Prediction of asphaltene deposition during turbulent flow using heat transfer approach

References

• Bergman, T. L., F. P. Incropera, D. P. DeWitt, and A. S. Lavine. 2011. Fundamentals of heat and mass transfer. Hoboken: John Wiley & Sons.
   Google Scholar
• Bott, T. R. 1995. Fouling of heat exchangers. Amsterdam Elsevier.
   Google Scholar
• Broseta, D., M. Robin, T. Savvidis, C. Féjean, M. Durandeau, and H. Zhou, Year. editors. Detection of asphaltene deposition by capillary flow measurements. SPE/DOE Improved Oil Recovery Symposium; 2000: Tulsa, Oklahoma: Society of Petroleum Engineers; Published.
   Google Scholar
• Buckley, J. S. 2012. Asphaltene deposition. Energy & Fuels. 26 (7):408690.
   Web of Science ®Google Scholar
• Chen, X., T. Butler, M. Volk, and J. Brill, Year. editors. Techniques for measuring wax thickness during single and multiphase flow. SPE Annual Technical Conference and Exhibition; 1997: San Antonio, Texas: Society of Petroleum Engineers; Published.
   Google Scholar
• Cragoe, C. S. 1929. Thermal Properties of Petroleum Products: November 9, 1929. vol 97. Washington: US Government Printing Office.
   Google Scholar
• Dudášová, D., A. Silset, and J. Sjöblom. 2008. Quartz crystal microbalance monitoring of asphaltene adsorption/deposition. Journal of Dispersion Science and Technology. 29 (1):13946.
   Web of Science ®Google Scholar
• Faus, F. M., P. Grange, and B. Delmon. 1984. Influence of asphaltene deposition on catalytic activity of cobalt molybdenum on alumina catalysts. Applied catalysis. 11 (2):28193.
   Google Scholar
• Hirschberg, A., L. DeJong, B. Schipper, and J. Meijer. 1984. Influence of temperature and pressure on asphaltene flocculation. Society of Petroleum Engineers Journal. 24 (03):283–93.
   Google Scholar
• Hoepfner, M. P., V. Limsakoune, V. Chuenmeechao, T. Maqbool, and H. S. Fogler. 2013. A fundamental study of asphaltene deposition. Energy & Fuels. 7 (2):725735.
   Google Scholar
• Hoey, J. M., A. Lutfurakhmanov, D. L. Schulz, and I. S. Akhatov. 2012. A review on aerosol-based direct-write and its applications for microelectronics. Journal of Nanotechnology.
   Google Scholar
• Jamialahmadi, M., B. Soltani, H. Müller-Steinhagen, and D. Rashtchian. 2009. Measurement and prediction of the rate of deposition of flocculated asphaltene particles from oil. International Journal of Heat and Mass Transfer. 52 (19):462434.
   Web of Science ®Google Scholar
• Kariznovi, M., H. Nourozieh, J. Abedi, M. Jamialahmadi, and A. Shahrabadi. 2012. Experimental, modelling and optimisation of asphaltene deposition and adsorption in porous media. The Canadian Journal of Chemical Engineering. 90 (5):135668.
   Web of Science ®Google Scholar
• Saleh, Z. S., R. Sheikholeslami, and A. Watkinson. 2005. Fouling characteristics of a light Australian crude oil. Heat transfer engineering. 26 (1):1522.
   Web of Science ®Google Scholar
• Salimi, F., S. Ayatollahi, and M. Vafaie Seftie. 2017. An Experimental Investigation and Prediction of Asphaltene Deposition during Laminar Flow in the Pipes Using a Heat Transfer Approach. Iranian Journal of Oil & Gas Science and Technology. 6 (2):1732.
   Google Scholar
• Salimi, F., J. Salimi, and M. Abdollahifar. 2016. Investigation of asphaltene deposition under dynamic flow conditions. Petroleum Science. 13 (2):3406.
   Web of Science ®Google Scholar
• Salimi, F., M. V. Seftie, and S. Ayatollahia. 2013. Experimental Investigation of the Effects of Different Parameters on the Rate of Asphaltene Deposition in Laminar Flow and Its Prediction Using Heat Transfer Approach. J. Dispersion Science Tech. 34 (12):16906.
   Web of Science ®Google Scholar
• Serth, R. W., and T. Lestina. 2014. Process heat transfer: Principles, applications and rules of thumb. Elsevier Science & Technology Books, Boston: Academic Press.
   Google Scholar
• Shirdel, M., D. Paes, P. Ribeiro, and K. Sepehrnoori. 2012. Evaluation and comparison of different models for asphaltene particle deposition in flow streams. J. Petroleum Sci. Eng. 84:5771.
   Web of Science ®Google Scholar
• Sloan, E. D., C. A. Koh, and A. Sum. 2010. Natural gas hydrates in flow assurance, Boston: Elsevier Inc., Gulf Professional Publishing.
   Google Scholar
• Soltani Soulgani, B., D. Rashtchian, B. Tohidi, and M. Jamialahmadi. 2009. Integrated Modelling Methods for Asphaltene Deposition in Wellstring. J. Japan Petro. Institute. 52 (6):32231.
   Web of Science ®Google Scholar
• Srinivasan, M., and A. Watkinson. 2005. Fouling of some Canadian crude oils. Heat Transfer Engineering. 26 (1):714.
   Web of Science ®Google Scholar
• Stachowiak, G., and A. W. Batchelor. 2013. Engineering tribology. Boston: Butterworth-Heinemann.
   Google Scholar
• Wang, J., J. S. Buckley, J. L. Creek. 2004. Asphaltene deposition on metallic surfaces. Journal of Dispersion Science and Technology. 25 (3):28798.
   Web of Science ®Google Scholar
• Watkinson, and A. P. Particulate fouling of sensible heat exchangers. 1968. PHD thesis, University of British Columbia.
   Google Scholar