139
Views
0
CrossRef citations to date
0
Altmetric
Reservoir Simulation

Enhancing acid fracture design in carbonate formation using a dynamic up-scaling procedure to convert discrete fracture network to dual continuum

, , &

References

  • Al Jawad, M. S. 2014. Modeling of acid fracturing in carbonate reservoirs. Doctoral dissertation, Texas A&M University, College Station, Texas. https://hdl.handle.net/1969.1/173663.
  • Aljawad, M. S., M. Palharini Schwalbert, D. Zhu, and A. D. Hill. 2020. Optimizing acid fracture design in calcite formations: Guidelines using a fully integrated model. SPE Production & Operations 35 (1):161–77. doi:https://doi.org/10.2118/198912-PA.
  • Aljawad, M. S., M. P. Schwalbert, D. Zhu, and A. D. Hill. 2020. Improving acid fracture design in dolomite formations utilizing a fully integrated acid fracture model. Journal of Petroleum Science and Engineering 184:106481. doi:https://doi.org/10.1016/j.petrol.2019.106481.
  • Aziz, K. 1979. Petroleum reservoir simulation. London: Applied Science Publishers.
  • Barree, R. D.,S. A. Cox,V. L. Barree, andM. W. Conway. 2003. Realistic Assessment of Proppant Pack Conductivity for Material Selection. SPE Annual Technical Conference and Exhibition.
  • Barree, DR. 1983.A practical numerical simulator for three-dimensional fracture propagation in heterogeneous media, Society of Petroleum Engineers, SPE reservoir simulation symposium.
  • Bartko, K. M.,H. A. Nasr-El-Din,Z. Rahim, andG. A. Al-Muntasheri. 2003. Acid Fracturing of a Gas Carbonate Reservoir: The Impact of Acid Type and Lithology on Fracture Half Length and Width. SPE Annual Technical Conference and Exhibition.
  • Bashiri, G. 2011. Iranian oil fields geology and gas injection necessary. Exploration and Production Oil & Gas 1390 (77):6–11. http://ekteshaf.nioc.ir/article-1-629-fa.html
  • Brohi, I. G.,M. Pooladi-Darvish, andR. Aguilera. 2011. Modeling fractured horizontal wells as dual porosity composite reservoirs-application to tight gas, shale gas and tight oil cases. Society of Petroleum Engineers.
  • Carter, B., J. Desroches, A. Ingraffea, and P. Wawrzynek. 2000. Simulating fully 3D hydraulic fracturing. Modeling in Geomechanics 200:525–57.
  • Cinco-Ley, H., and F. Samaniego-V. 1981. Transient pressure analysis for fractured wells. Journal of Petroleum Technology 33 (09):1749–66. doi:https://doi.org/10.2118/7490-PA.
  • Deng, J., J. Mou, A. D. Hill, and D. Zhu. 2012. A new correlation of acid-fracture conductivity subject to closure stress. SPE Production & Operations 27 (02):158–69. doi:https://doi.org/10.2118/140402-PA.
  • Fan, C., M. Luo, S. Li, H. Zhang, Z. Yang, and Z. Liu. 2019. A thermo-hydro-mechanical-chemical coupling model and its application in acid fracturing enhanced coalbed methane recovery simulation. Energies 12 (4):626. doi:https://doi.org/10.3390/en12040626.
  • Fracman. 2012. FRACMAN user documentation MAFIC simulaltor.
  • Geertsma, J., and F. De Klerk. 1969. A rapid method of predicting width and extent of hydraulically induced fractures. Journal of Petroleum Technology 21 (12):1571–81. doi:https://doi.org/10.2118/2458-PA.
  • Gilman, J. R., and H. Kazemi. 1983. Improvements in simulation of naturally fractured reservoirs. Society of Petroleum Engineers Journal 23 (04):695–707. doi:https://doi.org/10.2118/10511-PA.
  • GOHFER. 2016. GOHFER user manual.
  • Gong, M.,S. Lacote, andA. D. Hill. 1999. New Model of Acid-Fracture Conductivity Based on Deformation of Surface Asperities. SPE J. 4 (03):206–214.
  • He, X., M. Sinan, H. Kwak, and H. Hoteit. 2021. A corrected cubic law for single-phase laminar flow through rough-walled fractures. Advances in Water Resources 154:103984. doi:https://doi.org/10.1016/j.advwatres.2021.103984.
  • Hoteit, H., and A. Chawathé. 2016. Making field-scale chemical enhanced-oil-recovery simulations a practical reality with dynamic gridding. SPE Journal 21 (06):2220–37. doi:https://doi.org/10.2118/169688-PA.
  • Howard, G. C., and C. R. Fast. 1970. Hydraulic fracturing. New York, Society of Petroleum Engineers of AIME 1970:210.
  • Ji, L., A. Settari, and R. B. Sullivan. 2009. A novel hydraulic fracturing model fully coupled with geomechanics and reservoir simulation. SPE Journal 14 (04):423–30. doi:https://doi.org/10.2118/110845-PA.
  • Kalfayan, L. 2008. Production enhancement with acid stimulation. Second edition. Tesla, Oklahama: Pennwell Books.
  • Lingen, P. vM. Sengul,J.-M. Daniel, andL. Cosentino. 2001. Single Medium Simulation of Reservoirs with Conductive Faults and Fractures. SPE Middle East Oil Show.
  • Meyer, B. R., andL. W. Bazan. 2011. A Discrete Fracture Network Model for Hydraulically Induced Fractures- Theory, Parametric and Case Studies. SPE Hydraulic Fracturing Technology Conference.
  • Morales, R., and A. Abou-Sayed. 1989. Microcomputer analysis of hydraulic fracture behavior with a pseudo-three-dimensional simulator. SPE Production Engineering 4 (01):69–74. doi:https://doi.org/10.2118/15305-PA.
  • Nierode, D. E., andK. F. Kruk. 1973. An Evaluation of Acid Fluid Loss Additives Retarded Acids, and Acidized Fracture Conductivity. Fall Meeting of the Society of Petroleum Engineers of AIME.
  • Nordgren, R. 1972. Propagation of a vertical hydraulic fracture. Society of Petroleum Engineers Journal 12 (4):306–14. doi:https://doi.org/10.2118/3009-PA.
  • Oeth, C., A. D. Hill, D. Zhu, and R. Sullivan. 2013. Characterization of small scale heterogeneity to predict acid fracture performance. Journal of Petroleum Science and Engineering 110:139–48. doi:https://doi.org/10.1016/j.petrol.2013.08.001.
  • Perkins, T., and L. R. Kern. 1961. Widths of hydraulic fractures. Journal of Petroleum Technology 13 (9):937–49. doi:https://doi.org/10.2118/89-PA.
  • Pinder, G. F., and W. G. Gray. 1977. Finite element simulation in surface and subsurface hydrology. First Edition. New York: ‎ Academic Pr.
  • Sadrpanah, H.,T. Charles, andJ. Fulton. 2006. Explicit Simulation of Multiple Hydraulic Fractures in Horizontal Wells. SPE Europec/eage Annual Conference and Exhibition.
  • Salamanca, Marina Sacramento,Modeling of fractured producer and injection in low permeability reservoir, Master's thesis, NTNU, 2013
  • Samier, Pierre, De Gennaro, Sergio. 2007.A practical iterative scheme for coupling geomechanics with reservoir simulation, Society of Petroleum Engineers, EUROPEC/EAGE Conference and Exhibition.
  • Settari, A., R. Bachman, K. Hovem, and S. Paulsen. 1996. Productivity of Fractured Gas Condensate Wells-A Case Study of the Smorbukk Field. SPE Reservoir Engineering 11 (4):236–44. doi:https://doi.org/10.2118/35604-PA.
  • Shu, Y., and J. Yan. 2008. Characterization and prevention of formation damage for fractured carbonate reservoir formations with low permeability. Petroleum Science 5 (4):326–33. doi:https://doi.org/10.1007/s12182-008-0055-8.
  • Tang, Y., C. Hou, Y. He, Y. Wang, Y. Chen, and Z. Rui. 2021. Review on pore structure characterization and microscopic flow mechanism of CO2 flooding in porous media. Energy Technology 9 (1):2000787. doi:https://doi.org/10.1002/ente.202000787.
  • Wang, L., M. B. Cardenas, D. T. Slottke, R. A. Ketcham, and J. M. Sharp. Jr. 2015. Modification of the local cubic law of fracture flow for weak inertia, tortuosity, and roughness. Water Resources Research 51 (4):2064–80. doi:https://doi.org/10.1002/2014WR015815.
  • Wang, Y., X. Li, and J. Lu. 2021. Experimental study of natural ions and rock interactions for seawater breakthrough percentage monitoring during offshore seawater flooding. SPE Journal 26 (06):3949–69. doi:https://doi.org/10.2118/201553-PA.
  • Wang, C., Q. Ran, and Y.-S. Wu. 2019. Robust implementations of the 3D-EDFM algorithm for reservoir simulation with complicated hydraulic fractures. Journal of Petroleum Science and Engineering 181:106229. doi:https://doi.org/10.1016/j.petrol.2019.106229.
  • Wu, X., A. D. Hill, C. Oeth, D. Zhu, and E. Gildin. 2013. Integrated 3D Acid Fracturing Model for Carbonate Reservoir Stimulation. Paper presented at OTC Brasil, Rio de Janeiro, Brazil, October 29.
  • Wu, Xi. 2014. Integrated 3D Acid Fracturing Model for Carbonate Reservoir Stimulation. Texas A & M University. https://hdl.handle.net/1969.1/153319.
  • Xu, Y., J. S. Cavalcante Filho, W. Yu, and K. Sepehrnoori. 2017. Discrete-fracture modeling of complex hydraulic-fracture geometries in reservoir simulators. SPE Reservoir Evaluation & Engineering 20 (2):403–22.
  • Xue, X., C. Yang, T. Onishi, M. J. King, and A. Datta-Gupta. 2019. Modeling hydraulically fractured shale wells using the fast-marching method with local grid refinements and an embedded discrete fracture model. SPE Journal 24 (06):2590–608. doi:https://doi.org/10.2118/193822-PA.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.