References
- A. R. Machado and J. Wallbank , “ Machining of Titanium ands Its Alloys–A Review ,” Journal of Engineering Manufacture , 204 ( 1990 ) 53 – 60 .
- N. Richards and D. Aspinwall , “ Use of Ceramic Tools for Machining Nickel Based Alloys ,” InternationalJournal of Machine Tools and Manufacture , 29 ( 4 ) ( 1989 ) 575 – 588 .
- I. S. Jawahir and C. A. van Luttervelt, “ Recent Developments in Chip Control Research and Applications ,” Annals of CIRP , 42 ( 2 ) ( 1993 ) 659 – 693 .
- X. D. Fang and I. S. Jawahir , “ An Expert System Based on a Fuzzy Mathematical Model for Chip Breakability Assessments in Automated Machining, ” Proc. of the 2nd International ASME Conf , Vol. IV , Atlanta , USA , March 1990 , pp. 31 – 37 .
- Y. Yao , D. Jamieson , I. S. Jawahir , and X. D. Fang , “ Computer Animation of Chip Flow and Chip Curl in an Expert Process Planning System for Metal Machining ,” Transactions of NAMRI/SME , 1990 , pp. 161 – 166 .
- M. Rahman , K. H. W. Seah , X. P. Li , and X. D. Zhang , “ A Three-Dimensional Model of Chip Flow, Curl and Chip Breaking under the Concept of Equivalent Parameters ,” International Journal of Machine Tools and Manufacture , 35 ( 7 ) ( 1995 ) 1015 – 1031 .
- M. Takatsuto , “ Chip Disposal Systems in Intermittently Decelerated Feed ,” Bulletin of the Japan Society of Precision Engineering , 22 ( 2 ) ( 1988 ) 109 – 114 .
- P. K. Venuvinod , and A. Djordjevich , “ Towards Active Chip Control ,” Annals of CIRP , 45 ( 1 ) ( 1996 ) 83 – 86 .
- A. G. Ringler , “ Put the BREAK on Chips with High Velocity Coolant System ,” Cutting Tool Engineering , October , 1988 , 26 – 30 .
- A. R. Machado , “ Machining of Ti6A14V and Inconel 901 with a High Pressure Coolant System, ” PhD Thesis, University of Warwick , UK , September , 1990 .
- E. O. Ezugwu , A. R. Machado , I. R. Pashby , and J. Wallbank , “ The Effect of High Pressure Coolant Supply when Machining a Heat Resistant Nickel-Based Superalloy ,” Lubrication Engineering , 47 ( 9 ) ( 1991 ) 751 – 757 .
- R. Komanduri and B. F. von Turkovich, “ New Observations on the Mechanisms of Chip Formation when Machining Titanium Alloys ,” Wear , 69 ( 1981 ) 179 – 188 .
- P. A. Dearnley , and A. N. Grearson , “Evaluation of Principal Wear Mechanisms of Cemented Carbides and Ceramics Used for Machining Titanium Alloy IMI-318,” Materials Science and Technology , 2 (1986) 47–58.
- P. D. Hartung , and B. M. Kramer , “ Tool Wear in Titanium Machining ,” Annals ofCIRP , 31 ( 1 ) ( 1982 ) 75 – 79 .
- A. R. Machado , and J. Wallbank , “ The Effects of a High Pressure Coolant Jet on Machining ,” Journal of Engineering Manufacture , 208 ( 1994 ) 29 – 38 .
- M. C. Shaw , A. L. Thurman , and H. J. Alhgreen , “ Plasticity Problem Involving Plane Strain and Plane Stress Simultaneously: Groove Formation in the Machining of High Temperature Alloys ,” Journal of Engineering for Industry , (May) ( 1966 ) 142 – 146 .