References
- Altın, İ., A. Bilgin, and B. A. Çeper. 2017. Parametric study on some combustion characteristics in a natural gas fueled dual plug SI engine. Energy 139:1237–42. doi:https://doi.org/10.1016/j.energy.2017.04.026.
- Aslam, M. U., H. H. Masjuki, M. A. Kalam, H. Abdesselam, T. M. I. Mahlia, and M. A. Amalina. 2006. An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle. Fuel 85 (5–6):717–24. doi:https://doi.org/10.1016/j.fuel.2005.09.004.
- Bag, L. 2009. Diesel engine convert to port injection CNG engine using gaseous injector nozzle multi holes geometries improvement : A Review. Semin, 2 Abdul Rahim Ismail and 2 Rosli Abu Bakar Department of Marine Engineering. Institute of Technology Sepuluh. (2), 268–78. November.
- Benajes, J., A. García, J. M. Pastor, and J. Monsalve-Serrano. 2016. Effects of piston bowl geometry on reactivity controlled compression ignition heat transfer and combustion losses at different engine loads. Energy 98:64–77. doi:https://doi.org/10.1016/j.energy.2016.01.014.
- Bianchi, G. M., G. Cazzoli, C. Forte, M. Costa, and M. Oliva. 2014. Development of a emission compliant, high efficiency, two-valve DI diesel engine for off-road application. Energy Procedia 45:1007–16. Elsevier B.V. doi:https://doi.org/10.1016/j.egypro.2014.01.106.
- Chala, G. T., A. R. A. Aziz, and F. Y. Hagos. 2018. Natural gas engine technologies: Challenges and energy sustainability issue. Energies 11 (11):2934. doi:https://doi.org/10.3390/en11112934.
- Cho, H. M., and B. Q. He. 2007. Spark ignition natural gas engines-A review. Energy Convers. Manage. 48 (2):608–18. doi:https://doi.org/10.1016/j.enconman.2006.05.023.
- El-Adawy, M., M. R. Heikal, A. R. A. Aziz, M. I. Siddiqui, and S. Munir. 2017. Characterization of the inlet port flow under steady-state conditions using PIV and POD. Energies 10 (12):1950. doi:https://doi.org/10.3390/en10121950.
- Fino, D., N. Russo, G. Saracco, and V. Specchia. 2006. CNG engines exhaust gas treatment via Pd-spinel-type-oxide catalysts. Catal. Today 117 (4):559–63. doi:https://doi.org/10.1016/j.cattod.2006.06.003.
- Han, Z., and R. D. Reitz. 1997. A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling. Int. J. Heat Mass Transf. 40 (3):613–25. doi:https://doi.org/10.1016/0017-9310(96)00117-2.
- Hill, D. B. 2000. Analysis of combustion in diesel engines fueled by directly injected natural gas. J. Eng. Gas Turbines Power 122 (1):141–49. doi:https://doi.org/10.1115/1.483185.
- Huang, Z., B. Liu, K. Zeng, Y. Huang, D. Jiang, X. Wang, and H. Miao. 2007. Combustion characteristics and heat release analysis of a spark-ignited engine fueled with natural gas-hydrogen blends. Energy Fuels 21 (5):2594–99. doi:https://doi.org/10.1021/ef0701586.
- Jahirul, M. I., R. Saidur, M. Hasanuzzaman, H. H. Masjuki, and M. A. Kalam. 2007. A comparison of the air pollution of gasoline and CNG driven car for Malaysia. Int. J. Mech. Mater. Eng. 2 (2):130–38.
- Johansson, B., and K. Olsson. 1995. Combustion chambers for natural gas Si engines part I: Fluid flow and combustion. SAE Tech. Pap. 412. doi:https://doi.org/10.4271/950469.
- Kaplan, M. 2019. Influence of swirl, tumble and squish flows on combustion characteristics and emissions in internal combustion engine-review. Int. J. Automot. Eng. Technol. 8 (2):83–102. doi:https://doi.org/10.18245/ijaet.558258.
- Korakianitis, T., A. M. Namasivayam, and R. J. Crookes. 2011. Natural-gas fueled spark-ignition (SI) and compression-ignition (CI) engine performance and emissions. Prog. Energy Combust. Sci. 37 (1):89–112. doi:https://doi.org/10.1016/j.pecs.2010.04.002.
- Liu, J., and C. E. Dumitrescu. 2018. Flame development analysis in a diesel optical engine converted to spark ignition natural gas operation. Appl. Energy 230 (September):1205–17. doi:https://doi.org/10.1016/j.apenergy.2018.09.059.
- Martinez, S., A. Irimescu, S. S. Merola, P. Lacava, and P. Curto-Riso. 2017. Flame front propagation in an optical GDI engine under stoichiometric and lean burn conditions. Energies 10 (9):1337. doi:https://doi.org/10.3390/en10091337.
- Mohammed, S. E., M. B. Baharom, A. A. Rashid Aziz, and E. Z. Z. Zainal. 2019. Modelling of combustion characteristics of a single curved-cylinder spark-ignition crank-rocker engine. Energies 12 (17):3313. doi:https://doi.org/10.3390/en12173313.
- Najafi, G., B. Ghobadian, T. Tavakoli, D. R. Buttsworth, T. F. Yusaf, and M. Faizollahnejad. 2009. Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network. Appl. Energy 86 (5):630–39. Elsevier Ltd. doi:https://doi.org/10.1016/j.apenergy.2008.09.017.
- Sarkar, J., and S. Bhattacharyya. 2012. Application of graphene and graphene-based materials in clean energy-related devices Minghui. Arch. Thermodyn. 33 (4):23–40. doi:https://doi.org/10.1002/er.
- Skorek, A., and R. Włodarczyk. 2018. The use of Methane in practical solutions of environmental engineering. J. Ecol. Eng. 19 (2):172–78. doi:https://doi.org/10.12911/22998993/82427.
- Srinivasan, K. K., S. R. Krishnan, S. Singh, K. C. Midkiff, S. R. Bell, W. Gong, S. B. Fiveland, and M. Willi. 2006. The advanced injection low pilot ignited natural gas engine: A combustion analysis. J. Eng. Gas Turbines Power 128 (1):213–18. doi:https://doi.org/10.1115/1.1915428.
- Tahir, M. M., M. S. Ali, M. A. Salim, R. A. Bakar, A. M. Fudhail, M. Z. Hassan, and M. S. Abdul Muhaimin. 2015. Performance analysis of a spark ignition engine using compressed natural gas (CNG) as fuel. Energy Procedia 68:355–62. doi:https://doi.org/10.1016/j.egypro.2015.03.266.
- Tanov, S., L. Pachano, Ö. Andersson, Z. Wang, M. Richter, J. V. Pastor, J. M. García-Oliver, and A. García. 2018. Influence of spatial and temporal distribution of Turbulent Kinetic Energy on heat transfer coefficient in a light duty CI engine operating with partially premixed combustion. Appl. Therm. Eng. 129:31–40. doi:https://doi.org/10.1016/j.applthermaleng.2017.10.006.
- Vester, A. K., Y. Nishio, and P. H. Alfredsson. 2019. Investigating swirl and tumble using two prototype inlet port designs by means of multi-planar PIV. Int. J. Heat Fluid Flow 75 (March 2018):61–76. doi:https://doi.org/10.1016/j.ijheatfluidflow.2018.11.009.
- Vipavanich, C., S. Chuepeng, and S. Skullong. 2018. Heat release analysis and thermal efficiency of a single cylinder diesel dual fuel engine with gasoline port injection. Case Stud. Therm. Eng. 12:143–48. doi:https://doi.org/10.1016/j.csite.2018.04.011.
- Wahono, B., K. Jwa, and O. Lim. 2019. A study on in-cylinder flow of small engine using steady-state flow benches. Energy Procedia 158:1856–62. doi:https://doi.org/10.1016/j.egypro.2019.01.432.
- Wang, L., Z. Chen, T. Zhang, and K. Zeng. 2019. Effect of excess air/fuel ratio and methanol addition on the performance, emissions, and combustion characteristics of a natural gas/methanol dual-fuel engine. Fuel 255 (July):115799. doi:https://doi.org/10.1016/j.fuel.2019.115799.
- Yang, J., X. Dong, Q. Wu, and M. Xu. 2019. Effects of enhanced tumble ratios on the in-cylinder performance of a gasoline direct injection optical engine. Appl. Energy 236 (January 2018):137–46. doi:https://doi.org/10.1016/j.apenergy.2018.11.059.
- Yang, J., M. Xu, D. L. S. Hung, Q. Wu, and X. Dong. 2017. Influence of swirl ratio on fuel distribution and cyclic variation under flash boiling conditions in a spark ignition direct injection gasoline engine. Energy Convers. Manage. 138:565–76. doi:https://doi.org/10.1016/j.enconman.2017.02.024.
- Zhang, S., C. Li, R. Liu, J. Bao, and M. Chi. 2019. Effects of the variable valve lift difference on in-cylinder gas flow in a four-valve gasoline engine. Proc. Inst. Mech. Eng., Part D: J Automob. Eng. 233 (7):1806–17. doi:https://doi.org/10.1177/0954407018789321.
- Zhuang, H., and D. L. S. Hung. 2016. Characterization of the effect of intake air swirl motion on time-resolved in-cylinder flow field using quadruple proper orthogonal decomposition. Energy Convers. Manage. 108:366–76. doi:https://doi.org/10.1016/j.enconman.2015.10.080.