References
- Aranda, A., R. Murillo, T. García, M. S. Callén, and A. M. Mastral. 2007. Steam activation of tyre pyrolytic carbon black: Kinetic study in a thermobalance. Chem. Eng. J. 126 (2–3):79–85. doi:https://doi.org/10.1016/j.cej.2006.08.031.
- Ariyadejwanich, P., W. Tanthapanichakoon, K. Nakagawa, S. Mukai, and H. Tamon. 2003. Preparation and characterization of mesoporous activated carbon from waste tires. Carbon N. Y. 41 (1):157–64. doi:https://doi.org/10.1016/S0008-6223(02)00267-1.
- Aylón, E., A. Fernández-Colino, M. V. Navarro, R. Murillo, T. García, and A. M. Mastral. 2008. Waste tire pyrolysis: comparison between fixed bed reactor and moving bed reactor. Ind. Eng. Chem. Res. 47 (12):4029–33. doi:https://doi.org/10.1021/ie071573o.
- Barbooti, M. M., T. J. Mohamed, A. A. Hussain, and F. O. Abas. 2004. Optimization of pyrolysis conditions of scrap tires under inert gas atmosphere. J. Anal. Appl. Pyrolysis. 72 (1):165–70. doi:https://doi.org/10.1016/j.jaap.2004.05.001.
- Chan, O. S., W. H. Cheung, and G. McKay. 2011. Preparation and characterisation of demineralised tyre derived activated carbon. Carbon N. Y. 49 (14):4674–87. doi:https://doi.org/10.1016/j.carbon.2011.06.065.
- Cunliffe, A. M., and P. T. Williams. 1999. Influence of process conditions on the rate of activation of chars derived from pyrolysis of used tires. Energy & Fuels. 13 (1):166–75. doi:https://doi.org/10.1021/ef9801524.
- Elbaba, I. F., C. Wu, and P. T. Williams. 2010. Catalytic pyrolysis-gasification of waste tire and tire elastomers for hydrogen production. Energy & Fuels. 24 (7):3928–35. doi:https://doi.org/10.1021/ef100317b.
- Ferrari, A. C., and J. Robertson. 2000. Interpretation of Raman spectra of disordered and amorphous carbon. Phys. Rev. B. 61 (20):14095. doi:https://doi.org/10.1103/PhysRevB.61.14095.
- Fu, K., Q. Yue, B. Gao, Y. Sun, and L. Zhu. 2013. Preparation, characterization and application of lignin-based activated carbon from black liquor lignin by steam activation. Chem. Eng. J. 228:1074–82. doi:https://doi.org/10.1016/j.cej.2013.05.028.
- Global demand for car and light commercial vehicle tires from 2012 to 2018, Statista. 2019. https://www.statista.com/statistics/792209/global-tire-demand/
- González, J. F., J. M. Encinar, C. M. González-García, E. Sabio, A. Ramiro, J. L. Canito, and J. Gañán. 2006. Preparation of activated carbons from used tyres by gasification with steam and carbon dioxide. Appl. Surf. Sci. 252 (17):5999–6004. doi:https://doi.org/10.1016/j.apsusc.2005.11.029.
- Heidari, A., and H. Younesi. 2020. Synthesis, characterization and life cycle assessment of carbon nanospheres from waste tires pyrolysis over ferrocene catalyst. J. Environ. Chem. Eng. 8 (2):103669. doi:https://doi.org/10.1016/j.jece.2020.103669.
- Helleur, R., N. Popovic, M. Ikura, M. Stanciulescu, and D. Liu. 2001. Characterization and potential applications of pyrolytic char from ablative pyrolysis of used tires. J. Anal. Appl. Pyrolysis. 58-59:813–24. doi:https://doi.org/10.1016/S0165-2370(00)00207-2.
- Hsi, H.-C., R. S. Horng, T.-A. Pan, and S.-K. Lee. 2011. Preparation of activated carbons from raw and biotreated agricultural residues for removal of volatile organic compounds. J. Air Waste Manag. Assoc. 61 (5):543–51. doi:https://doi.org/10.3155/1047-3289.61.5.543.
- Iraola-Arregui, I., P. Van Der Gryp, and J. F. Görgens. 2018. A review on the demineralisation of pre- and post-pyrolysis biomass and tyre wastes. Waste Manag. 79:667–88. doi:https://doi.org/10.1016/j.wasman.2018.08.034.
- Jakab, E., and M. Omastová. 2005. Thermal decomposition of polyolefin/carbon black composites. J. Anal. Appl. Pyrolysis. 74 (1–2):204–14. doi:https://doi.org/10.1016/j.jaap.2005.02.001.
- Jang, J.-W., T.-S. Yoo, J.-H. Oh, and I. Iwasaki. 1998. Discarded tire recycling practices in the United States, Japan and Korea. Resour. Conserv. Recycl. 22 (1–2):1–14. doi:https://doi.org/10.1016/S0921-3449(97)00041-4.
- Jimoda, L. A., I. D. Sulaymon, A. O. Alade, and G. A. Adebayo. 2018. Assessment of environmental impact of open burning of scrap tyres on ambient air quality. Int. J. Environ. Sci. Technol. 15 (6):1323–30. doi:https://doi.org/10.1007/s13762-017-1498-5.
- Kalitko, V. A. 2010. Steam thermolysis of tire shreds: Modernization in afterburning of accompanying gas with waste steam. J. Eng. Phys. Thermophys. 83 (1):179–87. doi:https://doi.org/10.1007/s10891-010-0333-3.
- Kaminsky, W., and C. Mennerich. 2001. Pyrolysis of synthetic tire rubber in a fluidised-bed reactor to yield 1,3-butadiene, styrene and carbon black. Journal of Analytical and Applied Pyrolysis. 58-59:803–11. doi:https://doi.org/10.1016/S0165-2370(00)00129-7.
- Kandasamy, J., and I. Gökalp. 2015. Pyrolysis, combustion, and steam gasification of various types of scrap tires for energy recovery. Energy & Fuels. 29 (1):346–54. doi:https://doi.org/10.1021/ef502283s.
- Karatas, H., H. Olgun, and F. Akgun. 2012. Experimental results of gasification of waste tire with air&CO2, air&steam and steam in a bubbling fluidized bed gasifier. Fuel Process. Technol. 102:166–74. doi:https://doi.org/10.1016/j.fuproc.2012.04.013.
- Kenzhin, R. M., Y. I. Bauman, I. V. Mishakov, I. V. Zibareva, and A. A. Vedyagin. 2019. Conversion of polymer and resin wastes into the valuable products. 5, 555660.1-7.
- Kumar Singh, R., B. Ruj, A. Jana, S. Mondal, B. Jana, A. Kumar Sadhukhan, and P. Gupta. 2018. Pyrolysis of three different categories of automotive tyre wastes: product yield analysis and characterization. J. Anal. Appl. Pyrolysis. 135:379–89. doi:https://doi.org/10.1016/j.jaap.2018.08.011.
- Kyari, M., A. Cunliffe, and P. T. Williams. 2005. Characterization of oils, gases, and char in relation to the pyrolysis of different brands of scrap automotive tires. Energy & Fuels 19 (3):1165–73. doi:https://doi.org/10.1021/ef049686x.
- Labaki, M., and M. Jeguirim. 2017. Thermochemical conversion of waste tyres—a review. Environ. Sci. Pollut. Res. 24 (11):9962–92. doi:https://doi.org/10.1007/s11356-016-7780-0.
- Larionov, K. B., and A. A. Gromov. 2019. Non-isothermal oxidation of coal with Ce(NO3)3 and Cu(NO3)2 additives. Int. J. Coal Sci. Technol. 6 (1):37–50. doi:https://doi.org/10.1007/s40789-018-0229-y.
- Li, S.-Q., Q. Yao, S.-E. Wen, Y. Chi, and J.-H. Yan. 2005. Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires. J. Air Waste Manage. Assoc. 55 (9):1315–26. doi:https://doi.org/10.1080/10473289.2005.10464728.
- Lin, H.-Y., W.-C. Chen, C.-S. Yuan, and C.-H. Hung. 2008. Surface functional characteristics (C, O, S) of waste tire-derived carbon black before and after steam activation. J. Air Waste Manage. Assoc. 58 (1):78–84. doi:https://doi.org/10.3155/1047-3289.58.1.78.
- López, F. A., T. A. Centeno, O. Rodríguez, and F. J. Alguacil. 2013. Preparation and characterization of activated carbon from the char produced in the thermolysis of granulated scrap tyres. J. Air Waste Manage. Assoc. 63 (5):534–44. doi:https://doi.org/10.1080/10962247.2013.763870.
- Lopez, G., M. Artetxe, M. Amutio, A. Erkiaga, J. Alvarez, I. Barbarias, and M. Olazar. 2012. Preparation of adsorbents derived from waste tires. Chem. Eng. Trans. 29:811–16. doi:https://doi.org/10.3303/CET1229136.
- López, G., M. Olazar, M. Artetxe, M. Amutio, G. Elordi, and J. Bilbao. 2009. Steam activation of pyrolytic tyre char at different temperatures. J. Anal. Appl. Pyrolysis. 85 (1–2):539–43. doi:https://doi.org/10.1016/j.jaap.2008.11.002.
- Martínez, J. D., N. Cardona-Uribe, R. Murillo, T. García, and J. M. López. 2019. Carbon black recovery from waste tire pyrolysis by demineralization: Production and application in rubber compounding. Waste Manag. 85:574–84. doi:https://doi.org/10.1016/j.wasman.2019.01.016.
- Mashkovsky, I. S., P. V. Markov, G. O. Bragina, G. N. Baeva, A. V. Bukhtiyarov, I. P. Prosvirin, V. I. Bukhtiyarov, and A. Y. Stakheev. 2017. Formation of supported intermetallic nanoparticles in the Pd–Zn/α-Al2O3 catalyst. Kinet. Catal. 58 (4):471–79. doi:https://doi.org/10.1134/S0023158417040127.
- Miguel, G. S., G. D. Fowler, M. Dall’Orso, and C. J. Sollars. 2002. Porosity and surface characteristics of activated carbons produced from waste tyre rubber. J. Chem. Technol. Biotechnol. 77 (1):1–8. doi:https://doi.org/10.1002/jctb.518.
- Mmereki, D., B. Machola, and K. Mokokwe. 2019. Status of waste tires and management practice in Botswana. J. Air Waste Manag. Assoc. 69 (10):1230–46. doi:https://doi.org/10.1080/10962247.2017.1279696.
- Mui, E. L. K., D. C. K. Ko, and G. McKay. 2004. Production of active carbons from waste tyres––a review. Carbon N. Y. 42 (14):2789–805. doi:https://doi.org/10.1016/j.carbon.2004.06.023.
- Nemanich, R. J., and S. A. Solin. 1979. First- and second-order Raman scattering from finite-size crystals of graphite. Phys. Rev. B. 20 (2):392. doi:https://doi.org/10.1103/PhysRevB.20.392.
- Park, J., and -S.-S. Lee. 2018. Adsorption of mercury by activated carbon prepared from dried sewage sludge in simulated flue gas. J. Air Waste Manag. Assoc. 68 (10):1077–84. doi:https://doi.org/10.1080/10962247.2018.1468364.
- Policella, M., Z. Wang, K. G. Burra, and A. K. Gupta. 2019. Characteristics of syngas from pyrolysis and CO2-assisted gasification of waste tires. Appl. Energy. 254:113678. doi:https://doi.org/10.1016/j.apenergy.2019.113678.
- Robertson, C. G., C. J. Lin, M. Rackaitis, and C. M. Roland. 2008. Influence of particle size and polymer−filler coupling on viscoelastic glass transition of particle-reinforced polymers. Macromolecules. 41 (7):2727–31. doi:https://doi.org/10.1021/ma7022364.
- Sadezky, A., H. Muckenhuber, H. Grothe, R. Niessner, and U. Pöschl. 2005. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information. Carbon N. Y. 43 (8):1731–42. doi:https://doi.org/10.1016/j.carbon.2005.02.018.
- Seng-eiad, S., and S. Jitkarnka. 2016. Untreated and HNO3-treated pyrolysis char as catalysts for pyrolysis of waste tire: In-depth analysis of tire-derived products and char characterization. J. Anal. Appl. Pyrolysis. 122:151–59. doi:https://doi.org/10.1016/j.jaap.2016.10.004.
- Shu, X., and B. Huang. 2014. Recycling of waste tire rubber in asphalt and Portland cement concrete: an overview. Constr. Build. Mater. 67:217–24. doi:https://doi.org/10.1016/j.conbuildmat.2013.11.027.
- Sun, J., T. A. Brady, M. J. Rood, C. M. Lehmann, M. Rostam-Abadi, and A. A. Lizzio. 1997. Adsorbed natural gas storage with activated carbons made from Illinois coals and scrap tires. Energy & Fuels. 11 (2):316–22. doi:https://doi.org/10.1021/ef960201h.
- Wu, G., S. Asai, M. Sumita, and H. Yui. 2002. Entropy penalty-induced self-assembly in carbon black or carbon fiber filled polymer blends. Macromolecules. 35 (3):945–51. doi:https://doi.org/10.1021/ma0104940.
- Xu, J., J. Yu, J. Xu, C. Sun, W. He, J. Huang, and G. Li. 2020. High-value utilization of waste tires: A review with focus on modified carbon black from pyrolysis. Sci Total Environ. 742:140235. doi:https://doi.org/10.1016/j.scitotenv.2020.140235.
- Zabuga, V. Y., O. O. Bochechka, G. G. Tsapyuk, V. E. Diyuk, T. O. Kurylyak, and V. V. Lisnyak. 2018. Kinetic analysis of nanodiamonds oxidation. Mol. Cryst. Liq. Cryst. 673 (1):89–96. doi:https://doi.org/10.1080/15421406.2019.1578497.
- Zhang, X., H. Li, Q. Cao, L. Jin, and F. Wang. 2018. Upgrading pyrolytic residue from waste tires to commercial carbon black. Waste Manag. Res. J. A Sustain. Circ. Econ. 36:436–44. doi:https://doi.org/10.1177/0734242X18764292.