1436–1442. doi:10.1016/j.ijmachtools.2005.01.026
   Web of Science ®Google Scholar
• Okada, M.; Asakawa, N.; Sentoku, E.; M’Saoubi, R.; Ueda, T. (2014) Cutting performance of an indexable insert drill for difficult-to-cut materials under supplied oil mist. The International Journal of Advanced Manufacturing Technology, 72(1–4): 475–485. doi:10.1007/s00170-014-5691-0.
   Web of Science ®Google Scholar
• Paktinat, H.; Amini, S. (2017) Ultrasonic assistance in drilling: FEM analysis and experimental approaches. The International Journal of Advanced Manufacturing Technology, 92(5-8): 2653–2665. doi:10.1007/s00170-017-0285-2.
   Web of Science ®Google Scholar
• Parsian, A. (2018) Regenerative Chatter Vibration in Indexable Drills: Modeling and Simulation. University West.
   Google Scholar
• Parsian, A.; Magnevall, M.; Beno, T.; Eynian, M. (2017) Sound analysis in drilling, frequency and time domains. Procedia CIRP, 58: 411–415. doi:10.1016/j.procir.2017.03.242.
   Google Scholar
• Rahman, M.; Seah, K.; Venkatesh, V. (1988) Performance evaluation of endrills. International Journal of Machine Tools and Manufacture, 28(4): 341–349. doi:10.1016/0890-6955(88)90048-X.
   Web of Science ®Google Scholar
• Ralph, W.C.; Johnson, W.S.; Toivonen, P.; Makeev, A.; Newman Jr, J. (2006) Effect of various aircraft production drilling procedures on hole quality. International Journal of Fatigue, 28(8): 943–950. doi:10.1016/j.ijfatigue.2005.09.009.
   Web of Science ®Google Scholar
• Sekmen, M.; Günay, M.; Şeker, U. (2015) Alüminyum alaşımlarının işlenmesinde kesme hızı ve talaş açısının yüzey pürüzlülüğü, yığıntı talaş ve yığıntı katmanı oluşumu üzerine etkisi. Politeknik Dergisi, 18(3): 141–148. doi:10.2339/2015.18.3141-148.
   Google Scholar
• Shah, P.; Khanna, N.; Chetan.  (2020) Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques. Tribology International, 148: 106314. doi:10.1016/j.triboint.2020.106314.
   Web of Science ®Google Scholar
• Sheth, S.; George, P. (2016) Experimental investigation, prediction and optimization of cylindricity and perpendicularity during drilling of WCB material using grey relational analysis. Precision Engineering, 45: 33–43. doi:10.1016/j.precisioneng.2016.01.002
   Web of Science ®Google Scholar
• Sun, Z.; Geng, D.; Meng, F.; Zhou, L.; Jiang, X.; Zhang, D. (2023) High performance drilling of T800 CFRP composites by combining ultrasonic vibration and optimized drill structure. Ultrasonics, 134: 107097. doi:10.1016/j.ultras.2023.107097.
   PubMed Web of Science ®Google Scholar
• Svensson, D.; Andersson, T.; Andersson Lassila, A. (2022) Coupled Eulerian–Lagrangian simulation and experimental investigation of indexable drilling. The International Journal of Advanced Manufacturing Technology, 121(1–2): 471–486. doi:10.1007/s00170-022-09275-0.
   Web of Science ®Google Scholar
• Totten, G.E.; MacKenzie, D.S. (2003) Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes. CRC Press.
   Google Scholar
• Uddin, M.; Basak, A.; Pramanik, A.; Singh, S.; Krolczyk, G.M.; Prakash, C. (2018) Evaluating hole quality in drilling of Al 6061 alloys. Materials (Basel, Switzerland), 11(12): 2443. doi:10.3390/ma11122443.
   PubMed Web of Science ®Google Scholar
• Varatharajulu, M.; Shahithya, R.; Jayaprakash, G.; Baskar, N.; Davim, J.P. (2021) Evaluation of desirability function approach and grey relation analysis for modeling circularity, perpendicularity and cylindricity in drilling magnesium AZ31. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235(2): 238–248. doi:10.1177/0954408920952753.
   Web of Science ®Google Scholar
• Venkatesh, V.; Xue, W. (1996) A study of the built-up edge in drilling with indexable coated carbide inserts. Journal of Materials Processing Technology, 58(4): 379–384. doi:10.1016/0924-0136(95)02211-2.
   Web of Science ®Google Scholar
• Wang, S.; Venkatesh, V.; Xue, W. (1991) A study on modification of endrills for finishing holes. Journal of Materials Processing Technology, 28(1-2): 83–92. doi:10.1016/0924-0136(91)90208-V.
   Web of Science ®Google Scholar
• Xiang, J.; Xie, L.; Gao, F.; Yi, J.; Pang, S.; Wang, X. (2018) Diamond tools wear in drilling of SiCp/Al matrix composites containing copper. Ceramics International, 44(5): 5341–5351. doi:10.1016/j.ceramint.2017.12.154.
   Web of Science ®Google Scholar
• Yagmur, S.; Muharrem, P. (2021) Ti-6Al-4V Titanyum Alaşımının Delinmesinde Ön Delik Uygulamasının İşlenebilirliğe Etkisinin İncelenmesi. International Journal of Engineering Research and Development, 13(1): 170–177. doi:10.29137/umagd.771235.
   Google Scholar
• Yaman, K.; Bicakci, N.; Ozgedik, A. (2017a) Investigation of the drill length effect on hole tolerances. Journal of Polytechnic, 20(4): 765–775. doi:10.2339/politeknik.368982.
   Google Scholar
• Yaman, K.; Bicakci, N.; Ozgedik, A. (2017b) Matkap boyunun delik toleranslarına etkisinin incelenmesi. Politeknik Dergisi, 20(4): 765–775. doi:10.2339/politeknik.368982.
   Google Scholar
• Yaşar, N. (2019) Thrust force modelling and surface roughness optimization in drilling of AA-7075: FEM and GRA. Journal of Mechanical Science and Technology, 33(10): 4771–4781. doi:10.1007/s12206-019-0918-5.
   Web of Science ®Google Scholar
• Zhu, Z.; Guo, K.; Sun, J.; Li, J.; Liu, Y.; Zheng, Y.; Chen, L. (2018) Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack. Journal of Materials Processing Technology, 259: 270–281. doi:10.1016/j.jmatprotec.2018.04.044.
   Web of Science ®Google Scholar
• Zitoune, R.; Krishnaraj, V.; Collombet, F. (2010) Study of drilling of composite material and aluminium stack. Composite Structures, 92(5): 1246–1255. doi:10.1016/j.compstruct.2009.10.010.
   Web of Science ®Google Scholar