References
- Abu Bakar, R., S. Ismail, and A. R. Ismail. 2008. Fuel injection pressure effect on performance of direct injection diesel engines based on experiment. American Journal of Applied Sciences 5 (3):197–202. doi:https://doi.org/10.3844/ajassp.2008.197.202.
- Agarwal, A. K., P. Gupta, and A. Dhar. 2015. Combustion, performance and emissions characteristics of a newly developed CRDI single cylinder diesel engine. Sadhana - Sadhana 40 (6):1937–54. doi:https://doi.org/10.1007/s12046-015-0428-9.
- Al-Rousan, A. A. 2010. Reduction of fuel consumption in gasoline engines by introducing HHO gas into intake manifold. International Journal of Hydrogen Energy 35 (23):12930–5. doi:https://doi.org/10.1016/j.ijhydene.2010.08.144.
- Aljamali, S., S. Abdullah, W. M. Faizal Wan Mahmood, and Y. Ali. 2016. Effect of fuel injection timings on performance and emissions of stratified combustion CNGDI engine. Applied Thermal Engineering 109:619–29. doi:https://doi.org/10.1016/j.applthermaleng.2016.08.127.
- Baltacioglu, M. K., R. Kenanoglu, and K. Aydın. 2019. HHO enrichment of bio-diesohol fuel blends in a single cylinder diesel engine. International Journal of Hydrogen Energy 44 (34):18993–9004. doi:https://doi.org/10.1016/j.ijhydene.2019.02.060.
- Bhave, N. A., M. M. Gupta, and S. S. Joshi. 2020. Effect of Brown’s gas addition on combustion and emissions of homogeneous charge compression ignition engine. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. doi:https://doi.org/10.1080/15567036.2020.1817194.
- Brijesh, P., and S. Sreedhara. 2013. Exhaust emissions and its control methods in compression ignition engines: a review. International Journal of Automotive Technology 14 (2):195–206. doi:https://doi.org/10.1007/s12239-013-0022-2.
- Duan, X., M. C. Lai, M. Jansons, G. Guo, and J. Liu. 2021. A review of controlling strategies of the ignition timing and combustion phase in homogeneous charge compression ignition (HCCI) engine. Fuel 285(May 2020):119142. doi:https://doi.org/10.1016/j.fuel.2020.119142..
- Duan, X., J. Liu, J. Yao, Z. Chen, C. Wu, C. Chen, and H. Dong. 2018. Performance, combustion and knock assessment of a high compression ratio and lean-burn heavy-duty spark-ignition engine fuelled with n-butane and liquefied methane gas blend. Energy 158:256–68. doi:https://doi.org/10.1016/j.energy.2018.03.014.
- Duan, X., Y. Liu, J. Liu, M. C. Lai, M. Jansons, G. Guo, S. Zhang, and Q. Tang. 2019. Experimental and numerical investigation of the effects of low-pressure, high-pressure and internal egr configurations on the performance, combustion and emission characteristics in a hydrogen-enriched heavy-duty lean-burn natural gas SI engine. Energy Conversion and Management 195 (May):1319–33. doi:https://doi.org/10.1016/j.enconman.2019.05.059.
- Guo, T., X. Duan, Y. Liu, J. Liu, X. Zhou, Y. Li, M. Chia Lai, and G. Guo. 2020. A comparative experimental study on emission characteristics of a turbocharged gasoline direct-injection (TGDI) engine fuelled with gasoline/ethanol blends under transient cold-start and steady-state conditions. Fuel 277 (May):118153. doi:https://doi.org/10.1016/j.fuel.2020.118153.
- Heywood, J. B. 1988. Internal combustion engine fundamentals. New York : McGraw-Hill.
- Hooftman, N., M. Messagie, J. Van Mierlo, and T. Coosemans. 2018. A review of the European passenger car regulations – real driving emissions vs local air quality. Renewable and Sustainable Energy Reviews 86:1–21. doi:https://doi.org/10.1016/j.rser.2018.01.012.
- Jayabal, R., L. Thangavelu, and S. Subramani. 2020. Combined effect of oxygenated additives, injection timing and EGR on combustion, performance and emission characteristics of a CRDi diesel engine powered by Sapota biodiesel/diesel blends. Fuel 276:118020. doi:https://doi.org/10.1016/j.fuel.2020.118020.
- Joy, N., K. N. Balan, B. Nagappan, and S. Justin Abraham Baby. 2020. Emission analysis of diesel and butanol blends in research diesel engine. Petroleum Science and Technology 38 (4):289–96. doi:https://doi.org/10.1080/10916466.2019.1702680.
- Kiplimo, R., E. Tomita, N. Kawahara, and S. Yokobe. 2012. Effects of spray impingement, injection parameters, and EGR on the combustion and emission characteristics of a PCCI diesel engine. Applied Thermal Engineering 37:165–75. doi:https://doi.org/10.1016/j.applthermaleng.2011.11.011.
- Kumar Sharma, P., D. Sharma, S. Lal Soni, A. Jhalani, D. Singh, and S. Sharma. 2020. Energy, exergy, and emission analysis of a hydroxyl fueled compression ignition engine under dual fuel mode. Fuel 265 (November 2019):116923. doi:https://doi.org/10.1016/j.fuel.2019.116923..
- Li, T., and H. Ogawa. 2011. Analysis of the trade-off between soot and nitrogen oxides in diesel-like combustion by chemical kinetic calculation. SAE International Journal of Engines 5(2):94–101. doi:https://doi.org/10.4271/2011-01-1847.
- Liang, X., Z. Zheng, H. Zhang, Y. Wang, and H. Yu. 2019. A review of early injection strategy in premixed combustion engines. Applied Sciences ( Sciences 9 (18):3737. doi:https://doi.org/10.3390/app9183737.
- Liu, S., Z. Wang, X. X. Li, Y. Zhao, and R. N. Li. 2016. Effects on emissions of a diesel engine with premixed HHO. RSC Advances 6 (28):23383–9. doi:https://doi.org/10.1039/C5RA27761B.
- Mallamo, F., M. Badami, and F. Millo. 2005. Effect of compression ratio and injection pressure on emissions and fuel consumption of a small displacement common rail diesel engine. SAE Technical Papers. doi:https://doi.org/10.4271/2005-01-0379.
- Masjuki, H. H., A. M. Ruhul, N. N. Mustafi, M. A. Kalam, M. I. Arbab, and I. M. Rizwanul Fattah. 2016. Study of production optimization and effect of hydroxyl gas on a CI engine performance and emission fueled with biodiesel blends. International Journal of Hydrogen Energy 41 (33):14519–28. doi:https://doi.org/10.1016/j.ijhydene.2016.05.273.
- Nikhil Aniruddha, B., M. Gupta, and S. Joshi. 2021. Combustion, performance and emission characteristics of early direct injection compression ignition engine with varying oxy hydrogen gas concentration. Paper presented at the SAE Technical Paper Series. SAE International. doi:https://doi.org/10.4271/2021-01-1171.
- Park, S. H., J. Cha, H. J. Kim, and C. S. Lee. 2012. Effect of early injection strategy on spray atomization and emission reduction characteristics in bioethanol blended diesel fueled engine. Energy 39 (1):375–87. doi:https://doi.org/10.1016/j.energy.2011.12.050.
- Rimkus, A., J. Matijošius, M. Bogdevičius, Á. Bereczky, and Á. Török. 2018. An investigation of the efficiency of using O2 and H2 (hydroxide gas-HHO) gas additives in a ci engine operating on diesel fuel and biodiesel. Energy 152:640–51. doi:https://doi.org/10.1016/j.energy.2018.03.087.
- Rodríguez Matienzo, J. M. 2018. Influence of addition of hydrogen produced on board in the performance of a stationary diesel engine. International Journal of Hydrogen Energy 43 (37):17889–97. doi:https://doi.org/10.1016/j.ijhydene.2018.07.023.
- Siewert, R. M. 2007. Spray angle and rail pressure study for low NOx diesel combustion. SAE Technical Papers 2007:776–90. doi:https://doi.org/10.4271/2007-01-0122.
- Subramanian, B., and S. Ismail. 2018. Production and use of HHO gas in IC engines. International Journal of Hydrogen Energy 43 (14):7140–54. doi:https://doi.org/10.1016/j.ijhydene.2018.02.120.
- Thangaraj, S., and N. Govindan. 2018a. Investigating the pros and cons of browns gas and varying EGR on combustion, performance, and emission characteristics of diesel engine. Environmental Science and Pollution Research International 25 (1):422–35. doi:https://doi.org/10.1007/s11356-017-0369-4.
- Thangaraj, S., and N. Govindan. 2018b. Evaluating combustion, performance and emission characteristics of diesel engine using Karanja oil methyl ester biodiesel blends enriched with HHO gas. International Journal of Hydrogen Energy 43 (12):6443–55. doi:https://doi.org/10.1016/j.ijhydene.2018.02.036.
- Wamankar, A. K., and S. Murugan. 2015. Effect of injection timing on a di diesel engine fuelled with a synthetic fuel blend. Journal of the Energy Institute 88 (4):406–13. doi:https://doi.org/10.1016/j.joei.2014.11.003.