AN APPRAISAL OF EMPIRICAL MODELING AND PROPRIETARY SOFTWARE DATABASES FOR PERFORMANCE PREDICTION OF MACHINING OPERATIONS

References

• Finnie , I. 1956 , Review of the Metal Cutting Analyses of the Past Hundred Years , Amer. Soc. Mech. Engrs., Mech. Eng. , 78 , p. 715 .
   Google Scholar
• Armarego , E. J. A. , 1996 , Predictive Modelling of Machining Operations-A means of Bridging the Gap between Theory and Practice in Machining, Proc. of Canadian Society of Mechanical Engineering Forum , (CSME Forum' 96), Hamilton, Ontario , Canada , pp. 18 – 27 .
   Google Scholar
• Ai , X. , Tao , Q. and Xiao , S. , 1966 , Metal Cutting Conditions Handbook , Mech. Industry Press, China .
   Google Scholar
• Ai , X. , and Xiao , S. , 1985 , Metal Cutting Conditions Handbook , Mech. Industry Press, China .
   Google Scholar
• Kosilova , A.G. , Mescheryakov , R.K. , 1985 , Technological Machining Handbook , 2 , Machinostroeniye, Moscow .
   Google Scholar
• ASME Research Committee on Metal Cutting Data and Bibliography, 1952 , Manual on Cutting Metals with Single-Point Tools , 2nd Ed., Amer. Soc. Mech. Engrs.
   Google Scholar
• ‘Coroplan’ process planning software and ‘Coroplan User Manual’, 1989, AB Sandvik Coromant , Sandvik Automation GmbH , Viernheim.
   Google Scholar
• Sandvik Coromant Catalogue, 1995 , Metal Working Products 94/95-Turning Tools, AB Sandvik Coromant.
   Google Scholar
• Titex Electronic Catalog v. 4.0 , 1995–1998 , D-60489 Frankfurt am Main.
   Google Scholar
• Titex Catalogue, 1998 , Titex Plus Precision Cutting Tools , TGunter & Co. GmbH , D-60489 Frankfurt am Main
   Google Scholar
• van Luttervelt . C A. , Childs , T. H. C. , Jawahir , I. S. , Klocke , F. and Venuvinod , P. K. , 1998 , Present Situation and Future Trends in Modelling of Machining Operations , CIRP Annals , 47/2 , pp. 587 – 626 .
   Google Scholar
• Jawahir , I. S , Balaji , A. K. and Stevenson , R. , (Editors), 1998 , Proc. CIRP Int. Workshop on Modelling of Machining Operations , Atlanta , Georgia .
   Google Scholar
• 2^nd CIRP International Workshop on Modelling of Machining Operations , 1999 , Nantes , France .
   Google Scholar
• Armarego , E. J. A. , Mathew , P. and Arsecularatne , J. (Editors), 2000 , 3^rd, CIRP International Workshop on Modelling Machining Operations , University of New South Wales, Sydney , Australia .
   Google Scholar
• Jawahir , I. S , Balaji , A. K. , Stevenson , R. and van Luttervelt , C. A. , 1997 , Towards Predictive Modelling and Optimisation of Machining Operations, MED-Vol. 6–2 , Manufacturing Science and Technology , 2 , Amer. Soc. Mech. Engrs., pp. 3 – 12 .
   Google Scholar
• Taylor , F. W. , 1907 , On the Art of Cutting Metals , Trans. Amer. Soc. Mech. Engrs. , 28 ( 1907 ), pp. 31 – 350 .
   Google Scholar
• Armarego , E. J. A. and Brown , R. H. , 1969 , The Machining of Metals , PrenticeHall Inc., New Jersey .
   Google Scholar
• Kals , H. J. J. and Hijinks , J. A. W. , 1978 , “ A Computer Aid in the Optimisation of Turning Conditions in Multi-Cuts Operations ”, CIRP Annals , 27 pp. 465 .
   Google Scholar
• Arrnarego , E. J. A. , Kee , P. K. and Smith , A. J. R. , 1986 , Computer-Aided Optimisation of Machining Conditions in Single Pass Turning Operations, 3rd International Conference on Manufacturing Engineering , I.E. Aust., Newcastle , pp. 36 – 43 .
   Google Scholar
• Armarego , E. J. A. , Chia , T. H. and Kee , P. K. , 1988 , A Development ComputerAided Optimisation Strategies for Multipass Turning Operations, 4th International Conference on Manufacturing Engineering , MECH 88, I.E. Aust., Brisbane , pp. 1 – 5 .
   Google Scholar
• Armarego , E. J. A. and Kee , P. K. , 1989 , An Analysis of Alternative Multipass Turning Optimisation Strategies for CAM Applications, 4th Int. Conf. Metal Cutting , Non Conventional Machining and their Automation, Beijing , China . p. 24 .
   Google Scholar
• Armarego , E. J. A. , Smith , A. J. R. and Wang , J. , 1994 , Computer-Aided Constrained Optimization Analyses and Strategies for Multipass Helical Tooth Milling Operations , CIRP Annals , 43/1 , pp. 437 – 442 .
   Google Scholar
• Ostafiev , D. , 1999 , Multiple Constraint Optimisation Analyses and Software for Selecting Machining Conditions in Rough Turning Operations , Ph.D. Thesis, University of Melbourne.
   Google Scholar
• Metcut Research Assoc. Inc., 1979 , ‘Machining Data Handbook’.
   Google Scholar
• M. E. Merchant , 1974 , Industry-Research Integration in Computer-Aided Manufacturing, Int. Conf. on Prod. Tech. , I.E. Aust., Melbourne .
   Google Scholar
• W. Eversheim , W. Konig , M. Weck , and T. Pfeifer , Tagunsband des AWK'84 , Aachener Werkzeugrnaschinen-Kolloquim , 1984 .
   Google Scholar
• E.J.A. Armarego , 1994, Machining Performance Prediction For Modem Manufacturing, 7th Int. Conf. Prod.lPrecision Engineering and 4th Int. Conf. High Tech. , Chiba , Japan , k52.
   Google Scholar
• J. F. Kahles , 1987 , Machinability Data Requirements for Advanced Machining Systems , CIRP Report, CIRP Annals , 36/2 , p. 523 .
   Google Scholar
• Tourret , R. , 1958 , Performance of Metal Cutting Tools , Bulterworthis Scientific Publications, London .
   Google Scholar
• Boston , O.W. , 1926 , The Elements of Metal Cutting, Bulletin Dep. Engng. Res. , University of Michigan, No. 5
   Google Scholar
• Boston , O. W. and Kraus , C. E. , 1936 , A Study of the Turning of Steel Employing a New-Type Three Component Dynamometer Trans. Amer. Soc. Mech. Engrs. , vol 58 , p. 47 .
   Google Scholar
• Boston , O. W. and Gilbert , W. W. , A Study of Cutting Fluids Applied to Turning of Monel Metal , Trans. Amer. Soc. Mech. Engrs. , vol 58 , p. 685 .
   Google Scholar
• Boston , O. W. , 1991 , Metal Processing , Wiley, N.Y.
   Google Scholar
• Kronenberg , M. , 1996 , Machining Science and Application , Pergamon Press, Oxford .
   Google Scholar
• Boston , O. W. Gilbert , W. W. and Kaiser , K. B. , 1937 , Power and Forces in milling S.A.E. 3150 Steel with Helical Mills , Trans. Amer. Soc. Mech. Engrs. , vol 59 , p. 545 .
   Google Scholar
• Boston , O. W. and Kraus , C. E. , 1938 , Elements of Milling - Part 2 , Trans. Amer. Soc. Mech. Engrs. , vol 56 , p. 358 .
   Google Scholar
• Boston , O. W. and Oxford C. J. , 1930 , Power Required to Drill Cast Iron and Steel , Trans. Amer. Soc. Mech. Engrs. , vol 52 , No. 3 .
   Google Scholar
• Boston , O. W. and Gilbert , W. W. , 1936 , The Torque and Thrust of Small Drills Operating in Various Metals , Trans. Amer. Soc. Mech. Engrs. , vol 58 , p. 79 .
   Google Scholar
• Galloway , D. F. and Norton I. S. , 1946 , Practical Drilling Tests, Research Department , Institution of Production Engineers, London .
   Google Scholar
• Galloway , D. F. , 1957 , Some Experiments on the Influence of Varioius Factors on Drill Performance , Trans. Amer. Soc. Mech. Engrs. , vol 79 , p. 191 .
   Google Scholar
• Mills , B. and Redford , A. H. , 1983 , Machinability of Engineering Materials , Applied Science Publishers, London and New York .
   Google Scholar
• Armarego , E. J. A. , 1993 , Material Removal Processes-An Intermediate Course, Department of Mechanical and Manufacturing Engineering , The University of Melbourne (ISBN, 0646 154265).
   Google Scholar
• Arshinov , V. and Alekseev , G. , 1976 (English Translation), Metal Cutting Theory and Cutting Tool Design , MIR Publishers, Moscow .
   Google Scholar
• Lorenz , G. , 1982 , Some Metallurgical Problems in Machining in the Light of Statistical Analysis, UNESCO-CIRP Seminar on Manufacturing Technology , Singapore , pp. 70 – 79 .
   Google Scholar
• Lorenz , G. , 1982 , Statistics Assist Solving Production Problems, UNESCO - CIRP Seminar on Manufacturing Technology , Singapore , pp. 245 – 255 .
   Google Scholar
• Armarego , E.J.A. , 1970 , Effect of Tool Form and Workpiece Geometry in Metal Cutting , Ph.D. Thesis, University of Melbourne.
   Google Scholar
• Armarego , E. J. A. , 1982 , Practical Implication of Classical thin Shear Zone Cutting Analyses, UNESCO-CIRP Seminar on Manufacturing Technology , Singapore , pp. 167 – 182 .
   Google Scholar
• Leslie , R.T. and Lorenz , G. , 1967, Comparison of Multiple Regressions in Machining Experiments, Advances in Machine Tool Design and Research , Oxford , Pergamon Press Ltd.
   Google Scholar
• Leslie , R. T. and Lorenz , G. , 1963–1964 , Tool-Life Exponents in the Light of Regression Analysis , CIRP Annals , 1211 , p. 226 .
   Google Scholar
• Wu , S. M. , 1964 , Tool-Life Testing by Response Surface Methodology: Parts 1 and 11, Trans. Amer. Soc. Mech. Engrs. , J. of Eng. for Ind. , 86 , 105 .
   Google Scholar
• ISO 3685, 1993 , Tool-life testing with single-point turning tools.
   Google Scholar
• Armarego , E. J. A. and Ostafiev , D. , 1998 , “ A Study of a Proprietary Computerised Technological Machining Performance Database ”, 8^th Int. Manuf. Conf. with China (IMCC'98) , Singapore , pp. 26 – 33 .
   Google Scholar
• Armarego , E. J. A. and Wong , S. W. Y. , 2000 , An Appraisal of a Drilling Performance Database within a Proprietary Machining Software Package, Research Report 2000/MPII, Manufacturing Science Group, Department of Mechanical and Manufacturing Engineering , University of Melbourne.
   Google Scholar
• Armarego , E. J. A. and Pramanik , D. , 1985 , An Analysis of Drill Life Data-A Comparison of Drill Surface Treatments, Part 1 and 11, Manuf. Processes Research Report 1985/MC/3, Manufacturing Science Group, Department of Mechanical and Manufacturing Engineering , The University of Melbourne.
   Google Scholar
• Tomas , P. and Smith , R. , 1986 , The Wear Failure of Titanium Nitride Coated Drills, 3^rd Int. Conf. on Manufacturing Engineering (ICME) , Institution of Engineers, Australia , Newcastle , pp. 49 – 53 .
   Google Scholar
• Armarego , E. J. A. , 1997 , “ Material Removal Processes-Twist Drills and Drilling Operations ”, Department of Mechanical and Manufacturing Engineering , The University of Melbourne, (ISBN, 0 646 31163 8).
   Google Scholar
• Armarego , E. J. A. , 2000 , The Unified-Generalized Mechanics of Cutting Approacha Step Towards a House of Predictive Performance Models for Machining Operations, Proc. 3^rd CIRP International Workshop on Modelling Machining Operations , University of New South Wales, Sydney .
   Google Scholar