References
- Annamalai, M., and K. Gurumurthy. 2019. Enhanced bioleaching of copper from circuit boards of computer waste by acidithiobacillus ferrooxidans. Environ. Chem. Lett. 0123456789. doi:https://doi.org/10.1007/s10311-019-00911-y.
- Arnold, J. C., T. Watson, S. Alston, M. Carnie, and C. Glover. 2010. The use of FTIR mapping to assess phase distribution in mixed and recycled WEEE plastics. Polym. Test. 29 (4):459–70. doi:https://doi.org/10.1016/j.polymertesting.2010.02.006.
- Arshadi, M., S. Yaghmaei, and S. M. Mousavi. 2018. Content evaluation of different waste PCBs to enhance basic metals recycling. Resour. Conserv. Recycl. 139 (September):298–306. doi:https://doi.org/10.1016/j.resconrec.2018.08.013.
- Arshadi, M., and S. M. Mousavi. 2015. Multi-Objective optimization of heavy metals bioleaching from discarded mobile phone PCBs: Simultaneous Cu and Ni recovery using acidithiobacillus ferrooxidans. Separation and Purification Technology 147:210–19. doi:https://doi.org/10.1016/j.seppur.2015.04.020.
- ASMT. 1996. ASTM D-2015-Standard test method for gross calorific value of coal and coke by the adiabatic bomb calorimeter. West Conshohocken, PA, USA: ASTM.
- ASTM. 1988a. ASTM D-3174-93 - Standard test method for ash in the analysis sample of coal and coke from coal, Vol. 5. West Conshohocken, PA: Annual Book of ASTM Standards.
- ASTM. 1988b. ASTM D-3175-89a - Standard test method for volatile matter in the analysis sample of coal and coke, Vol. 5. West Conshohocken, PA: Annual Book of ASTM Standards.
- ASTM. 1998. ASTM D 3173-87 - Standard test method for moisture in the analysis sample of coal and coke, Vol. 5. West Conshohocken, PA: Annual Book of ASTM Standards, Section.
- Bakas, I. 2016. Critical metals in discarded electronics: Mapping recycling potentials from selected waste electronics in the Nordic Region. Copenhagen K, Denmark: Nordic Council of Ministers.
- Baldé, C. P., F. Wang, R. Kuehr, and J. Huisman. 2015. The global E-waste monitor 2014. United Nations University, IAS – SCYCLE, Bonn, Germany. Bonn, Germany: United Nations University, IAS – SCYCLE.
- Balde, C. P., V. Forti, V. Gray, R. Kuehr, and P. Stegmann. 2017. The global E-waste monitor 2017. United Nations University. doi:https://doi.org/10.1016/j.proci.2014.05.148.
- Bizzo, W. A., R. A. Figueiredo, and V. F. De Andrade. 2014. Characterization of printed circuit boards for metal and energy recovery after milling and mechanical separation. Materials 7 (6):4555–66. doi:https://doi.org/10.3390/ma7064555.
- Blériot, J., and C. Johnson. 2013. A new dynamic effective business in a circular economy. Isle of Wight, UK: Ellen MacArthur Foundation Publishing.
- Burlakovs, J., Y. Jani, M. Kriipsalu, Z. Vincevica-Gaile, F. Kaczala, G. Celma, R. Ozola, L. Rozina, V. Rudovica, M. Hogland et al. 2018. On the way to ‘zero waste’ management: Recovery potential of elements, including rare earth elements, from fine fraction of waste. J. Clean. Prod. 186:81–90. doi:https://doi.org/10.1016/j.jclepro.2018.03.102.
- Capablo, J., P. A. Jensen, K. H. Pedersen, K. Hjuler, L. Nikolaisen, R. Backman, and F. Frandsen. 2009. Ash properties of alternative biomass. Energy Fuels 23 (4):1965–76.
- Chinyama, M. P. M. 2011. Alternative fuels in cement manufacturing. Altern. Fuel 263–84.
- Cossu, R., and I. D. Williams. 2015. Urban mining: Concepts, terminology, challenges. Waste Manage. 45:1–3. doi:https://doi.org/10.1016/j.wasman.2015.09.040.
- Das, A., A. Vidyadhar, and S. P. Mehrotra. 2009. A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resour. Conserv. Recycl. 53 (8):464–69.
- EPA, US. 1992. Method 1311 Toxicity characteristic leaching procedure (TCLP). In Agency EP, editor. Washington DC, USA1992.
- Font, R., J. Moltó, S. Egea, and J. A. Conesa. 2011. Thermogravimetric kinetic analysis and pollutant evolution during the pyrolysis and combustion of mobile phone case. Chemosphere 85 (3):516–24. doi:https://doi.org/10.1016/j.chemosphere.2011.08.013.
- Fontana, D., M. Pietrantonio, S. Pucciarmati, C. Rao, and F. Forte. 2019. A comprehensive characterization of end-of-life mobile phones for secondary material resources identification. Waste Manage. 99:22–30. doi:https://doi.org/10.1016/j.wasman.2019.08.011.
- Fornalczyk, A., J. Willner, K. Francuz, and J. Cebulski. 2013. E-waste as a source of valuable metals. Arch. Mater. Sci. Eng. 63 (2):87–92.
- Ghosh, B., M. K. Ghosh, P. Parhi, P. S. Mukherjee, and B. K. Mishra. 2015. Waste printed circuit boards recycling: An extensive assessment of current status. J. Clean. Prod. doi:https://doi.org/10.1016/j.jclepro.2015.02.024.
- Guo, J., J. Guo, and Z. Xu. 2009. Recycling of non-metallic fractions from waste printed circuit boards: A review. J. Hazard. Mater. 168 (2–3):567–90. doi:https://doi.org/10.1016/j.jhazmat.2009.02.104.
- Gurumurthy, K., and M. Annamalai. 2019. Microbiological leaching of metals and its recovery from waste electrical and electronic equipment: A review. World Rev. Sci. Technol. Sustainable Dev. 15 (1):1. doi:https://doi.org/10.1504/wrstsd.2019.10019986.
- Hall, W. J., and P. T. Williams. 2007. Separation and recovery of materials from scrap printed circuit boards. Resour. Conserv. Recycl. 51:691–709. doi:https://doi.org/10.1016/j.resconrec.2006.11.010.
- Holgersson, S., B. M. Steenari, M. Björkman, and K. Cullbrand. 2018. Analysis of the metal content of small-size Waste Electric and Electronic Equipment (WEEE) printed circuit boards—Part 1: Internet routers, mobile phones and smartphones. Resour. Conserv. Recycl. 133:300–08. doi:https://doi.org/10.1016/j.resconrec.2017.02.011.
- Ilyas, S., and J.-C. Lee. 2014. Bioleaching of metals from electronic scrap in a stirred tank reactor. Hydrometallurgy 149:50–62. doi:https://doi.org/10.1016/j.hydromet.2014.07.004.
- Işıldar, A., E. R. Rene, E. D. van Hullebusch, and P. N. L. Lens. 2018. Electronic waste as a secondary source of critical metals: Management and recovery technologies. Resour. Conserv. Recycl. 135 (July):296–312. doi:https://doi.org/10.1016/j.resconrec.2017.07.031.
- ITU. 2016. International telecommunication union (2016a). http://www.itu.int/en/ITU-D/Statistics/Documents/publications/misr2016/MISR2016-w4.pdf.
- Jakub, S. 2014. Metals content in printed circuit board waste. Pol. J. Environ. Stud. 23 (6):2365–69.
- Jianfeng, B., W. Jingwei, X. Jinqiu, Z. Mingyuan, G. Jie, and Z. Chenglong. 2009. Microbiological recovering of metals from printed circuit boards by acidithiobacillus ferrooxidans. 2009 IEEE International Symposium on Sustainable Systems and Technology, 1–6. Phoenix, AZ, doi: https://doi.org/10.1109/ISSST.2009.5156716.
- Kan, Y., Q. Yue, J. Kong, B. Gao, and Q. Li. 2015. The application of activated carbon produced from waste Printed Circuit Boards (PCBs) by H 3 PO 4 and steam activation for the removal of malachite green. Chem. Eng. J. 260:541–49. doi:https://doi.org/10.1016/j.cej.2014.09.047.
- Kasper, A. C. 2011. Characterization and recovery of polymers from mobile phone scrap. Waste Manage. Res. 29:714–726. doi:https://doi.org/10.1177/0734242X10391528.
- Kasper, A. C., G. B. T. Berselli, B. D. Freitas, J. A. S. Tenório, A. M. Bernardes, and H. M. Veit. 2011. Printed wiring boards for mobile phones: Characterization and recycling of copper. Waste Manage. 31 (12):2536–45. doi:https://doi.org/10.1016/j.wasman.2011.08.013.
- Khaliq, A., M. A. Rhamdhani, G. Brooks, and S. Masood. 2014. Metal extraction processes for electronic waste and existing industrial routes: A review and australian perspective. Resources 3:152–79. doi:https://doi.org/10.3390/resources3010152.
- Kim, Y., H. Seo, and Y. Roh. 2018. Metal recovery from the mobile phone waste by chemical and biological treatments. Minerals 8 (1). doi: https://doi.org/10.3390/min8010008.
- Kirchherr, J., D. Reike, and M. Hekkert. 2017. Conceptualizing the circular economy: An analysis of 114 definitions. Resour. Conserv. Recycl. 127:221–32.
- Krook, J., A. Carlsson, M. Eklund, P. Frändegård, and N. Svensson. 2011. Urban mining: Hibernating copper stocks in local power grids. J. Clean. Prod. 19 (9–10):1052–56. doi:https://doi.org/10.1016/j.jclepro.2011.01.015.
- Kumar, A., M. E. Holuszko, and T. Janke. 2018. Characterization of the non-metal fraction of the processed waste printed circuit boards. Waste Manage. 75:94–102. doi:https://doi.org/10.1016/j.wasman.2018.02.010.
- Maragkos, K. G., J. N. Hahladakis, and E. Gidarakos. 2013. Qualitative and quantitative determination of heavy metals in waste cellular phones. Waste Manage. 33 (9):1882–89. doi:https://doi.org/10.1016/j.wasman.2013.05.016.
- Molt, J., R. Font, A. Galvez, and J. A. Conesa. 2009. Pyrolysis and combustion of electronic wastes. J. Anal. Appl. Pyrolysis 84 (1):68–78. doi:https://doi.org/10.1016/j.jaap.2008.10.023.
- Nguyen, R. T., L. A. Diaz, D. Devin Imholte, and T. E. Lister. 2017. Economic assessment for recycling critical metals from hard disk drives using a comprehensive recovery process. Jom 69 (9):1546–52. doi:https://doi.org/10.1007/s11837-017-2399-2.
- Nnorom, I. C., and O. Osibanjo. 2009. Toxicity characterization of waste mobile phone plastics. J. Hazard. Mater. 161 (1):183–88. doi:https://doi.org/10.1016/j.jhazmat.2008.03.067.
- Oguchi, M., H. Sakanakura, and A. Terazono. 2013. Toxic metals in WEEE: Characterization and substance flow analysis in waste treatment processes. Sci. Total Environ. 463–464:1124–32. doi:https://doi.org/10.1016/j.scitotenv.2012.07.078.
- Oguchi, M., S. Murakami, H. Sakanakura, A. Kida, and T. Kameya. 2011. A preliminary categorization of end-of-life electrical and electronic equipment as secondary metal resources. Waste Manage. 31 (9–10):2150–60. doi:https://doi.org/10.1016/j.wasman.2011.05.009.
- Oliveira, P. C., M. Cabral, C. A. Nogueira, and F. Margarido. 2010. Printed circuit boards recycling: Characterization of granulometric fractions from shredding process. Mater. Sci. Forum 636–637:1434–39. doi:https://doi.org/10.4028/www.scientific.net/MSF.636-637.1434.
- Owens, B. 2013. Extreme Prospects. Nature 495:S4–6.
- Paiano, A., G. Lagioia, and A. Cataldo. 2013. A critical analysis of the sustainability of mobile phone use. Resour. Conserv. Recycl. 73:162–71. doi:https://doi.org/10.1016/j.resconrec.2013.02.008.
- Pant, D., D. Joshi, M. K. Upreti, and R. K. Kotnala. 2012. Chemical and biological extraction of metals present in E waste: A hybrid technology. Waste Manage. 32 (5):979–90. doi:https://doi.org/10.1016/j.wasman.2011.12.002.
- Pei, D., J. Xu, Q. Zhuang, H.-F. Tse, and M. A. Esteban. 2010. Induced pluripotent stem cell technology in regenerative medicine and biology. Adv. Biochem. Eng. Biotechnol. 123 (July 2015):127–41. doi:https://doi.org/10.1007/10.
- Priya, A., and S. Hait. 2018. Comprehensive characterization of printed circuit boards of various end-of-life electrical and electronic equipment for beneficiation investigation. Waste Manage. 75:103–23. doi:https://doi.org/10.1016/j.wasman.2018.02.014.
- Rajagopal, R. R., R. Rajarao, S. T. Cholake, and V. Sahajwalla. 2017. Sustainable composite panels from non-metallic waste printed circuit boards and automotive plastics. J. Clean. Prod. 144:470–81. doi:https://doi.org/10.1016/j.jclepro.2016.12.139.
- Raman, R., L. S. Aravinda, R. Rajarao, B. Ramachandra, and V. Sahajwalla. 2016. Electrochimica acta activated carbon derived from non-metallic printed circuit board waste for supercapacitor application. Electrochim. Acta 211:488–98. doi:https://doi.org/10.1016/j.electacta.2016.06.077.
- Reuter, M., and A. van Schaik. 2016. Gold – A key enabler of a circular economy. Gold ore processing. Elsevier B.V. doi:https://doi.org/10.1016/b978-0-444-63658-4.00053-0.
- Robinson, B. H. 2009. E-waste: An assessment of global production and environmental impacts. Sci. Total Environ. 408 (2):183–91. doi:https://doi.org/10.1016/j.scitotenv.2009.09.044.
- Rowley, J. 2006. Mobile phone lifecycles. http://gsma.com/publicpolicy/wp-content/uploads/2012/04/environmobilelifecycles.pdf.
- Schuelp, M., C. Hagelueken, R. Kuehr, F. Magalini, C. Maurer, C. Meskers, E. Mueller, and F. Wang. 2009. Recycling from E-waste to resources. United Nations Environment Programme & United Nations University, 120. http://www.unep.org/pdf/Recycling_From_e-waste_to_resources.pdf.
- Sharabaroff, A., D. Bernard, D. Lemarchand, N. Tetreault, C. Thevenet, and A. de Souance. 2017. Increasing the use of alternative fuels at cement plants: International best practice. Washington, DC, USA: World Bank Group.
- Sohaili, J., S. K. Muniyandi, and S. S. Mohamad. 2012. A review on printed circuit boards waste recycling technologies and reuse of recovered nonmetallic materials. Int. J. Sci. Eng. Res. 2 (3):138–44.
- Szamałek, K., and K. Galos. 2016. Metals in Spent Mobile Phones (SMP) – A new challenge for mineral resources management introduction. Gospodarka Surowcami Mineralnymi 32 (4):45–58. doi:https://doi.org/10.1515/gospo-2016-0037.
- Tanskanen, P. 2012. Electronics waste : Recycling of mobile phones, Post-consumer waste recycling and optimal production, Enri Damanhuri, IntechOpen. doi:https://doi.org/10.5772/31530. https://www.intechopen.com/books/post-consumer-waste-recycling-and-optimal-production/electronics-waste-recycling-of-mobile-phones
- Vats, M. C., and S. K. Singh. 2015. Assessment of gold and silver in assorted mobile phone Printed Circuit Boards (PCBs): Original article. Waste Manage. 45 (October). doi: https://doi.org/10.1016/j.wasman.2015.06.002.
- Wu, W., and K. Qiu. 2015. Journal of analytical and applied pyrolysis vacuum co-pyrolysis of Chinese fir sawdust and waste printed circuit boards. Part II: Influence of heating conditions. J. Anal. Appl. Pyrolysis 111:216–23. doi:https://doi.org/10.1016/j.jaap.2014.11.006.
- Xavier, L. H., E. C. Giese, A. C. Ribeiro-Duthie, and F. A. F. Lins. 2019. Sustainability and the circular economy: A theoretical approach focused on e-waste urban mining. Resour. Policy 101467. October 2017. doi:https://doi.org/10.1016/j.resourpol.2019.101467.
- Yamane, L. H., V. T. de Moraes, D. C. R. Espinosa, and J. A. S. Tenório. 2011. Recycling of WEEE: Characterization of spent printed circuit boards from mobile phones and computers. Waste Manage. 31 (12):2553–58. doi:https://doi.org/10.1016/j.wasman.2011.07.006.
- Yoo, J.-M., J. Jeong, K. Yoo, J.-C. Lee, and W. Kim. 2009. Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill. Waste Manage. 29 (3):1132–37.
- Zazycki, M. A., E. H. Tanabe, D. A. Bertuol, and G. L. Dotto. 2017. Adsorption of valuable metals from leachates of mobile phone wastes using biopolymers and activated carbon. J. Environ. Manage. 188:18–25. doi:https://doi.org/10.1016/j.jenvman.2016.11.078.
- Zhan, L., X. Zhao, Z. Ahmad, and Z. Xu. 2020. Chemosphere leaching behavior of Sb and Br from E-waste Fl ame retardant plastics. Chemosphere 245:125684. doi:https://doi.org/10.1016/j.chemosphere.2019.125684.
- Zhu, N., Y. Xiang, T. Zhang, P. Wu, Z. Dang, P. Li, and J. Wu. 2011. Bioleaching of metal concentrates of waste printed circuit boards by mixed culture of acidophilic bacteria. J. Hazard. Mater. 192 (2):614–19. doi:https://doi.org/10.1016/j.jhazmat.2011.05.062.
- Zieri, W., and I. Ismail. 2018. Alternative fuels from waste products in cement industry. In Handbook of ecomaterials, ed. L. Martínez, O. Kharissova, B. Kharisov, 1–24. Springer, Cham. doi:https://doi.org/10.1007/978-3-319-48281-1_142-1