References
- Ashizawa, M., Hara, S., Kidoguchi, K., and Inumaru, J. (2005). Gasification characteristics of extra-heavy oil in a research-scale gasifier. Energy 30:2194–2205.
- Bai, D., and Kato, K. (1999). Quantitative estimation of solids holdups at dense and dilute regions of circulating fluidized beds. Powder Technol. 101:183–90.
- Jun, X. J., Min, Y. X., Lei, Z., Li, D. T., Li, A. W., and Gang, L. W. (2007). Emissions of SO2, NO and N2O in a circulating fluidized bed combustor during co-firing coal and biomass. J. Environ. Sci. 19:109–106.
- Miao, Q., Zhu, J., Barghi, S., Wu, C., Yin, X., and Zhou, Z. (2013). Modeling biomass gasification in circulating fluidized beds. Renewable Energy 50:655–661.
- Na, T., Baodong, C., Limin, H., Qisheng, C., and Qi, W. (2012). Research on the overall heat transfer coefficients crude oil pipeline and product pipeline laid in one ditch. Pet. Sci. Technol. 30:247–255.
- Reid, R. C., Prausnitz, J. M., and Poling, B. E. (1987). The properties of gases & liquids (4th ed.). New York, NY: McGraw-Hill.
- Singer, S. L., and Ghoniem, A. F. (2013). Comprehensive gasification modeling of char particles with multi-modal pore structures. Combust. Flame 160:120–137.
- Zhang, H., Degreve, J., Baeyens, J., and Dewil, R. (2014). Wall-to-bed heat transfer at minimum gas solid fluidization. J. Power Technol. 2014:163459.
- Zhang, L., and Kong, S. C. (2009). Modeling of multi-component fuel vaporization and combustion for gasoline and diesel spray. Chem. Eng. Sci. 64:3688–3696.