A NEW CONCEPT FOR DECOUPLING THE CUTTING FORCES DUE TO TOOL FLANK WEAR AND CHIP FORMATION IN HARD TURNING

References

• R. Snoeys , M. Maris , and B. J. Peters . “ Thermally-induced damaging in grinding ,” Annals of CIRP , 27 ( 2 ) ( 1978 ) 571 – 581 .
   Google Scholar
• M. C. Shaw and A. Vyas , “ Heat-affected zones in grinding steel. ” Annals of CIRP , 43 ( 1 ) ( 1994 ) 279 – 282 .
   Google Scholar
• W. Konig , M. Klinger , and R. Link , “ Machining hard materials with geometrically defined cutting edges: Field of applications and limitations. ” Annals of CIRP , 39 ( 2 ) ( 1990 ) 61 – 64 .
   Google Scholar
• C. R. Liu , and S. Mittal , “ Single-step superfinish hard machining: Feasibility and feasible cutting conditions. ” Robotics & Computer-Integrated Manufacturing , 12 ( 1 ) ( 1996 ) 15 – 27 .
   Web of Science ®Google Scholar
• C. R. Liu , and S. Mittal , “ Single-step superfinishing using hard machining resulting in superior surface integrity. ” Journal of Manufacturing Systems , 14 ( 2 ) ( 1995 ) 129 – 133 .
   Web of Science ®Google Scholar
• W. Konig , R. Komanduri , H. K. Tonshoff , and G. Ackershott , “ Machining of hard materials. ” Annals of CIRP , 33 ( 2 ) ( 1984 ) 417 – 427 .
   Google Scholar
• K. Nakayama , M. Arai , and T. Kanda , “ Machining characteristics of hard materials. ” Annals of CIRP , 37 ( 1 ) ( 1988 ) 89 – 92 .
   Google Scholar
• M. Ogata , “ Einsatz von pcbn-werkzeugen in der production. ” VDI Berichte , 762 ( 1989 ) 271 – 279 .
   Google Scholar
• T. I. El . Wardany, M. A. Elbestawi , and M. H. Attia , Surface Finish in Turning of Hardened Steel , ASME Vol. PED 62, ( 1992 ) 141 – 159 .
   Google Scholar
• W. Konig , A. Berktold , and K. F. Koch , “ Turning versus grinding a comparison of surface integrity aspects and attainable accuracies. ” Annals of CIRP , 42 ( 1 ) ( 1993 ) 39 – 43 .
   Google Scholar
• H. K. Tonshoff , D. Brandt , and H. G. Wobker , “ Potential and limitation of hard turning. ” 1st International Machining and Grinding Conference , Dearborn, Michigan , Sept. ( 1995 a) 965 – 978 .
   Google Scholar
• H. K. Tonshoff , H. G. Wobker , and D. Brandt , “ Tribological aspects of hard turning with ceramic tools. ” Journal of the Society of Tribologists and Lubrication Engineers , 51 ( 2 ) ( 1995 b) 163 – 168 .
   Google Scholar
• J. A. Bailey , S. Jeelani , and S. E. Becker , “ Surface integrity in machining aisi 4340 steel. ” Journal of Engineering for Industry , ( 1976 ) August 999 – 1007 .
   Web of Science ®Google Scholar
• E. G. Loewen , and M. C. Shaw , “ On the analysis of cutting-tool temperatures. ” Transactions of the ASME , ( 1954 ) Feb. 217 – 231 .
   Google Scholar
• A. C. Rapier , “ A theoretical investigation of the temperature distribution in the metal cutting process. ” Brit J. Appl. Phys. , 5 ( 11 ) ( 1954 ) 400 – 405 .
   Google Scholar
• A. O. Tay , M. G. Stevenson , and G. DeVahlDavis , “ Using the finite element method to determine temperature distributions in orthogonal machining. ” Proc. Instn. Mech. Engrs. , 188 ( 55/74 ) ( 1974 ) 627 – 638 .
   Google Scholar
• A. O. Tay , M. G. Stevenson , G. DeVahlDavis , and P. K. O. Oxley , “ A numerical method for calculating temperature distributions in machining, from force and shear angle measurement. ” International Journal of Machine Tool Design and Research , 16 ( 1976 ) 335 – 349 .
   Google Scholar
• M. G. Stevenson , P. K. Wright , and J. G. Chow , “ Further developments in applying the finite element method to the calculation of temperature distributions in machining and comparisons with experiment. ” Journal of Engineering for Industry , 105 ( 1983 ) 149 – 154 .
   Web of Science ®Google Scholar
• T. H. C. Childs , K. Maekawa , and P. Maulik , “ Effects of coolants on temperature distribution in metal machining. ” Materials Science and Technology , 4 Nov. ( 1988 ) 1006 – 1019 .
   Web of Science ®Google Scholar
• J. S. Strenkowski and K. J. Moon , “ Finite element prediction of chip geometry and tool/workpiece temperature distributions in orthogonal metal cutting. ” Journal of Engineering for Industry , 112 ( 1990 ) 313 – 318 .
   Web of Science ®Google Scholar
• B. T. Chao and K. J. Trigger , “ Temperature distribution at tool-chip and tool-work interface in metal cutting. ” Transactions of the ASME , ( 1958 ) Feb. 311 – 320 .
   Google Scholar
• P. D. Muraka , G. Barrow , and S. Hinduja , “ Influence of the process variables on the temperature distribution in orthogonal machining using the finite element method. ” International Journal of Mechanical Sciences , 21 ( 1979 ) 445 – 456 .
   Web of Science ®Google Scholar
• X. Li , E. M. Kopalinsky , and P. L. B. Oxley , “ A numerical method for determining temperature distributions in machining with coolant. Part 1: Modeling the process. ” Proc. Instn. Mech. Engrs. , 209 ( 1995 ) 33 – 43 .
   Web of Science ®Google Scholar
• Z. C. Lin , and W. C. Pan , “ A thermoelastic-plastic large deformation model for orthogonal cutting with tool flank wear. Part I: Computation procedures. ” International Journal of Mechanical Sciences , 35 ( 10 ) ( 1993 ) 829 – 840 .
   Web of Science ®Google Scholar
• G. Boothroyd , J. M. Eagle , and A. W. J. Chisholm , “ Effect of tool flank wear on the temperature generated during metal cutting. ” Proc. of the MTDR , ( 1967 ) 667 – 680 .
   Google Scholar
• N. N. Zorev , Metal Cutting Mechanics. , Pergamon Press, New York ( 1966 ).
   Google Scholar
• C. R. Liu and M. M. Barash , “ The mechanical state of the sublayer of a surface generated by chip-removal process. Part 2: Cutting with a tool with flank wear. ” Journal of Engineering for Industry , ( 1976 ) Nov. 1203 – 1208 .
   Google Scholar
• M. E. Merchant , “ Mechanics of the metal cutting process. ” Journal of Applied Physics , 16 ( 6 ) ( 1945 ) 318 – 324 .
   Web of Science ®Google Scholar
• K. Nakayama , “ The formation of saw-toothed chip in metal cutting. ” Proc. of the International Conference on Production Engineering , ( 1974 ) Tokyo , 572 – 577 .
   Google Scholar
• R. Komanduri , “ Some clarifications on the mechanics of chip formation when machining titanium alloys. ” Wear , 76 ( 1982 ) 15 – 34 .
   Web of Science ®Google Scholar
• M. A. Davis , Y. Chou , and C. J. Evans , “ On chip morphology, tool wear and cutting mechanics in finish hard turning. ” Annals of CIRP , 45 ( 1 ) ( 1996 ) 77 – 82 .
   Google Scholar
• M. C. Shaw and A. Vyas , “ Chip formation in the machining of hardened steel. ” Annals of CIRP , 41 ( 1 ) ( 1993 ) 29 – 33 .
   Google Scholar
• J.C. Jaeger , “ Moving sources of heat and the temperature at sliding contacts. ” J. Proc. Roy. Soc , 76 New South Wales ( 1942 ) 203 – 224 .
   Google Scholar
• J. Orlich , “ The austenization process during rapid heating and impulse heating of steel. ” Traitment Therm. , 90 ( 1974 ) 69 – 75 .
   Google Scholar
• M. A. Elbestawi , A. K. Srivastava , and T. I. El-Wardany , “ A model for chip formation during machining of hardened steel. ” Annals of CIRP , 45 ( 1 ) ( 1996 ) 71 – 76 .
   Google Scholar