References
- American Association of State and Highway Transportation Officials. (2012). Estimating damage tolerance of asphalt binders using the linear amplitude sweep ( AASTHO TP 101. 12., UL). Washington, DC: AASHTO.
- American Association of State and Highway Transportation Officials. (2009). Standard method of test for effect of heat and air on a moving film of asphalt ( AASHTO T 240. 09). Washington, DC: AASHTO.
- Babagoli, R., Ameli, A., and Shahriari, H. (2016). Laboratory evaluation of rutting performance of cold recycling asphalt mixtures containing SBS modified asphalt emulsion. Pet. Sci. Technol. 34:309–313.
- Bahia, H. U., Hanson, D. I., and Zeng, M. (2001a). Characterization of modified asphalt binders in superpave mix design. NCHRP Report 459. Washington, DC: Transportation Research Board, National Research Council.
- Bahia, H. U., Hanson, D., Zeng, M., Zhai, H., Khatri, M. A., and Anderson, R. M. (2001b). Characterization of modified asphalt binders in Superpave mix design. NCHRP Report 459. Washington, DC: National Academy Press.
- Bahia, H. U., Zhai, H., Bonnetti, K., and Kose, S. (1999). Non-linear viscoelastic and fatigue properties of asphalt binders. J. Assoc. Asphalt Paving Technol. 68:1–34.
- Bahia, H. U., Zhai, H., Zeng, M., Hu, Y., and Turner, P. (2001). Development of binder specification parameters based on characterization of damage behavior. J. Assoc. Asphalt Paving Technol. 70:442–470.
- Cong, P., Xun, P., Xing, M., and Chen, S. (2013). Investigation of asphalt binder containing various crumb rubbers and asphalts. Constr. Build. Mater. 40:632–641.
- Fang, C., Yu, R., Liu, S., and Li, Y. (2013). Nanomaterials applied in asphalt modification: a review. J. Mater. Sci. Technol. 29:589–594.
- Kim, Y. R. (2008). Modeling of asphalt concrete. New York, NY: McGraw-Hill Construction.
- Running, D. L. (1996). An energy-based model for soil liquefaction. PhD thesis, Pullman, WA: Department of Civil and Environmental Engineering, Washington State University.
- Sun, D., Ye, F., Shi, F., and Lu, W. (2006). Storage stability of SBS-modified road asphalt: Preparation, morphology, and rheological properties. Pet. Sci. Technol. 24:1067–1077.
- Wang, C., Zhang, H., Castorena, C., Zhang, J., and Kim, Y. R. (2016). Identifying fatigue failure in asphalt binder time sweep tests. Constr. Build. Mater. 121:535–546.
- Zhang, F., and Hu, C. (2015). The research for structural characteristics and modification mechanism of crumb rubber compound modified asphalts. Constr. Build. Mater. 76:330–342.