ASSESSMENT OF MACHINING MODELS: PROGRESS REPORT

References

• Merchant , E. , 1998 , Proceedings of the CIRP International Workshop on Modeling of Machining Operations , Atlanta , GA , USA .
   Google Scholar
• Soons , H.A. , Yaniv , S.L. , 1995 , Precision in machining: research challenges, Gaithersburg , MD: National Institute of Standards and Technology, NISTIR 5628.
   Google Scholar
• Taylor , F. W. , 1907 , Trans. ASME , 28 . 31 .
   Google Scholar
• Koenigsburger , F. , 1964 , Design Principlesof Metal Cutting MachineTools , Peragamon, : Oxford .
   Google Scholar
• Machining Data Handbook , 3rd Edition, 1980 , Vol. 1& 2 , Metcut Reseach Associates Inc., Cinncinnatti , Ohio , USA .
   Google Scholar
• Shaw , M. C. , 1984 , Metal Cutting Principals , Oxford Press, Oxford , UK .
   Google Scholar
• Trent , 1991 , Metal Cutting , Butterworth-Heinemann, Oxford .
   Google Scholar
• Komanduri , R. , 1993 , Appl Mech Rev , 46 ( 3 ), 80 – 129 .
   Google Scholar
• Mallock , A. , 1881 , Proc. Royal Soc , ( Lon ), 33 : 127 – 139 .
   Google Scholar
• Piispanen , V. , 1937 , Teknillan Aiakakauslenti , 27 : 315 .
   Google Scholar
• Ernst , H. , 1938, Physics of Metal Cutting, Machining of Metals , ASM, 1–34.
   Google Scholar
• Ernst , H. , Merchant , M. E. , 1941 , Trans. ASME , 29 : 299 .
   Google Scholar
• Merchant , M. E. , 1945 , Trans. ASME , 66 : A65 – A71 .
   Google Scholar
• Merchant , M. E. , 1945 , J. App. Phys. , 16 : 267 .
   Google Scholar
• Merchant , M. E. , 1945 , J. App. Phys. , 16 : 318 .
   Google Scholar
• Ernst , H. , Merchant , M.E. , 1941 , Chip formation, friction and high quality machined surfaces , Surface Treatment of Metals , Vol. 29 , p. 299 .
   Google Scholar
• Merchant , M.E. , 1945 , Mechanics of the cutting process , Journal of Applied Physics , Vol. 16 , p. 267 – 318 .
   Web of Science ®Google Scholar
• Lee , E.H. , Schaffer , B.W. , 1951 , The theory of plasticity applied to a problem of machining , Journal of Applied Mechanics , Vol. 18 ( 4 ), p. 405 .
   Web of Science ®Google Scholar
• Rubenstein , C. , 1983 , The mechanics of continuous chip formation in oblique cutting in the absence of chip distortion, part 1-theory , International Journal of Machine Tool Design and Research , Vol. 23 , No. 1 , pp. 11 – 20 .
   Web of Science ®Google Scholar
• Lau , W. S. , Rubenstein , C. , 1983 , The mechanics of continuous chip formation in oblique cutting in the absence of chip distortion, part 2-comparison of experimental data with the deductions from theory , International Journal of Machine Tool Design and Research , Vol. 23 , No. 1 , pp. 21 – 37 .
   Web of Science ®Google Scholar
• Grzesik , W. , 1990 , The mechanics of continuous chip formation in oblique cutting with single-edged tool-part 1. theory , International Journal of Machine Tool Manufacturing , Vol. 30 , No. 3 , pp. 359 – 371 .
   Web of Science ®Google Scholar
• Grzesik , W. , 1990 , The mechanics of continuous chip formation in oblique cutting with single-edged tool-part 11. experimental verification of the theory , International Journal of Machine Tool Manufacturing , Vol. 30 , No. 3 , pp. 373 – 388 .
   Web of Science ®Google Scholar
• Palmer , W.B. , Oxley , P.L.B. , 1959 , Mechanics of metal cutting , Proceedings oflnstitute of Mechanical Engineers , Vol. 173 , p. 623 .
   Google Scholar
• Oxley , P.L.B. , 1961 , A strain hardening solution for the shear angle in orthogonal metal cutting , International Journal of Mechanical Sciences , Vol. 3 , p. 68 .
   Google Scholar
• Johnson , W. , 1962 , Some slip-line fields for swaging or expanding, indenting, extruding and machining with curved dies , International Journal of Mechanical Sciences , Vol. 4 , p. 323 .
   Google Scholar
• Oxley , P.L.B. , Hatton , A.P. , 1963 , Shear angle solution based on experimental shear zone and tool-chip interface stress distribution , International Journal of Mechanical Sciences , Vol. 5 , p. 41 .
   Google Scholar
• Oxley , P.L.B. , Welsh , M.J.M. , 1963 , Calculating the shear angle in orthogonal metal cutting from fundamental stress, strain, strain-rate properties of the work material, Proceedings 4th International Machine Tool Design and Research Conference. , Pergamon, Oxford , p. 73 .
   Google Scholar
• Usui , E. , Hoshi , K. , 1963 , Slip-line fields in metal cutting involving centered fan fields , International Research in Production Engineering ASME, p. 61 .
   Google Scholar
• Kudo , H. , 1965 , Some new slip-line solutions for two-dimensional steady-state machining , International Journal of Mechanical Sciences , Vol. 7 , p. 43 .
   Google Scholar
• Fenton , R.G. , Oxley , P.L.B. , 1968 , Mechanics of orthogonal machining: allowing for the effects of strain-rate and temperature on tool-chip friction , Proceedings of Institute of Mechanical Engineering. ,
   Google Scholar
• Dewhurst , P. , Collins , I.F. , 1973 , A matrix technique for constructing slip-line field solutions to a class of plane-strain plasticity problems , International Journal of Numerical Methods in Engineering , Vol. 7 , p. 357 .
   Google Scholar
• Dewhurst , P. , 1978, On the non-uniqueness of the machining process, Proceedings of Royal Society , London, Vol. A360, p. 587.
   Google Scholar
• Dewhurst , P. , 1979 , The effect of chip breaker constraints on mechanics of machining , Annals of CIRP , Vol. 28 , p. 1 – 5 .
   Google Scholar
• Martelloti , M.E. , 1941 , An analysis of the milling process , Trans. ASME , Vol. 63 , p. 667 .
   Google Scholar
• Martelloti , M.E , 1945 , An analysis of the milling process 11 : down milling , Trans. ASME , Vol. 67 , p. 233 .
   Google Scholar
• Koenigsberger , F. , Sabberwal , A.J.P. , 1960 , Chip section and cutting force during the milling operation , Anals of ClRP. ,
   Google Scholar
• Kline , W.A. , DeVor , R.E. , 1983 , The effect of runout on cutting geometry and forces in cnd milling , International Journal of Machine Tool Design and Research , Vol 23 , No. 2/3 , p. 123 – 140 .
   Web of Science ®Google Scholar
• Nakayama , K. , Arai , M. , Takei , K. , 1983 , Semi-empirical equations for three components of resultant cutting force , Anals of CIRP , Vol. 30 , No. 1 , p. 33 .
   Google Scholar
• Fu , H.J. , DeVor , R.E. , Kapoor , S.G. , 1984 , A mechanistic model for the prediction of the force system in face milling operations , ASME Journal of Engineering for Industry , Vol. 106 , p. 81 – 88 .
   Web of Science ®Google Scholar
• Subramani , G.R. , Suvada , R. , Kapoor , S.G. , DeVor , R.E. , Meingast , W. , 1987 , A model for the prediction of force system for cylinder boring process , Proc. NAMRC , 15 , pp. 439 – 446 .
   Google Scholar
• Smith , S. and Tlusty , I. , 1988 , Modeling and the simulation ofthe milling process, ASME , PED-Vol. 33 , Proc. Winter Annual Meeting, pp. 17 – 26 .
   Google Scholar
• Chandrasekharan , V. , Kapoor , S.G. , DeVor , R.E. , 1993 , A mechanistic approach to predicting the cutting forces in drilling: with application to fiber-reinforced composite materials, ASME. MD-Vol. 45/ PED-Vol. 66, Proc. Machining of Advanced Composites , pp. 33 – 51 .
   Google Scholar
• Endres , W.J. , DeVor , R.E. , Kapoor , S.G. , 1993 , A dual-mechanism approach to the prediction of machining forces, Parts 1 and 2, Proc., ASME Sym. on Modeling , Monitoring and Control Issues in Manufac. , PED-Vol. 64 , pp. 563 – 593 .
   Google Scholar
• Jawahir , I. S. , 1986 , Ph.D. Thesis, University of New South Whales.
   Google Scholar
• Amarego , E.J.A. , Brown , R.H. , 1969 , The Machining of Metals , Prentice Hall, Engelwood Cliffs s :New Jersey.
   Google Scholar
• Budak , E. , Altintas , Y. , Amarego , E.J.A. , 1996 , J. Man. Sci. Eng. , 118 : 216 – 224 .
   Web of Science ®Google Scholar
• Amarego , E.J.A. , Uthaichaya , M. , Journal of Engineering Production , 1 ( 1 ): 1 – 18 .
   Web of Science ®Google Scholar
• Okushima , K. , Kakino , Y. , 1971 , The residual stress produced by metal cutting , Annals of CIRP , Vol. 20 ( 1 ), p. 13 .
   Google Scholar
• Klamecki , B.E. , 1973 , Incipient chip formation in metal cutting-a three dimension finite element analysis , Ph.D. Dissertation, University of Illinois at Urbana-Champaign.
   Google Scholar
• Tay , A.O. , Stevenson , M.G. , Davis , G.D.V. , 1974 , Using finite element method to determine the temperature distribution in orthogonal machining , Proceedings of Institute of Mechanical Engineers , Vol. 188 , p. 627 .
   Google Scholar
• Stevenson , M.G. , Wright , P.K. , Chow , J.G. , 1983 , “ Further developments in applying finite element technique to the calculation of temperature distributions in machining and comparisons with experiment ,” Journal of Industry , Vol. 105 , p. 149 .
   Web of Science ®Google Scholar
• Lajczok , M.R. , 1980 , A study of some aspects of metal machining using finite element method , PhD Dissertation, North Carolina State University.
   Google Scholar
• Natarajan , R. , Jeelani , S. , 1983, Residual stresses in machining using finite element method, Computers in Engineering, Computer Software and Applications , Vol. 3, p.79.
   Google Scholar
• Shirakashi , T. , Usui , E. , 1974 , Simulation of orthogonal cutting mechanism, Proceedings of International Conference of Production Engineering , Tokyo , p. 535 .
   Google Scholar
• Usui , E. , Shirakashi , T. , 1982 , Mechanics of machining from descriptive to predictive theory, On the Art of Cutting Metals-75 Years Later , ASME Publication PED, Vol. 7 , p. 13 .
   Google Scholar
• Strenkowski , J.S. , Carroll III , J.T. , 1986 , An orthogonal metal cutting model based on an Eulerian finite element method, Manufacturing Processes , Machines and Systems , Proceedings of the 13th NSF Conference on Production Research and Technology.
   Google Scholar
• Carroll III , J. T. , 1986 , A numerical and experimental study of single point diamond machining , PhD Thesis, North Carolina State University.
   Google Scholar
• Carroll III , J.T. , Strenkowski , J.S. , 1988 , Finite Element Models of Orthogonal Cutting with Application to Single Point Diamond Turning , International Journal of Mechanical Sciences , Vol. 30 , p. 899 – 920 .
   Web of Science ®Google Scholar
• Marusich , T. D. , Ortiz , M. , 1995 , Int J. Numer. Methods Eng. , 38 : 3675 .
   Google Scholar
• Ceretti , E. , Fallbohrner , P. , Wu , W.T. , Altan , T. , Int. J. Mat. Proc. Tech. , 59 : 169 .
   Google Scholar
• Maekawa , K. , 1999 , Application of 3D Machining Modeling to Cutting Tool Design, Proceedings of the 11^nd CIRP Int'1 Workshop on Modeling of Machining Operations , Nantes , France .
   Google Scholar
• Ceretti , E. , 1999 , Numerical Study of Segmented Chop Formation in Orthogonal Cutting, Proceedings of the 11^nd CIRP Int'l Workshop on Modeling of Machining Operations , Nantes , France .
   Google Scholar
• Wayne , S.F. , Zimmerman , e. , O'Niel , D.A. , 1993 , Aspects of advanced cutting tool and chip-flow modeling, Proceedings of the 13th International Plansee Seminar , Eds. H. Bildstein and R. Eck , Metallwerk Plansee, Reutte Vol . 2 , p. 64 .
   Google Scholar
• Childs , T. , 1997 , Material Property requirements for modeling metal machining , J. Phys. 1V France 7 Colloque C3, suppl. Au J. Phys. 111 .,
   Google Scholar
• Camacho , G. , Marusich , T. , Ortiz , M. , 1993 , Adaptive meshing methods for the analysis of unconstrained plastic flow , Advanced Computational Methods for Material Modeling , Eds. Benson , D. J. and Asaro , R. J. , ASME AMD -Vol. l80 / PVPVol.268, pp. 71 – 83 .
   Google Scholar
• Lin , Z.e. , Chu , K.T. , Pan , W.e. , 1994 , A study of the stress, strain and temperature distributions of a machined workpiece using a thermo-elastic-plastic coupled model , Journal of Materials Processing Technology , Vol. 41 , pp. 291 – 310 .
   Web of Science ®Google Scholar
• Strenkowski , J.S. , Moon , K.J. , 1990 , Finite Element Prediction of Chip Geometry and Tool/Workpiece Temperature Distributions in Orthogonal Cutting , ASME Journal of Engineering for Industry , Vol. 112 , p. 313 – 318 .
   Web of Science ®Google Scholar
• Moon , K.J. , 1988 , A thermo-viscoplastic model of orthogonal cutting including chip geometry and temperature prediction , Ph.D. Thesis, North Carolina State University.
   Google Scholar
• Strenkowski , J.S. , Moon , K.J. , 1989 , A thermo-viscoplastic model of the cutting process including chip geometry and temperature prediction , Advances in Manufacturing Systems Integration and Processes , 15th Conference on Production Research and Technology.
   Google Scholar
• Hsu , J.M. , 1990, Three-dimensional finite element modeling of metal cutting , Ph.D. Thesis, North Carolina State University.
   Google Scholar
• Chern , S.Y. , 1991 , An improved finite element model of orthogonal cutting with special emphasis on a separate shear zone model , Ph.D. Thesis, North Carolina State University.
   Google Scholar
• Hsu , H.C. , 1992 , An elasto-viscoplastic finite element model of orthogonal metal cutting for residual stress prediction , Ph.D. Thesis, North Carolina State University.
   Google Scholar
• Chien , W.T. , 1992 , A numerical and experimental investigation of the sticking and sliding contact regions at the chip-tool interface in machining Aluminum 6061-T6 , Ph.D. Thesis, North Carolina State University.
   Google Scholar
• Yang , J.A. , 1992 , A predictive model of chip breaking for groove-type tools in orthogonal machining of AISI 1020 steel , Ph.D. Thesis, North Carolina State University.
   Google Scholar
• Athavale , S.M. , 1994 , A damage-based model for predicting chip breakabiJity for obstruction and groove tools , Ph.D. Thesis, North Carolina State University.
   Google Scholar
• Liu , W.K. , Chang , H. , Chen , J.S. , Belytschko , 1988 , “ Arbitrary Lagrangian-Eulerian Petrov-Galerkin Finite Elements for Nonlinear Continua ,” Computer Methods in Applied Mechanics and Engineering , Vol. 68 , pp. 259 – 310 .
   Web of Science ®Google Scholar
• Movahhedy , M. , Gadala , M.S. , Altintas , Y. , 2000 , “ Simulation of the Orthogonal Metal Cutting Process using an Arbitrary Lagrangian-Eulerian Finite Elemend Method ,” J. of Materials Processing Technology , Vol. 103 , pp. 267 – 275 .
   Web of Science ®Google Scholar
• Herbert , E.G. , 1926 , The Measurement of Cutting Temperatures , Proceedings of the Institute of Mechanical Engineers , pp. 289 – 329 .
   Google Scholar
• Boston , O.W. , Gilbert , W.W. , 1935 , Cutting Temperatures Developed by SinglePoint Turning Tools , Trans. of the ASM , vol. 23 , pp. 703 – 726 .
   Google Scholar
• Trigger , K.J. , 1948 , Progress Report No. 1 on Tool-Chip Interface Temperatures , Transactions of the ASME , Vol. 70 , pp. 91 – 98 .
   Google Scholar
• Stephenson , D.A. , 1993 , Tool-Work Thermocouple Temperature MeasurementsTheory and Implementation Issues , ASME Journal of Engineering for Industry , Vol. 115 , pp. 432 – 437 .
   Web of Science ®Google Scholar
• Taylor , B.N. , and Kuyatt , C.E. , 1994 , Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results. , National Institute of Standards and Technology Technical Note (TN) 1297 .
   Google Scholar
• Nondestructive Testing Handbook, 1991 , 2nd Edition, Volume 7 , Ultrasonic Testing , American Society for Nondestructive Testing.
   Google Scholar
• Official contribution of the National Institute of Standards and Technology, not subject to copyright in the United States.
   Google Scholar