1,927
Views
29
CrossRef citations to date
0
Altmetric
Technical Papers

Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies

Pages 1288-1298 | Received 12 Feb 2014, Accepted 02 Jul 2014, Published online: 20 Oct 2014

References

  • Agency for Toxic Substances and Disease Registry. 1992. Toxicological profile for antimony and compounds. Atlanta, GA: Agency for Toxic Substances and Disease Registry.
  • Alvarez-Ayuso, E., X. Querol, F. Plana, A. Alastuey, N. Moreno, M. Izquierdo, O. Font, T. Moreno, S. Diez, E. Vazquez, and M. Barra. 2008. Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes. J. Hazard. Mater. 154(1–3):175–83. doi:10.1016/j.jhazmat.2007.10.008
  • Anderson, C.G. 2012. The metallurgy of antimony. Chemie Der Erde—Geochemistry 72:3–8. doi:10.1016/j.chemer.2012.04.001
  • ASTM. 2007. ASTM standard C109/C109M-07, 2007. Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens). ASTM International, West Conshohocken, PA. doi:10.1520/C0109_C0109M, http://www.astm.org.
  • ASTM. 2011. ASTM standard C204-11, 2011. Standard test methods for fineness of hydraulic cement by air-permeability apparatus. ASTM International, West Conshohocken, PA. doi:10.1520/C0204-11, http://www.astm.org.
  • ASTM. 2012. ASTM standard C618-12a, 2012. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken, PA. doi:10.1520/C0618-12A, http://www.astm.org.
  • Carlin, J.F. 2012. Antimony. In U.S. geological survey. USGS Minerals Information. http://minerals.usgs.gov/minerals/pubs/commodity/antimony/mcs-2012-antim.pdf (accessed July 1, 2014).
  • Chen, Q.Y., M. Tyrer, C.D. Hills, X.M. Yang, and P. Carey. 2009. Immobilisation of heavy metal in cement-based solidification/stabilisation: A review. Waste Manage. 29(1): 390–403. doi:10.1016/j.wasman.2008.01.019
  • Chuanyong, J., G.P. Korfiatis, and X. Meng. 2003. Immobilization mechanisms of arsenate in iron hydroxide sludge stabilized with cement. Environ. Sci. Technol. 37:5050–56.
  • Conner, J.R. 1990. Chemical fixation and solidification of hazardous wastes. New York, NY: Van Nostrand Reinhold.
  • Cornelis, G., T. Van Gerven, and C. Vandecasteele. 2006. Antimony leaching from uncarbonated and carbonated MSWI bottom ash. J. Hazard. Mater. 137(3): 1284–92. doi:10.1016/j.jhazmat.2006.04.048
  • Cornelis, G., C.A. Johnson, T. Van Gerven, and C. Vandecasteele. 2008. Leaching mechanisms of oxyanionic metalloid and metal species in alkaline solid wastes: A review. Appl. Geochem. 23(5): 955–76. doi:10.1016/j.apgeochem.2008.02.001
  • Cornelis, G., T. Van Gerven, and C. Vandecasteele. 2012. Antimony leaching from MSWI bottom ash: Modelling of the effect of pH and carbonation. Waste Manage. 32(2): 278–86. doi:10.1016/j.wasman.2011.09.018
  • Davidovits, J. 1991. Geopolymers—Inorganic polymeric new materials. J. Thermal Anal. 37(8): 1633–56. doi:10.1007/Bf01912193
  • Davidovits, J. 1999. Geopolymeric reactions in the economic future of cements and concretes: World-wide mitigation of carbondioxide emissions. In Proceedings of the 2nd International Conference on Geopolymer ‘99, ed. J. Davidovits, R. Davidovits, and C. James, pp. 111–121. Saint Quentin, France.
  • Diaz, E. I., E. N. Allouche, and S. Eklund. 2010. Factors affecting the suitability of fly ash as source material for geopolymers. Fuel 89(5): 992–96. doi:10.1016/j.fuel.2009.09.012
  • Dutre, V., and C. Vandecasteele. 1995. Solidification stabilization of hazardous arsenic-containing waste from a copper refining process. J. Hazard. Mater. 40(1): 55–68. doi:10.1016/0304-3894(94)00080-Z
  • Duxon, P., A. Fernandez-Jimenez, J.L. Provis, G.C. Lukey, A. Palomo, and J.S.J. Van Deventer. 2007. Geopolymer technology: the current state of the art. J. Mater. Sci. 42:2917–33. doi:10.1007/s10853-006-0637-z
  • EN Standard Store. 2002. EN 12457-4, 2002. Characterization of waste—Leaching—Compliance test for leaching of granular waste materials and sludges—Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction). http://www.en-standard.eu.
  • European Community. 2006. Directive 2006/21/EC and amending Directive 2004/35/EC, Directive 2006/21/EC of the European Parliament and of the Council of 15 March 2006 on the management of waste from extractive industries and amending Directive 2004/35/EC. Off. J. Eur. Union L102/15, 11.4.2006.
  • European Community. 2008. Directive 2008/98/EC, Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste. Off. J. Eur. Union L 312/3, 22.11.2008.
  • European Waste Catalogue. 2002. European Waste Catalogue (EWC) And Hazardous Waste List 2002, Environmental Protection Agency, ISBN:1-84095-083-8, 49 p.Ireland.
  • Fernandez-Jimenez, A., and A. Palomo. 2003. Characterisation of fly ashes. Potential reactivity as alkaline cements. Fuel 82(18): 2259–65. doi:10.1016/S0016-2361(03)00194-7
  • Filella, M., N. Belzile, and Y.W. Chen. 2002. Antimony in the environment: A review focused on natural waters I. Occurrence. Earth-Science Rev. 57(1–2): 125–76. doi:10.1016/S0012-8252(01)00070-8
  • Glasser, F.P. 1997. Fundamental aspects of cement solidification and stabilisation. J. Hazard. Mater. 52(2–3): 151–70. doi:10.1016/S0304-3894(96)01805-5
  • Hale, B., L. Evans, and R. Lambert. 2012. Effects of cement or lime on Cd, Co, Cu, Ni, Pb, Sb and Zn mobility in field-contaminated and aged soils. J. Hazard. Mater. 199:119–27. doi:10.1016/j.jhazmat.2011.10.065
  • Khale, D., and R. Chaudhary. 2007. Mechanism of geopolymerization and factors influencing its development: a review. J. Mater. Sci. 42(3): 729–46. doi:10.1007/s10853-006-0401-4
  • Klein, J., S. Dorge, G. Trouve, D. Venditti, and S. Durecu. 2009. Behaviour of antimony during thermal treatment of Sb-rich halogenated waste. J. Hazard. Mater. 166(2–3): 585–93. doi:10.1016/j.jhazmat.2008.12.006
  • Komnitsas, K., and D. Zaharaki. 2007. Geopolymerisation: A review and prospects for the minerals industry. Minerals Eng. 20(14): 1261–77. doi:10.1016/j.mineng.2007.07.011
  • Mobbs, P.M.2013. The Mineral Industry of Turkey. In 2011 Minerals Yearbook, U.S. Geological Survey, 1–15. http://minerals.usgs.gov/minerals/pubs/country/2011/myb3-2011-tu.pdf (accessed July 1, 2014).
  • Moon, D.H., D. Dimitris, and N. Menounou. 2004. Arsenic immobilization by calcium-arsenic precipitates in lime treated soils. Sci. Total Environ. 330:171–85. doi:10.1016/j.scitotenv.2004.03.016
  • Paria, S., and P.K. Yuet. 2006. Solidification-stabilization of organic and inorganic contaminants using Portland cement: literature review. Environ. Rev. 14(4): 217–55. doi:10.1139/A06-004
  • Pereira, C.F., Y. Luna, X. Querol, D. Antenucci, and J. Vale. 2009. Waste stabilization/solidification of an electric arc furnace dust using fly ash-based geopolymers. Fuel 88(7): 1185–93. doi:10.1016/j.fuel.2008.01.021
  • Roman-Ross, G., G.J. Cuello, X. Turillas, A. Fernandez-Martinez, and L. Charlet. 2006. Arsenite sorption and co-precipitation with calcite. Chem. Geol. 233:328–36. doi:10.1016/j.chemgeo.2006.04.007
  • Salihoglu, G., and V. Pinarli. 2008. Steel foundry electric arc furnace dust management: Stabilization by using lime and Portland cement. J. Hazard. Mater. 153(3): 1110–16. doi:10.1016/j.jhazmat.2007.09.066
  • Singh, T.S., and K.K. Pant. 2006. Solidification/stabilization of arsenic containing solid wastes using Portland cement, fly ash and polymeric materials. J. Hazard. Mater. 131(1–3): 29–36. doi:10.1016/j.jhazmat.2005.06.046
  • Van Jaarsveld, J.G.S., J.S.J. van Deventer, and G.C. Lukey. 2003. The characterisation of source materials in fly ash-based geopolymers. Mater. Lett. 57(7): 1272–80. doi:10.1016/S0167-577x(02)00971-0
  • VanJaarsveld, J.G.S., J.S.J. VanDeventer, and L. Lorenzen. 1997. The potential use of geopolymeric materials to immobilise toxic metals. 1. Theory and applications. Minerals Eng. 10(7): 659–69. doi:10.1016/S0892-6875(97)00046-0
  • Vandecasteele, C., V. Dutre, D., Geysen, and G. Wauters. 2002. Solidification/stabilisation of arsenic bearing fly ash from the metallurgical industry. Immobilisation mechanism of arsenic. Waste Manage. 22:143–46. doi:10.1016/S0956-053X(01)00062-9
  • Zhang, L.Y., S. Ahmari, and J.H. Zhang. 2011. Synthesis and characterization of fly ash modified mine tailings-based geopolymers. Construct. Build. Mater. 25(9): 3773–81. doi:10.1016/j.conbuildmat.2011.04.005
  • Zheng, L., W. Wang, and Y. Shi. 2010. The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly-ash based geopolymer. Chemosphere 79:665–71. doi:10.1016/j.chemosphere.2010.02.018

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.