Determination of wax content in crude oil

References

• Abu El-Ella, R., and Nassef, E. (2014). Determination of wax content in Egyptian crude oils. Int. J. Eng. Trends Technol. 8:93–97.
   Google Scholar
• Adesina, F., Anthony, A., Churchill, A., and Olawale, D. (2010). Modeling of wax deposition during oil production using a two-phase flash calculation. Pet. Coal 52:193–202.
   Google Scholar
• Aiyejina, A., Chakrabarti, D. P., Pilgrim, A., and Sastry, M. (2011). Wax formation in oil pipelines: A critical review. Int. J. Multiphase Flow 37:671–694.
   Web of Science ®Google Scholar
• Ajayi, O. E. (2013). Modelling of controlled wax deposition and loosening in oil and gas production systems. Master's thesis, Trondheim, Norway: Department of Energy and Process Engineering Norwegian University of Science and Technology.
   Google Scholar
• As'ad, A. M., Yeneneh, A. M., and Obanijesu, E. O. (2015). Solvent dewaxing of heavy crude oil with methyl ethyl ketone. J. Pet. Environ. Biotechnol. 6:1–5.
   Google Scholar
• Chen, J., Zhang, J., and Li, H. (2004). Determining the wax content of crude oils by using differential scanning calorimetry. Thermochim. Acta 410:23–26.
   Web of Science ®Google Scholar
• Demirbas, A. (2016). Deposition and flocculation of asphaltenes from crude oils. Pet. Sci. Technol. 34:6–11.
   Web of Science ®Google Scholar
• Demirbas, A., Alidrisi, H., and Balubaid, M. A. (2015a). API gravity, sulfur content and desulfurization of crude oil. Pet. Sci. Technol. 33:93–101.
   Web of Science ®Google Scholar
• Demirbas, A., Alsulami, H. E., and Hassanein, W. S. (2015b). Utilization of surfactant flooding processes for enhanced oil recovery. Pet. Sci. Technol. 33:1331–1339.
   Web of Science ®Google Scholar
• Elsharkawy, A. M., Al-Sahhaf, T. A., and Fahim, M. A. (2000). Wax deposition from Middle East crudes. Fuel 79:1047–1055.
   Web of Science ®Google Scholar
• Huang, Z., Lu, Y., Hoffman, R., Amundsen, L., and Fogler, H. S. (2011). The effect of operating temperatures on wax deposition. Energy Fuels 225:5180–5188.
   Web of Science ®Google Scholar
• Kok, M. V., Letoffe, J. M., and Clau, P. (2007). Comparative methods in the determination of wax content and pour points of crude oils. J. Therm. Anal. Calorim. 90:827–831.
   Web of Science ®Google Scholar
• Kok, M. V., and Saracoglu, R. O. (2000). Mathematical modelling of wax deposition in crude oil pipelines (comparative study). Pet. Sci. Technol. 18:1121–1145.
   Web of Science ®Google Scholar
• Lu, X., and Redelius, P. (2007). Effect of bitumen wax on asphalt mixture performance. Constr. Build. Mater. 21:1961–1970.
   Web of Science ®Google Scholar
• Majhi, A., Sharma, Y. K., Kukreti, V. S., Bhatt, K. P., and Khanna, R. (2015). Wax content of crude oil: A function of kinematic viscosity and pour point. Pet. Sci. Technol. 33:381–387.
   Web of Science ®Google Scholar
• McKay, J. F., Branthaver, J. F., and Robertson, R. E. (1995). Isolation of waxes from asphalts and influence of waxes on asphalt rheological properties. ACS 210, National Meeting of the American Chemical Society (ACS), Chicago, Illinois, August 20–25.
   Google Scholar
• Musser, B. J., and Kilpatrick, P. K. (1998). Molecular characterization of wax isolated from a variety of crude oils. Energy Fuels 12:715–725.
   Web of Science ®Google Scholar
• Nizami, A. (2016). Waxes fraction of crude oil. Energy Ed. Sci. Technol.-C 8:55–62.
   Google Scholar
• Paso, K. G. (2014). Comprehensive treatise on shut-in and restart of waxy oil pipelines. J. Dispers. Sci. Technol. 35:1060–1085.
   Web of Science ®Google Scholar
• Pu, H., Ai, M., Miao, Q., and Yan, F. (2014). The structural characteristics of low-temperature waxy crude. Pet. Sci. Technol. 32:646–653.
   Web of Science ®Google Scholar
• Richter, F. (2002). Effect of waxes on bitumen quality. Oil Gas Eur. Mag. 2:35–38.
   Google Scholar
• Robustillo, M. D., Coto, B., Martos, C., and Espada, J. J. (2012). Assessment of different methods to determine the total wax content of crude oils. Energy Fuels 26:6352–6357.
   Web of Science ®Google Scholar
• Shen, F., Zhao, M., Lu, J., and Ding, Q. (2014). Study on performance of porous regenerative asphalt concrete. Energy Ed. Sci. Technol.-A 32:5253–5258.
   Google Scholar
• Speight, J. G. (1991). The Chemistry and Technology of Petroleum. New York: Marcel Dekker.
   Google Scholar
• Spiecker, P. M., Gawrys, K. L., Trail, C. B., and Kilpatrick, P. K. (2003). Effects of petroleum resins on asphaltene aggregation and water-in-oil emulsion formation. Colloids Surf., A: Physicochem. Eng. Aspects 220:9–27.
   Web of Science ®Google Scholar
• Such, C., Planque, L., Lombardi, B., Planche, J. P., Gillet, J. P., and Seive, A. (2000). Les paraffines dans les bitumes [Paraffins in bitumes]. Second Eurasphalt & Eurobitume Congress, Barcelona, Spain, September 20–22.
   Google Scholar
• Valinejad, R., and Nazar, A. R. S. (2013). An experimental design approach for investigating the effects of operating factors on the wax deposition in pipelines. Fuel 106:843–850.
   Web of Science ®Google Scholar
• Xiaohu, L., Kalman, B., and Redelius, P. (2008). A simple test method for determination of waxes in crude oils and bitumens. 4th Eurasphalt and Eurobitume Congress, Copenhagen, Denmark, May 2008.
   Google Scholar
• Zhang, M., Li, T., Tang, L., Han, Z., and Peng, Y. (2014). Evaluation of reservoir damage characteristics and countermeasures in Jiyuan oilfield. Energy Ed. Sci. Technol.-A 32:5133–5140.
   Google Scholar