References
- Aktaş, B., and Karaşahin, M. (2013). Chip seal adhesion performance with modified binder in cold climates: Experimental investigation. Transp. Res. Rec. J. Transp. Res. Board 2361:63–68.
- Cong, Y., Liao, K., Huang, W., and Zhai, Y. (2006). Performance of SBR-Modified Asphalt Yufeng Cong. Pet. Sci. Technol. 24:1187–1194.
- Johnston, J., and Gayle, K. (2009). Polymer modified Asphalt emulsions. Composition uses and specifications for surface treatments. FHWA Publication No. FHWA–CFL/TD_08_00x.
- Karaşahin, M., Gürer, C., Saltan, M., Taciroğlu, M. V., and Uz, V. E. (2015). Investigation of chip seal performance under cold climate conditions. Sci. Eng. Compos. Mater. DOI: 10.1515/secm-2014-0041:1-9.
- Khadivar, A., and Kavussi, A. (2013). Rheological characteristics of SBR and NR polymer modified bitumen emulsions at average pavement temperatures. Constr. Build. Mater. 47:1099–1105.
- Kim, Y. R., and Im, J. H. (2014). Extending the Use of Chip Seals to High Volume Roads by Using Polymer-Modified Emulsions and Optimized Construction procedures. Final Report No. HWY-2011-03, North Carolina Department of Transportation, Raleigh, NC.
- Lee, J., and Kim, R. Y. (2014). Evaluation of polymer-modified chip seals at low temperatures. Int. J. Pavement Eng. 15:228–237.
- Moraes, R., and Bahia, H. (2013). Effects of curing and oxidative aging on raveling in emulsion chip seals. Transp. Res. Record J. Transp. Res. Board 2361:69–79.
- Rezaei, S., Ziari, H., and Nowbakht, S. (2016). Low temperature functional analysis of bitumen modified with composite of nano-SiO2 and styrene butadiene styrene polymer. Pet. Sci. Technol. 34:415–421.
- Yousefi, A. A. (2013). Segmental mobility in the vicinity of Tg in PS/SBR blends: Nanodomain size prediction of the dispersed phase. J. Appl. Polym. Sci. 127:659–665.
- Ziari, H., Akbari, T., Farahani, H., and Goli, A. (2016). The effect of Lucobit polymer on bitumen performance. Pet. Sci. Technol. 34:512–516.