References
- ABB. November 2005. Easy line continuous gas analyzers model EL3020 data sheet 10/24-4.10 EN. ABB Automation GmbH Analytical Division. Accessed September 1, 2020. https://library.e.abb.com/public/efd7afc56879d6b5c1257b0c0054673c/10-24-410-02-EN.pdf
- Ahmed, S., R. Kumar, and J. E. Helt. 1989. Computer simulation of a municipal solid waste combustor. JAPCA 39 (10):1328–33. doi:https://doi.org/10.1080/08940630.1989.10466627.
- Aleksandrov, K., H.-J. Gehrmann, M. Hauser, H. Mätzing, D. Pigeon, D. Stapf, and M. Wexler. 2019. Waste incineration of Polytetrafluoroethylene (PTFE) to evaluate potential formation of per- and Poly-Fluorinated Alkyl Substances (PFAS) in flue gas. Chemosphere 226:898–906. doi:https://doi.org/10.1016/j.chemosphere.2019.03.191.
- Aniolek, K. W., and R. D. Wilk. 1995/05. Preflame oxidation characteristics of methanol. Energy & Fuels 9(3):395–405. doi:https://doi.org/10.1021/ef00051a002.
- Aracil, I., R. Font, and J. A. Conesa. 2005. Semivolatile and volatile compounds from the pyrolysis and combustion of polyvinyl chloride. J Anal Appl Pyrolysis 74 (1–2):465–78. doi:https://doi.org/10.1016/j.jaap.2004.09.008.
- Asthana, A., Y. Ménard, P. Sessiecq, and F. Patisson. 2010/08. Modeling on-grate MSW incineration with experimental validation in a batch incinerator. Ind Eng Chem Res 49(16):7597–604. doi:https://doi.org/10.1021/ie100175e.
- ASTM E659-15, Standard Test Method for Autoignition Temperature of Chemicals. ASTM International, West Conshohocken, PA, 2015.
- Balat, M. 2011. Chapter 3 Fuels from biomass – Overview. In The Biofuels Handbook, ed. J. G. Speight, 76–117. Cambridge, UK: The Royal Society of Chemistry.
- Basevich, V. Y. 1987/01. Chemical kinetics in the combustion processes: A detailed kinetics mechanism and its implementation. Progress in Energy and Combustion Science 13(3):199–248. doi:https://doi.org/10.1016/0360-1285(87)90011-6.
- Beauchemin, D., Ed. 2020. Sample Introduction Systems in ICPMS and ICPOES. Amsterdam: Elsevier.
- Bell, K. M., C. F. H. Tipper, and C. E. H. Bawn. 1956. The slow combustion of methyl alcohol. A general investigation. Proc. R. Soc. Lond. A Math. Phys. Sci. 238 (1213):256–68. doi:https://doi.org/10.1098/rspa.1956.0218.
- Berger, U., M. A. Kaiser, A. Kärrman, J. L. Barber, and S. P. J. van Leeuwen. 2011/06. Recent developments in trace analysis of poly- and perfluoroalkyl substances. Anal Bioanal Chem 400(6):1625–35. doi:https://doi.org/10.1007/s00216-011-4823-8.
- Biagini, E., F. Lippi, and L. Tognotti. 2006/12. Characterization of a lab-scale platinum filament pyrolyzer for studying the fast devolatilization of solid fuels. Fuel 85(17–18):2408–18. doi:https://doi.org/10.1016/j.fuel.2006.06.002.
- Bodurtha, F. T. 1980. Industrial explosion prevention and protection. New York: McGraw-Hill.
- Bogue, R. W. 2006. Technology roadmap: Optoelectronic gas sensors in the petrochemicals, gas and water industries. OtpoCem.Net Consortium. Accessed August 29, 2020. https://www.researchgate.net/profile/Robert-Bogue-2/publication/228994463_Technology_roadmap_Optoelectronic_gas_sensors_in_the_petrochemicals_gas_and_water_industries/links/5423fe4c0cf26120b7a70d18/Technology-roadmap-Optoelectronic-gas-sensors-in-the-petrochemicals-gas-and-water-industries.pdf
- Bollinger, R. E., D. G. Clark, A. M. Dowell III, R. M. Ewbank, D. C. Hendershot, W. K. Lutz, S. I. Meszaros, D. E. Park, E. D. Wixom, and D. A. Crowl, Eds. Inherently safer chemical processes: A life cycle approach (A CCPS concept book). New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1996.
- Bone, W. A., and J. B. Gardner. 1936. Comparative studies of the slow combustion of methane, methyl alcohol, formaldehyde, and formic acid. Proc. R. Soc. Lond. A Math. Phys. Sci. 154 (882):297–328. doi:https://doi.org/10.1098/rspa.1936.0052.
- Borman, G. L., and K. W. Ragland. 1998. Combustion engineering. Boston: McGraw-Hill.
- Brunner, C. R. 1985. Estimating incinerator emissions. In Hazardous air emissions from incineration, 108–22. New York: Chapman and Hall.
- Buck, R. C., J. Franklin, U. Berger, J. M. Conder, I. T. Cousins, P. de Voogt, A. A. Jensen, K. Kannan, S. A. Mabury, S. P. van Leeuwen, et al. 2011. Perfluoroalkyl and polyfluoroalkyl substances in the environment: Terminology, classification, and origins. Integr Environ Assess Manag 7 (4):513–41. doi:https://doi.org/10.1002/ieam.258.
- Burgess, C., and D. G. Jones. 1998. Equipment qualification for demonstrating the fitness for purpose of analytical instrumentation. The Analyst 123 (9):1879–86. doi:https://doi.org/10.1039/A804670K.
- Caballero, J. A., R. Font, and A. Marcilla. 1996/12. Kinetic study of the secondary thermal decomposition of Kraft lignin. J Anal Appl Pyrolysis 38(1–2):131–52. doi:https://doi.org/10.1016/S0165-2370(96)00953-9.
- Caballero, J. A., R. Font, A. Marcilla, and A. N. García. 1993/12. Flash pyrolysis of Klason lignin in a Pyroprobe 1000. J Anal Appl Pyrolysis. 27 (2): 221–44. doi:https://doi.org/10.1016/0165-2370(93)80011-N.
- Carberry, J. J. 1964. Designing laboratory catalytic reactors. Ind Eng Chem 56 (11):39–46. doi:https://doi.org/10.1021/ie50659a007.
- Carnes, R. A., and B. Dellinger. 1987. A correlation of emissions from laboratory and pilot scale thermal decomposition of an organic compound mixture. Toxicol Environ Chem 14 (4):307–20. doi:https://doi.org/10.1080/02772248709357214.
- Carroll, G. J., R. C. Thurnau, J. W. Lee, L. R. Waterland, B. Dellinger, and P. H. Taylor. 1992. Pilot-scale evaluation of an incinerability ranking system for hazardous organic compounds. J. Air Waste Manage. Assoc. 42 (11):1430–36. doi:https://doi.org/10.1080/10473289.1992.10467089.
- Carvalho, J. A., and W. F. N. Dos Santos. 1990/09. Radiation errors in temperature measurements with thermocouples in a cylindrical combustor. International Communications in Heat and Mass Transfer 17(5):663–73. doi:https://doi.org/10.1016/0735-1933(90)90014-B.
- Castaldi, M. J., Y. Chi, S. Ciuta, J. Dong, P. He, N. Lyczko, A. Nzihou, and F. Wang. 2020. Municipal solid waste. In Handbook on characterization of biomass, biowaste and related by-products, ed. A. Nzihou, 731–840. Cham, Switzerland: Springer International Publishing.
- Castaldi, M. J., and N. J. Themelis. March 01 2010. The case for increasing the global capacity for waste to energy (WTE). Waste and Biomass Valorization 1 (1):91–105. doi:https://doi.org/10.1007/s12649-010-9010-1.
- Chandler, A. J., T. T. Eighmy, J. Hartlén, O. Hjelmar, D. S. Kosson, S. E. Sawell, H. A. van der Sloot, and J. Vehlow. “Chapter 3 - Municipal solid waste incineration technologies,” In Municipal solid waste incinerator residues (Studies in Environmental Science 67). Amsterdam: Elsevier, 1997, pp. 59–95.
- Chen, C.-C., H.-J. Liaw, C.-M. Shu, and Y.-C. Hsieh. 2010. Autoignition temperature data for methanol, ethanol, propanol, 2-butanol, 1-butanol, and 2-methyl-2,4-pentanediol. J Chem Eng Data 55 (11):5059–64. doi:https://doi.org/10.1021/je100619p.
- Clarke, A. G. 1998a. Gas sampling and conditioning. In Industrial air pollution monitoring, ed. A. G. Clarke, 81–99. Dordrecht: Springer Netherlands.
- Clarke, A. G. 1998b. Batch sampling and wet chemical methods of gas analysis. In Industrial air pollution monitoring, ed. A. G. Clarke, 100–19. Dordrecht: Springer Netherlands.
- Coleman, M. D., S. Render, C. Dimopoulos, A. Lilley, R. A. Robinson, T. O. M. Smith, R. Camm, and R. Standring. 2015. “Testing equivalency of an alternative method based on portable FTIR to the European standard reference methods for monitoring emissions to air of CO, NO x, SO 2, HCl, and H 2 O,” J. Air Waste Manage. Assoc. 65 (8):1011–19. doi: https://doi.org/10.1080/10962247.2015.1058868.
- Collard, F.-X., and J. Blin. 2014/10. A review on pyrolysis of biomass constituents: Mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and lignin. Renewable and Sustainable Energy Reviews 38:594–608. doi:https://doi.org/10.1016/j.rser.2014.06.013.
- Conesa, J. A., R. Font, A. Marcilla, and A. N. García. 1994/11. Pyrolysis of polyethylene in a fluidized bed reactor. Energy & Fuels 8(6):1238–46. doi:https://doi.org/10.1021/ef00048a012.
- Corey, R. C., L. A. Spanct, C. H. Schwartz, and H. Perry. 1953. Experimental study of effects of tangential overfire air on the incineration of combustible wastes. Air Repair 3 (2):109–16. doi:https://doi.org/10.1080/00966665.1953.10467597.
- Coward, H. F., and G. W. Jones. 1952. Limits of flammability of gases and vapors. Washington, D.C.: U.S. Department of the Interior, Bureau of Mines. Bureau of Mines Bulletin 503.
- Crank, J. 1979. The mathematics of diffusion. 2d ed. Oxford, UK: Clarendon Press.
- Curran, H. J. 2019a. Developing detailed chemical kinetic mechanisms for fuel combustion. Proceedings of the Combustion Institute 37 (1):57–81. doi:https://doi.org/10.1016/j.proci.2018.06.054.
- Curran, H. J. 2019b. Combustion chemistry and modeling lecture notes: Basic chemical kinetic principles I. Princeton-Combustion Institute Summer School on Combustion. Accessed August 29, 2020. https://cefrc.princeton.edu/sites/cefrc/files/day2_curran.pdf
- Davison, B. H., J. Parks, M. F. Davis, and B. S. Donohoe. 2013. Plant cell walls: Basics of structure, chemistry, accessibility and the influence on conversion. In Aqueous Pretreatment of Plant Biomass for Biological and Chemical Conversion to Fuels and Chemicals, ed. C. E. Wyman, 23–38. Chichester, UK: John Wiley & Sons.
- Dellinger, B., P. H. Taylor, and C. C. Lee. 1993. Full-scale evaluation of the thermal stability-based hazardous organic waste incinerability ranking. Air & Waste 43 (2):203–07. doi:https://doi.org/10.1080/1073161X.1993.10467126.
- Demirbas, M. F. 2006/09. Hydrogen from various biomass species via pyrolysis and steam gasification processes. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 28(3):245–52. doi:https://doi.org/10.1080/009083190890003.
- Diemer, R. B., T. D. Ellis, G. D. Silcox, J. S. Lighty, and D. W. Pershing. 1995. Incinerators. In Kirk‐Othmer Encyclopedia of Chemical Technology, ed. J. Kroschwitz and M. Howe-Grant, vol. 14, 86–122. New York: John Wiley & Sons.
- Dos Santos, A. M., and R. Collin, “Study of a MSW incinerator: Overall operation and on-site measurements over the grate,” in Proceedings of the 1992 National Waste Processing Conference, Detroit, 1992: American Society of Mechanical Engineers, pp. 133–43.
- Ebringerová, A., Z. Hromádková, and T. Heinze. 2005. Hemicellulose. In Polysaccharides I: Structure, Characterization and Use, ed. T. Heinze, 1–67. Berlin, Heidelberg: Springer.
- El Asri, R., and D. Baxter. 2004. Process control in municipal solid waste incinerators: Survey and assessment. Waste Management & Research: The Journal for a Sustainable Circular Economy 22 (3):177–85. doi:https://doi.org/10.1177/0734242x04044352.
- Eleazer, W. E., W. S. Odle, Y.-S. Wang, and M. A. Barlaz. 1997. Biodegradability of municipal solid waste components in laboratory-scale landfills. Environ. Sci. Technol. 31 (3):911–17. doi:https://doi.org/10.1021/es9606788.
- EPA. Emission guidelines for small municipal waste combustion units (65 Federal Register 76378). December 6, 2000.
- EPA. Method 26: Determination of hydrogen halide and halogen emissions from stationary sources non-isokinetic method. 40 CFR 60 Appendix A, 2019.
- EPA. Municipal waste combustion multipollutant study summary report: Marion County solid waste-to-energy Ogden Martin Systems of Marion, Inc. Brooks, Oregon. EMB Report 86-MIN-03A. EPA Office of Air Quality Planning and Standards, Research Triangle Park, NC, 1988.
- EPA. 1995. Compilation of air pollutant emission factors (AP-42), 5th ed. (EPA Office of Air Quality Planning and Standards). Research Triangle Park, NC: U.S. Environmental Protection Agency.
- EPA. 2006. Standards of performance for new stationary sources and emission guidelines for existing sources: Large municipal waste combustors. Federal Register 71:27324–48.
- EPA. 2009. Mandatory greenhouse gas reporting rule: EPA’s response to public comments, volume no. 15: Subpart C - general stationary fuel combustion sources, Washington, DC: EPA Office of Atmosphere Programs, Climate Change Division. Accessed August 25, 2020. https://www.epa.gov/sites/production/files/2015-02/documents/subpartc-rtc.pdf
- EPA. 40 CFR 60.13 monitoring requirements. Washington, D.C, 2018a.
- EPA. 40 CFR 60.8 performance tests. Washington, DC, 2018b.
- EPA. 2019a. Advancing sustainable materials management: 2017 fact sheet. Accessed April 23, 2020. https://www.epa.gov/sites/production/files/2019-11/documents/2017_facts_and_figures_fact_sheet_final.pdf
- EPA. 2019b. Advancing sustainable materials management: 2016 and 2017 tables and figures. Accessed April 23, 2020. https://www.epa.gov/sites/production/files/2019-11/documents/2016_and_2017_facts_and_figures_data_tables_0.pdf
- Esperanza, M. M., R. Font, and A. N. Garc‡a. 2000. Toxic byproducts from the combustion of varnish wastes based on polyurethane in a laboratory furnace. J. Hazard. Mater. 77 (1–3):107–21. doi:https://doi.org/10.1016/S0304-3894(00)00182-5.
- Fängmark, I., S. Marklund, C. Rappe, B. Strömberg, and N. Berge. 1991. Use of a synthetic refuse in a pilot combustion system for optimizing dioxin emission, part II. Chemosphere 23 (8–10):1233–43. doi:https://doi.org/10.1016/0045-6535(91)90148-7.
- Font, R., A. Marcilla, A. N. García, J. A. Caballero, and J. A. Conesa. 1995/04. Comparison between the pyrolysis products obtained from different organic wastes at high temperatures. J Anal Appl Pyrolysis 32 /01/:41–49. doi:https://doi.org/10.1016/0165-2370(94)00835-O.
- Fritsky, K. J., D. L. Miller, and N. P. Cernansky. 1994/09. Methodology for modeling the devolatilization of refuse-derived fuel from thermogravimetric analysis of municipal solid waste components. Air & Waste 44(9):1116–23. /01. doi:https://doi.org/10.1080/10473289.1994.10467308.
- Frolich, P. K., H. B. Spalding, and T. S. Bacon. 1928. Destructive distillation of wood and cellulose under pressure. Ind Eng Chem 20 (1):36–40. doi:https://doi.org/10.1021/ie50217a019.
- Froment, G. F. 1981. Thermal cracking for olefins production. Fundamentals and their application to industrial problems. Chem Eng Sci 36 (8):1271–82. doi:https://doi.org/10.1016/0009-2509(81)80161-3.
- Fukutome, A., H. Kawamoto, and S. Saka. 2016. Molecular mechanisms for the gas-phase conversion of intermediates during cellulose gasification under nitrogen and oxygen/nitrogen. Chemical Industry and Chemical Engineering Quarterly 22 (4):343–53. doi:https://doi.org/10.2298/CICEQ160325018F.
- Funazukuri, T., R. R. Hudgins, and P. L. Silveston. 1986. Correlation of volatile products from fast cellulose pyrolysis. Industrial & Engineering Chemistry Process Design and Development 25 (1):172–81. doi:https://doi.org/10.1021/i200032a027.
- Funazukuri, T., R. R. Hudgins, and P. L. Silveston. 1987/01. Product distribution for flash pyrolysis of cellulose in a coil pyrolyzer. J Anal Appl Pyrolysis 10(3):225–49. doi:https://doi.org/10.1016/0165-2370(87)80005-0.
- García, A. N., R. Font, and A. Marcilla. 1992/05. Kinetic studies of the primary pyrolysis of municipal solid waste in a Pyroprobe 1000. J Anal Appl Pyrolysis 23(1):99–119. doi:https://doi.org/10.1016/0165-2370(92)80016-F.
- García, A. N., A. Marcilla, and R. Font. 1995/04. Thermogravimetric kinetic study of the pyrolysis of municipal solid waste. Thermochim Acta 254:277–304. doi:https://doi.org/10.1016/0040-6031(94)02002-6.
- García, A. N., N. Viciano, and R. Font. 2007. Products obtained in the fuel-rich combustion of PTFE at high temperature. J Anal Appl Pyrolysis 80 (1):85–91. doi:https://doi.org/10.1016/j.jaap.2007.01.004.
- Giraud, R. J., P. H. Taylor, and C.-P. Huang. 2021. Combustion operating conditions for municipal Waste-to-Energy facilities in the U.S. Waste Management 132:124–32. doi:https://doi.org/10.1016/j.wasman.2021.07.015.
- Glassman, I., R. A. Yetter, and N. G. Glumac. 2015. Combustion. 5th ed. Waltham, MA: Academic Press.
- Goh, Y. R., R. G. Siddall, V. Nasserzadeh, R. Zakaria, J. Swithenbank, Lawrence, N. Garrod, and B. Jones. 1998. Mathematical modelling of the burning bed of a waste incinerator. J. Inst. Energy 71 (487):110–18.
- Goh, Y. R., Y. B. Yang, J. Goodfellow, R. Zakaria, C. N. Lim, K. H. Chan, G. Reynolds, R. G. Siddall, V. Nasserzadeh, J. Swithenbank, “Energy from waste: Current research and development in municipal waste incineration at Sheffield University waste incineration centre (SUWIC),” International Journal of Ambient Energy, vol. 21, no. 3, pp. 149–60, 2000/07/01, 2000. doi: https://doi.org/10.1080/01430750.2000.9675367.
- Graham, J. L., J. M. Berman, and B. Dellinger. 1993. High-temperature thermal—photolytic oxidation of monochlorobenzene. J Photochem Photobiol A Chem 71(1):65–74. doi. doi:https://doi.org/10.1016/1010-6030(93)87011-B.
- Gretzinger, J., and W. R. Marshall Jr. 1961. Characteristics of pneumatic atomization. AIChE J. 7 (2):312–18. doi:https://doi.org/10.1002/aic.690070229.
- Hajaligol, M. R., J. B. Howard, J. P. Longwell, and W. A. Peters. 1982/07. Product compositions and kinetics for rapid pyrolysis of cellulose. Industrial & Engineering Chemistry Process Design and Development 21(3):457–65. doi:https://doi.org/10.1021/i200018a019.
- Hickman, D. A., “Right-sizing lab fixed bed reactors for gas-solid Systems (webinar),” American Institute of Chemical Engineers, https://www.aiche.org/academy/webinars/right-sizing-lab-fixed-bed-reactors-gas-solid-systems, March 18, 2020.
- Hofreiter, B. T. 1980. Natural products for wet-end addition. In Pulp and paper chemistry and chemical technology, ed. J. P. Casey, ch. 14, vol. 3, 3rd ed., 1475–514. New York: John Wiley & Sons.
- Hottel, H. C., and W. R. Hawthorne. 1948/01. Diffusion in laminar flame jets. Symposium on Combustion and Flame, and Explosion Phenomena 3(1):254–66. doi:https://doi.org/10.1016/S1062-2896(49)80034-1.
- Howard, J. B., G. C. Williams, and D. H. Fine. 1973/01. Kinetics of carbon monoxide oxidation in postflame gases. Symposium (International) on Combustion 14(1):975–86. doi:https://doi.org/10.1016/S0082-0784(73)80089-X.
- Jacobson, J. S., and L. I. Heifer. 1976/11. Evaluation of probes used for source sampling of hydrogen fluoride. J. Air Pollut. Control Assoc. 26(11):1065–68. doi:https://doi.org/10.1080/00022470.1976.10470361.
- Jahnke, A., and U. Berger. 2009. Trace analysis of per- and polyfluorinated alkyl substances in various matrices—How do current methods perform? J. Chromatogr. A 1216 (3):410–21. doi:https://doi.org/10.1016/j.chroma.2008.08.098.
- Jegers, H. E., and M. T. Klein. 1985. Primary and secondary lignin pyrolysis reaction pathways. Industrial & Engineering Chemistry Process Design and Development 24 (1):173–83. doi:https://doi.org/10.1021/i200028a030.
- Ji, L., L. P. Riana, M. Sablier, and J. Vial. 2009/04. Precision of flash pyrolysis-GC-MS analysis: Experimental evaluation of the sources of variability. Chromatographia 69(7–8):691–99. doi:https://doi.org/10.1365/s10337-009-0965-7.
- Johnstone, R. E., and M. W. Thring. 1957. Pilot plants, models, and scale-up methods in chemical engineering. (McGraw-Hill Series in Chemical Engineering). New York: McGraw-Hill.
- Kaminsky, W. 1985/04. Thermal recycling of polymers. J Anal Appl Pyrolysis 8:439–48. doi:https://doi.org/10.1016/0165-2370(85)80042-5.
- Kamuk, B., “Is De-NOx by SCR to Be the future in US?: Technology and tendencies within APC-equipment,” in Proceedings of the 17th Annual North American Waste-to-Energy Conference, Chantilly, VA, 2009: American Society of Mechanical Engineers, pp. 77–82, doi: https://doi.org/10.1115/NAWTEC17-2364.
- Kedrowski, C., and P. Chromec. 2013. Hitachi Zosen Inova technology. In Renewable energy systems, ed. M. Kaltschmitt, N. J. Themelis, L. Y. Bronicki, L. Söder, and L. A. Vega, 1060–99. New York: Springer.
- Keith, L. H. 1996. Compilation of EPA’s sampling and analysis methods. Boca Raton: CRC/Lewis Publishers.
- Kerfoot, H. B., S. L. Pierett, E. N. Amick, D. W. Bottrell, and J. D. Petty. 1990/08. Analytical performance of four portable gas chromatographs under field conditions. J. Air Waste Manage. Assoc. 40(8):1106–13. doi:https://doi.org/10.1080/10473289.1990.10466755.
- Kilgroe, J. D., L. Patrick Nelson, P. J. Schindler, and W. Steven Lanier. 1990/11. Combustion control of organic emissions from municipal waste combustors. Combustion Science and Technology 74(1–6):223–44. doi:https://doi.org/10.1080/00102209008951690.
- Kim, D.-K., I. Y. Han, and S. J. Kim. 2007/03. Study on the steady-state characteristics of the sensor tube of a thermal mass flow meter. Int J Heat Mass Transf 50(5–6):1206–11. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2006.08.021.
- Kohl, A. L., and F. C. Riesenfeld. 1979. Gas purification. 3rd ed. Houston: Gulf Publishing Company Book Division.
- Kristensen, E., J. Kristensen, and A. Rodrigues. 2017. Evaluation of an operation of burning of wheat straw batches in a pilot scale facility in Denmark. Silva Lusitana 25 (1):31–49.
- Krusic, P. J., A. A. Marchione, and D. C. Roe. 2005/12. Gas-phase NMR studies of the thermolysis of perfluorooctanoic acid. J Fluor Chem 126(11–12):1510–16. doi:https://doi.org/10.1016/j.jfluchem.2005.08.016.
- Lange, N. A., and J. A. Dean. 1979. Lange’s handbook of chemistry. 12th ed. New York: McGraw-Hill.
- Larsen, B. S., and M. A. Kaiser. 2007. Challenges in perfluorocarboxylic acid measurements. Anal. Chem. 79 (11):3966–73. doi:https://doi.org/10.1021/ac071918c.
- Leckner, B. 2015. Process aspects in combustion and gasification waste-to-energy (WtE) units. Waste Management 37:13–25. doi:https://doi.org/10.1016/j.wasman.2014.04.019.
- Leckner, B., and F. Lind. 2020/05. Combustion of municipal solid waste in fluidized bed or on grate – A comparison. Waste Management 109:94–108. doi:https://doi.org/10.1016/j.wasman.2020.04.050
- Leckner, B., P. Szentannai, and F. Winter. 2011. Scale-up of fluidized-bed combustion – A review. Fuel 90 (10):2951–64. doi:https://doi.org/10.1016/j.fuel.2011.04.038.
- Lee, K. C., L. G. Doucet, B. Dellinger, E. R. Altwicker, and E. T. Opelt. 1987. Incineration of hazardous waste: Critical review discussion papers. JAPCA 37 (9):1011–24. doi:https://doi.org/10.1080/08940630.1987.10466291.
- Lee, C. C., and G. L. Huffman. 1987/01. EPA’s pilot-scale research in hazardous waste thermal destruction. Waste Management & Research 5(1):67–71. doi:https://doi.org/10.1016/0734-242X(87)90035-8.
- Lee, C. C., and G. L. Huffman. 1989. Incineration of solid waste. Environmental Progress 8 (3):143–51. doi:https://doi.org/10.1002/ep.3300080312.
- Lee, C. C., G. L. Huffman, and D. A. Oberacker. 1986/08. An overview of hazardous/toxic waste incineration. J. Air Pollut. Control Assoc. 36(8):922–31. doi:https://doi.org/10.1080/00022470.1986.10466132.
- Lee, S.-H., N. J. Themelis, and M. J. Castaldi. 2007/03. High-temperature corrosion in waste-to-energy boilers. Journal of Thermal Spray Technology 16(1):104–10. doi:https://doi.org/10.1007/s11666-006-9005-4.
- Lemieux, P., M. Strynar, D. Tabor, J. Wood, M. Cooke, B. Rayfield, and P. Kariher. Emissions of fluorinated compounds from the combustion of carpeting. In International Conference on Incineration and Thermal Treatment Technologies, IT3, Phoenix, Arizona, 2007.
- Liao, S.-Y., H.-M. Li, L. Mi, X.-H. Shi, G. Wang, Q. Cheng, and C. Yuan. 2011. Development and validation of a reduced chemical kinetic model for methanol oxidation. Energy & Fuels, 25 (1): 60–71. doi:https://doi.org/10.1021/ef101335q.
- Lin, C., T. C. Wu, and S. E. Liu. 1997. Correlation between the combustion performance indices and the products of incomplete combustion (PICs) in a laboratory scale incinerator. Hazardous and Industrial Wastes: Proceedings of the Mid-Atlantic Industrial and Hazardous Waste Conference, Blacksburg, VA, 29, 344–52.
- Linak, W. P., J. D. Kilgroe, J. A. McSorley, J. O. L. Wendt, and J. E. Dunn. 1987. On the occurrence of transient puffs in a rotary kiln incinerator simulator I. Prototype solid plastic wastes. JAPCA 37 (1):54–65. doi:https://doi.org/10.1080/08940630.1987.10466202.
- Lissianski, V. V., V. M. Zamansky, and W. C. Gardiner. 2000. Combustion chemistry modeling. In Gas-phase combustion chemistry, ed. W. C. Gardiner, ch. 1, 1–123. New York: Springer.
- Lupton, R. C., and J. M. Allwood. 2017. Hybrid Sankey diagrams: Visual analysis of multidimensional data for understanding resource use. Resources, Conservation and Recycling 124:141–51. doi:https://doi.org/10.1016/j.resconrec.2017.05.002.
- Lusardi, M. R., M. Kohn, N. J. Themelis, and M. J. Castaldi. 2014. Technical assessment of the CLEERGAS moving grate-based process for energy generation from municipal solid waste. Waste Management & Research: The Journal for a Sustainable Circular Economy 32 (8):772–81. doi:https://doi.org/10.1177/0734242X14543813.
- Manion, J. A., and W. Tsang. 1997. The removal of fluorine atoms from halocarbons. In Halon Replacements, ed. A. W. Miziolek and W. Tsang, vol. 611, ch. 26, 341–57 ( ACS Symposium Series, no. 611). Washington, DC: American Chemical Society.
- Marklund, S., I. Fängmark, C. Rappe, N. Berge, and B. Strömberg. 1990. Use of a synthetic refuse in a pilot combustion system for optimizing dioxin emission. Part 1. Chemosphere 20 (10–12):1859–65. doi:https://doi.org/10.1016/0045-6535(90)90353-U.
- Martin, J. W., K. Kannan, U. Berger, P. D. Voogt, J. Field, J. Franklin, J. P. Giesy, T. Harner, D. C. G. Muir, B. Scott, et al. 2004. Peer reviewed: Analytical challenges hamper perfluoroalkyl research. Environ. Sci. Technol. 38 (13): 248A–255A. doi: https://doi.org/10.1021/es0405528.
- Matsakas, L., Q. Gao, S. Jansson, U. Rova, and P. Christakopoulos. 2017. Green conversion of municipal solid wastes into fuels and chemicals. Electronic Journal of Biotechnology 26:69–83. doi:https://doi.org/10.1016/j.ejbt.2017.01.004.
- Mätzing, H., H.-J. Gehrmann, H. Seifert, and D. Stapf. 2018/08. Modelling grate combustion of biomass and low rank fuels with CFD application. Waste Management 78: 686–97. doi:https://doi.org/10.1016/j.wasman.2018.05.008.
- McCurdy, J. 2001. Replacement of outlet monitors for the continuous emission monitoring system at the York County Resource Recovery Center. In Proceedings of the 9th Annual Waste-to-Energy Conference (NAWTEC 9), Miami: American Society of Mechanical Engineers, doi: https://doi.org/10.1115/NAWTEC9-111.
- McEnally, C. S., and L. D. Pfefferle. 2011/03. Sooting tendencies of oxygenated hydrocarbons in laboratory-scale flames. Environ. Sci. Technol. 45(6):2498–503. doi:https://doi.org/10.1021/es103733q.
- Meer, H. G. 1961. Incinerator Furnace Temperature. J. Air Pollut. Control Assoc. 11 (10):479–82. doi:https://doi.org/10.1080/00022470.1961.10468028.
- Mettler, M. S., S. H. Mushrif, A. D. Paulsen, A. D. Javadekar, D. G. Vlachos, and P. J. Dauenhauer. 2012. Revealing pyrolysis chemistry for biofuels production: Conversion of cellulose to furans and small oxygenates. Energy Environ. Sci. 5 (1):5414–24. doi:https://doi.org/10.1039/C1EE02743C.
- Mitchell, W. J., and R. Midgett. 1976. Adequacy of sampling trains and analytical procedures used for fluoride. Atmospheric Environment (1967) 10(10):865–72. 1976/01/01/. doi:https://doi.org/10.1016/0004-6981(76)90141-4.
- Moldoveanu, S. C. 2010. Chapter 4 Instrumentation used in pyrolysis. In Pyrolysis of organic molecules: Applications to health and environmental issues, ed. S. C. Moldoveanu, vol. 28, 79–104 (Techniques and Instrumentation in Analytical Chemistry). Amsterdam: Elsevier.
- Moldoveanu, S. 2019. Pyrolysis of Organic Molecules: Applications to Health and Environmental Issues. 2nd ed. Amsterdam: Elsevier.
- Montaser, A., M. G. Minnich, J. A. McLean, H. Liu, J. A. Caruso, and C. W. McLeod. 1998. Sample introduction in ICPMS. In Inductively coupled plasma mass spectrometry, ed. A. Montaser, ch. 3, 85–224. New York: Wiley-VCH.
- Myers, K. J., A. Bakker, and D. Ryan. 1997. Avoid agitation by selecting static mixers. Chemical Engineering Progress 93 (6):28–38.
- Ndibe, C., S. Grathwohl, M. Paneru, J. Maier, and G. Scheffknecht. 2015/09. Emissions reduction and deposits characteristics during cofiring of high shares of torrefied biomass in a 500kW pulverized coal furnace. Fuel 156:177–89. doi:https://doi.org/10.1016/j.fuel.2015.04.017.
- Niessen, W. R. 2010. Combustion and incineration processes: Applications in environmental engineering. 4th ed. Boca Raton: CRC Press.
- Norinaga, K., T. Shoji, S. Kudo, and J.-I. Hayashi. 2013/01. Detailed chemical kinetic modelling of vapour-phase cracking of multi-component molecular mixtures derived from the fast pyrolysis of cellulose. Fuel 103: 141–50. doi:https://doi.org/10.1016/j.fuel.2011.07.045.
- Nunn, T. R., J. B. Howard, J. P. Longwell, and W. A. Peters. 1985/07. Product compositions and kinetics in the rapid pyrolysis of milled wood lignin. Industrial & Engineering Chemistry Process Design and Development 24(3):844–52. doi:https://doi.org/10.1021/i200030a054.
- Ostaszewski, D. 2019. PFAS source emission testing procedures: A pollutant in search of a method. In International Conference on Thermal Treatment Technologies (IT3) & Hazardous Waste Combustors, League City, TX: Air & Waste Management Association.
- Patterson, G. K., E. L. Paul, S. M. Kresta, and A. W. Etchells. 2004. Mixing and chemical reactions. In Handbook of industrial mixing, ed. E. L. Paul, V. A. Atiemo-Obeng, and S. M. Kresta, 755–867. Hoboken, NJ: John Wiley & Sons, Inc.
- Pinto, F., C. Franco, R. N. André, C. Tavares, M. Dias, I. Gulyurtlu, and I. Cabrita. 2003. Effect of experimental conditions on co-gasification of coal, biomass and plastics wastes with air/steam mixtures in a fluidized bed system. Fuel 82 (15–17):1967–76. doi: https://doi.org/10.1016/S0016-2361(03)00160-1.
- Prakash, N., and T. Karunanithi. 2008. Kinetic modeling in biomass pyrolysis – A Review. Journal of Applied Sciences Research 4 (12):1627–36.
- Puts, G., P. Crouse, and B. Ameduri, “Thermal degradation and pyrolysis of polytetrafluoroethylene,” in Handbook of Fluoropolymer Science and Technology, D. W. Smith, S. T. Iacono, and S. S. Iyer Eds. Hoboken, NJ: John Wiley & Sons, Inc., 2014, ch. 5, pp. 81–104.
- Quadram Institute. 2019. McCance and Widdowson’s composition of foods integrated dataset (Last updated 25 March 2019). Public Health England. Accessed May 7, 2020.https://www.gov.uk/government/publications/composition-of-foods-integrated-dataset-cofid
- Ranzi, E., T. Faravelli, and F. Manenti. 2016. Chapter one - Pyrolysis, gasification, and combustion of solid fuels. In Thermochemical Process Engineering, ed. K. M. Van Geem, 49, 1–94 (Advances in Chemical Engineering). Cambridge, MA: Academic Press.
- Rasmussen, C. L., J. Hansen, P. Marshall, and P. Glarborg. 2008. Experimental measurements and kinetic modeling of CO/H2/O2/NOx conversion at high pressure. International Journal of Chemical Kinetics 40 (8):454–80. doi:https://doi.org/10.1002/kin.20327.
- Reid, R. C., J. M. Prausnitz, and T. K. Sherwood. 1977. The properties of gases and liquids, 3rd ed., ch. 11, 548–53; appendix C, 678–79 (McGraw-Hill Chemical Engineering Series). New York: McGraw-Hill
- Risha, K., J. Flaherty, R. Wille, W. Buck, F. Morandi, and T. Isemura. 2005/03. Method for trace level analysis of C8, C9, C10, C11, and C13 perfluorocarbon carboxylic acids in water. Anal. Chem. 77(5):1503–08. doi:https://doi.org/10.1021/ac0490548.
- Rubey, W. A. 1980. Design considerations for a thermal decomposition analytical system (EPA-600/2-80-098). Cincinnati: U.S. Environmental Protection Agency.
- Rubey, W. A., and R. A. Carnes. 1985. Design of a tubular reactor instrumentation assembly for conducting thermal decomposition studies. Review of Scientific Instruments 56 (9):1795–98. doi:https://doi.org/10.1063/1.1138096.
- Rubey, W. A., and R. A. Grant. 1988. Design aspects of a modular instrumentation system for thermal diagnostic studies. Review of Scientific Instruments 59 (2):265–69. doi:https://doi.org/10.1063/1.1140238.
- Ryu, C., D. Shin, and S. Choi. 2002. Combined simulation of combustion and gas flow in a grate-type incinerator. J. Air Waste Manage. Assoc. 52 (2):189–97. doi:https://doi.org/10.1080/10473289.2002.10470769.
- Sawyer, C. N., and P. L. McCarty. 1978. Chemistry for Environmental Engineering, 3rd ed. (McGraw Hill Series in Water Resources and Environmental Engineering). New York: McGraw-Hill.
- Shen, D. K., S. Gu, and A. V. Bridgwater. 2010/03. Study on the pyrolytic behaviour of xylan-based hemicellulose using TG–FTIR and Py–GC–FTIR. J Anal Appl Pyrolysis 87(2):199–206. doi:https://doi.org/10.1016/j.jaap.2009.12.001.
- Sherwood, T. K., R. L. Pigford, and C. R. Wilke. 1975. Mass transfer (McGraw Hill Chemical Engineering Series). New York: McGraw-Hill.
- Simpson, M., J. Wei, and S. Sundaresan. 1996. Kinetics of zeolitic solid acid-catalyzed alkylation of isobutane with 2-butene. In Green chemistry: Designing chemistry for the environment, ed. P. T. Anastas and T. C. Williamson, ch. 9, 105–15 ( ACS Symposium Series, no. 626). Washington, DC: American Chemical Society.
- Simrit. 2007. Material Properties: S315 (VMQ) (Pub#2576). Plymouth, MI: Freudenberg-NOK.
- Simsek, E., B. Brosch, S. Wirtz, V. Scherer, and F. Krüll. 2009/08. Numerical simulation of grate firing systems using a coupled CFD/discrete element method (DEM). Powder Technology 193(3):266–73. doi:https://doi.org/10.1016/j.powtec.2009.03.011.
- Spalding, D. B., H. C. Hottel, S. L. Bragg, A. H. Lefebvre, D. G. Shepherd, and A. C. Scurlock. 1963. The art of partial modeling. Symposium (International) on Combustion 9 (1):833–43. doi:https://doi.org/10.1016/S0082-0784(63)80090-9.
- Speight, J. G. 2008. Fuels from biomass. In Synthetic fuels handbook: Properties, process, and performance, ch. 8. New York: McGraw-Hill.
- Spliethoff, H. 2010. Power generation from biomass and waste. In Power generation from solid fuels, 361–467. Heidelberg: Springer-Verlag.
- Stern, D. A., B. M. Myatt, J. F. Lachowski, and K. T. McGregor. 1984. Speciation of halogen and hydrogen halide compounds in gaseous emisssions. In Incineration and Treatment of Hazardous Waste: Proceedings of the Ninth Annual Research Symposium (EPA-600/9-84-015), Fort Mitchell, KY: U.S. Environmental Protection Agency, Office of Research and Development, 33–41.
- Stiles, A. B. 1977. Methanol, past, present, and speculation on the future. AIChE J. 23 (3):362–75. doi:https://doi.org/10.1002/aic.690230321.
- Sudholt, A., L. Cai, and H. Pitsch. 2019/04. Laminar flow reactor experiments for ignition delay time and species measurements at low temperatures: Linear alkanes and dimethyl ether. Combustion and Flame 202:347–61. doi:https://doi.org/10.1016/j.combustflame.2018.11.017.
- Sundström, M., J. Bogdanska, H. V. Pham, V. Athanasios, S. Nobel, A. McAlees, J. Eriksson, J. W. DePierre, and Å. Bergman. 2012. Radiosynthesis of perfluorooctanesulfonate (PFOS) and perfluorobutanesulfonate (PFBS), including solubility, partition and adhesion studies. Chemosphere 87 (8):865–71. doi:https://doi.org/10.1016/j.chemosphere.2012.01.027.
- Swithenbank, J., and V. N. Sharifi. 2013. Incinerator grate combustion phenomena. In Renewable Energy Systems, ed. M. Kaltschmitt, N. J. Themelis, L. Y. Bronicki, L. Söder, and L. A. Vega, 1135–54. New York: Springer.
- Taylor, P. H., B. Dellinger, and C. C. Lee. 1990. Development of a thermal stability-based ranking of hazardous organic compound incinerability. Environ. Sci. Technol. 24(3):316–28. doi:https://doi.org/10.1021/es00073a005.
- Taylor, P. H., T. Yamada, R. J. Giraud, M. Kaiser, and R. C. Buck, “Fate of fluorotelomer treated consumer articles in a municipal waste incinerator (poster session),” presented at the Society of Environmental Toxicology and Chemistry North America Annual Meeting, Portland, OR, 2004.
- Tchobanoglous, G., H. Theisen, and R. Eliassen. 1977. Solid wastes: Engineering principles and management issues. (McGraw-Hill Series in Water Resoures and Environmental Engineering). New York: McGraw-Hill.
- Tchobanoglous, G., H. Theisen, and S. A. Vigil. 1993. Integrated Solid Waste Management: Engineering Principles and Management Issues, (McGraw Hill Series in Water Resources and Environmental Engineering). New York: McGraw-Hill.
- Teledyne Isco. January 13, 2006. D-Series pumps installation and operation guide (Revision G). Lincoln:Teledyne Isco
- Tsang, W. 1990/11. Mechanisms for the formation and destruction of chlorinated organic products of incomplete combustion. Combustion Science and Technology 74(1–6):99–116. doi:https://doi.org/10.1080/00102209008951683.
- Tsang, W., D. R. Burgess, and V. Babushok. 1998. On the incinerability of highly fluorinated organic compounds. Combustion Science and Technology 139 (1):385–402. doi:https://doi.org/10.1080/00102209808952095.
- US Public Health Service Engineering Unit. 1944. All-glass midget impinger unit. Industrial & Engineering Chemistry Analytical Edition 16 (5): 346–346. doi:https://doi.org/10.1021/i560129a032.
- van Blijderveen, M., E. A. Bramer, and G. Brem. 2013/06. Modelling spontaneous ignition of wood, char and RDF in a lab-scale packed bed. Fuel 108:190–96. doi:https://doi.org/10.1016/j.fuel.2013.01.040
- Visalli, J. R. 1987/12. A comparison of dioxin, furan and combustion gas data from test programs at three MSW incinerators. JAPCA 37(12):1451–63. doi:https://doi.org/10.1080/08940630.1987.10466343.
- Waldner, M. H., R. Halter, A. Sigg, B. Brosch, H. J. Gehrmann, and M. Keunecke. 2013/02. Energy from waste – Clean, efficient, renewable: Transitions in combustion efficiency and NOx control. Waste Management 33(2):317–26. /01/. doi:https://doi.org/10.1016/j.wasman.2012.08.007.
- Wampler, T., Ed. 2006. Applied pyrolysis handbook. 2nded. Boca Raton: CRC Press.
- Warnatz, J. 1984. Rate coefficients in the C/H/O system. In Combustion chemistry, ed. W. C. Gardiner, ch. 5, 197–360. New York: Springer-Verlag.
- Weekman, V. W. 1974. Laboratory reactors and their limitations. AIChE J. 20 (5):833–40. doi:https://doi.org/10.1002/aic.690200502.
- Westbrook, C. K., and F. L. Dryer. 1979. Modeling of flame properties of methanol. In Proceedings of Third International Symposium on Alcohol Fuels Technology, Asilomar, CA, U.S. Department of Energy, 127–36.
- Westbrook, C. K., and F. L. Dryer. 1980/01. Prediction of laminar flame properties of methanol-air mixtures. Combustion and Flame 37:171–92. doi:https://doi.org/10.1016/0010-2180(80)90084-X.
- Westbrook, C. K., and F. L. Dryer. 1984/01. Chemical kinetic modeling of hydrocarbon combustion. Progress in Energy and Combustion Science 10(1):1–57. doi:https://doi.org/10.1016/0360-1285(84)90118-7.
- Westbrook, C. K., F. L. Dryer, and K. P. Schug. 1982/01. A comprehensive mechanism for the pyrolysis and oxidation of ethylene. Symposium (International) on Combustion 19(1):153–66. doi:https://doi.org/10.1016/S0082-0784(82)80187-2.
- White, J. 1991. Extractive sampling systems for continuous emissions monitors. In Proceedings SPIE Environmental Sensing and Combustion Diagnostics, 1434. Los Angeles: SPIE, [Online]. Available: doi:https://doi.org/10.1117/12.48471.
- Wikström, E., and S. Marklund. 1998. Combustion of an artificial municipal solid waste in a laboratory fluidised bed reactor. Waste Management & Research: The Journal for a Sustainable Circular Economy 16 (4):342–50. doi:https://doi.org/10.1177/0734242x9801600406.
- Wikström, E., M. Tysklind, and S. Marklund. 1999. Influence of variation in combustion conditions on the primary formation of chlorinated organic micropollutants during municipal solid waste combustion. Environ. Sci. Technol. 33 (23):4263–69. doi:https://doi.org/10.1021/es990568b.
- Williams, E. A., and P. T. Williams. 1997. The pyrolysis of individual plastics and a plastic mixture in a fixed bed reactor. J. Chem. Technol. Biotechnol. 70 (1):9–20. doi:https://doi.org/10.1002/(SICI)1097-4660(199709)70:1<9::AID-JCTB700>3.0.CO;2-E.
- Williams, F. A. 1985. Combustion theory: The fundamental theory of chemically reacting flow systems. 2nd ed. Boca Raton: CRC Press.
- Williams, F. A. 2003. Combustion. In Encyclopedia of physical science and technology, ed. R. A. Meyers, 3rd ed., 315–38. New York: Academic Press.
- Williams, P. T., and S. Besler. 1992. The pyrolysis of municipal solid waste. J. Inst. Energy 65 (465):192–200.
- Winter, F. 2009. The concept of chemical similarity to optimize and design high-temperature gas-solid processes. In Scale-up in combustion, ed. M. Lackner, 15–32. Vienna: ProcessEng Engineering GmbH.
- Wochele, J., and S. Stucki. 1999. Similarity laws for the tubular furnace as a model of a fixed-bed waste incinerator. Chemical Engineering & Technology 22 (3):209–12. doi:https://doi.org/10.1002/(SICI)1521-4125(199903)22:3<209::AID-CEAT209>3.0.CO;2-T.
- Woitalka, A., S. Kuhn, and K. F. Jensen. 2014/09. Scalability of mass transfer in liquid–liquid flow. Chem Eng Sci 116:1–8. doi:https://doi.org/10.1016/j.ces.2014.04.036.
- Woolf, E. J. 1993. Post-column derivatization techniques. In A practical guide to HPLC detection, ed. D. Parriott, ch. 8, 211–32. San Diego: Academic Press.
- Wu, C., and P. T. Williams. 2014. Hydrogen from waste plastics by way of pyrolysis–gasification. Proceedings of the Institution of Civil Engineers - Waste and Resource Management 167 (1):35–46. doi:https://doi.org/10.1680/warm.13.00006.
- Yamada, T., P. H. Taylor, R. C. Buck, M. A. Kaiser, and R. J. Giraud. 2005. Thermal degradation of fluorotelomer treated articles and related materials. Chemosphere 61 (7):974–84. doi:https://doi.org/10.1016/j.chemosphere.2005.03.025.
- Yang, H.-M., S. Appari, S. Kudo, J.-I. Hayashi, and K. Norinaga. 2015/07. Detailed chemical kinetic modeling of vapor-phase reactions of volatiles derived from fast pyrolysis of lignin. Ind Eng Chem Res 54(27):6855–64. doi:https://doi.org/10.1021/acs.iecr.5b01289.
- Yang, Y. B., C. Ryu, J. Goodfellow, V. N. Sharifi, and J. Swithenbank. 2004/05. Modelling waste combustion in grate furnaces. Process Safety and Environmental Protection 82(3):208–22. /01/. doi:https://doi.org/10.1205/095758204323065975.
- Yang, Y. B., H. Yamauchi, V. Nasserzadeh, and J. Swithenbank. 2003/12. Effects of fuel devolatilisation on the combustion of wood chips and incineration of simulated municipal solid wastes in a packed bed. Fuel 82(18):2205–21. doi:https://doi.org/10.1016/S0016-2361(03)00145-5.
- Zabetakis, M. G. 1965. Flammability characteristics of combustible gases and vapors. Washington, D.C: U.S. Department of the Interior, Bureau of Mines. Bureau of Mines Bulletin 627.
- Zhang, E., E. Greiner, H. Janshekar, and T. Kumamoto. 2016. Fluoropolymers chemical economics handbook. Englewood, CO: IHS Chemical.
- Zhang, K., J. Huang, G. Yu, Q. Zhang, S. Deng, and B. Wang. 2013/06. Destruction of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) by ball milling. Environ. Sci. Technol. 47(12):6471–77. doi:https://doi.org/10.1021/es400346n.
- Zhang, Y., Q. Li, and H. Zhou. 2016. Theory and calculation of heat transfer in furnaces. London: Academic Press, an imprint of Elsevier.
- Zhou, H., A. Meng, Y. Long, Q. Li, and Y. Zhang. 2014. Classification and comparison of municipal solid waste based on thermochemical characteristics. J. Air Waste Manage. Assoc. 64 (5):597–616. doi:https://doi.org/10.1080/10962247.2013.873094.