Dispersion characteristics of the plug flow hazardous waste by multiple gas jets

References

• Batarseh, F. Z., M. Gnirb, I.V. Roisman, and C. Tropea. 2009. Fluctuations of a spray generated by an air blast atomizer. Exp. Fluids 46 (6):1081–91. doi:10.1007/s00348-009-0612-y.
   Web of Science ®Google Scholar
• Brunner, C. R. 1993. Handbook of hazardous wastes incineration. second ed. New York: McGraw-Hill.
   Google Scholar
• Chu, Y., Y. Gao, and Z. Ye. 2021. Study on the spraying application in hazardous waste incineration system. Shandong Chem. Ind. 50 (4):267–69.
   Google Scholar
• Cudahy, J. 1999. Review of commercial innovative technologies for hazardous waste. Environ. Prog. 18 (4):285–92. doi:10.1002/ep.670180416.
   Google Scholar
• David, A. T. 1990. Rotary incineration systems for solid hazardous wastes. Chem. Eng. Prog. 86 (7):19–30.
   Web of Science ®Google Scholar
• Dong, Z. 1997. Impact jet. Beijing: Ocean Press.
   Google Scholar
• Dzuy, N. Q., and D. V. Boger. 1985. Direct yield stress measurement with the vane method. J. Rheol. 29 (3):335–47. doi:10.1122/1.549794.
   Web of Science ®Google Scholar
• Fan, H., Z. Li, B. Li, Li, L., Shang, S., and Wang, J. 2022. Numerical investigation of gas-assisted sludge atomization and breakup based on VOF-DPM coupled model. Chin. J. Process Eng. 22 (3):1–10.
   Google Scholar
• Fu, S., H. Ma, Z. Wu, Yang, C., and Zhang, B. 2021. Test study on spray characteristics of RP-3 aviation kerosene at low temperature. Aeroengine 47 (6):26–31.
   Google Scholar
• Gong, S., F. He, K. Liu, and X. Long. 2015. Parameter characteristics of using the high-speed air jet to impact granular material layer. J. Mech. Eng. 51 (15):142–47. doi:10.3901/JME.2015.15.142.
   Google Scholar
• Gong, S., X. Long, F. He, K. Liu, and F. He. 2016. Experiment study of high pressure air micro-pore jet’s broken dispersion effect on bulk powder. Mech. Sci. Technol. Aerosp. Eng. 35 (5):790–94.
   Google Scholar
• Guangming, G. 2018. The feeding system for the incineration of hazardous waste in rotary kiln. 2018 National Academic Annual Conference Papers Collection, Beijing. Vol. II, 5.
   Google Scholar
• Guangming, G., Z. Xiaowen, and P. J. Charnay. 2018. Development of the solid pump for transporting hazardous wastes in pipelines. Hoisting Conveying Mach. (10):101–3+133.
   Google Scholar
• Guangming, G., Z. Yan, Z. Xiaowen, W. Miao, and J. C. Pierre. 2019. A pipeline transportation pressure monitoring and warning system for hazardous waste and its performance analysis. Environ. Eng. 37 (6):136–40.
   Google Scholar
• Hartenstein, H.-U., and M. Horvay. 1996. Overview of municipal waste incineration industry in west Europe(based on the German experience). J. Hazard. Mater. 47 (1–3):19–30. doi:10.1016/0304-3894(95)00124-7.
   Web of Science ®Google Scholar
• Jakobs, T., N. Djordjevic, S. Fleck, Mancini, M., Weber, R., and Kolb, T. 2012. Gasification of high viscous slurry R&D on atomization and numerical simulation. Appl. Energy 93: 449–56. doi:10.1016/j.apenergy.2011.12.026.
   Web of Science ®Google Scholar
• Lefebver, A. H. 1989. Atomization and spray. New York: Hemisphere publishing corporation.
   Google Scholar
• Li, S., M. Li, G. Liu, and Huang, Y. 2007. Numerical simulation on the penetration depth in water of round impinging jet. Metall. Equip. 20 (1):25–28.
   Google Scholar
• Lin, H., Y. Cai, and D. Liu. 2017. Comparison on spray characteristics of nozzles used for sludge drying. Ind. Boilers 42 (3):15–19.
   Google Scholar
• Liu, P. 2008. Jet theory of free turbulent. Beijing: Beijing University of Aeronautics and Astronautics Press.
   Google Scholar
• Liu, Y., C. Chen, J. Wei, and Zhang, J. 2018a. Comparison analysis on the rock breakage pressure induced by abrasive water jets and abrasive gas jets. J. China Coal Soc. 43 (9):2510–17. doi:10.13225/j.cnki.jccs.2017.1770.
   Google Scholar
• Liu, C., L. He, and E. Guan. 2022. Study of atomization law of gas-liquid two-phase l=flow based on Laval tube. J. Dalian Univ. Technol. 62 (2):179–87.
   Google Scholar
• Liu, Y., J. Wei, D. Wang, and Liu, X. 2018b. Erosive wear characteristic of rock impacted by abrasive gas jet. J. China Coal Soc. 43 (11):3033–41. doi:10.13225/j.cnki.jccs.2017.1770.
   Google Scholar
• Liu, Y., T. Zhang, J. Wei, and Liang, B. 2017. Research on influence of abrasive shape on erosion performance of abrasive gas jet. J. Saf. Sci. Technol. 13 (11):117–22.
   Google Scholar
• Mlkvik, M., P. StaHle, H. P. Schuchmann, V. Gaukel, J. Jedelsky, and M. Jicha. 2015. Twin-fluid atomization of viscous liquids: The effect o atomizer construction on breakup process, spray stability and droplet size. Int. J. Multiphase Flow 77 (6):19–31. doi:10.1016/j.ijmultiphaseflow.2015.06.010.
   Google Scholar
• Shen, H., A. Wu, L. Jiang, Wang, Y., Jiao, H., and Liu, X. 2016. Small cylindrical slump test for unclassified tailing paste. J. Cent. S. Univ. Sci. Technol. 47 (1):204–09.
   Google Scholar
• Singh, J., D. Croce, L. E. Zerpa, Partington, B., and Gamboa, J. 2019. Experimental evaluation of nozzles to mitigate liquid loading in gas wells. J. Nat. Gas Sci. Eng. 65:248–56.
   Web of Science ®Google Scholar
• Sun, Y., L. Zhou, X. Gong, Zhang, P., and Hao, R. 2022. Numerical simulation of close-coupled annular nozzle atomization process in vacuum induction. Mater. Mech. Eng. 46 (4):75–81.
   Google Scholar
• Tian, S., and Z. Gao. 2009. Improved design of airflow distribution chamber in air-impingement oven based on fluent. Mod. Food Sci. Technol. 25 (6):612–16.
   Google Scholar
• Wu, A., H. Chen, Y. Wang, Wang, H., and Liu, X. 2016. Transport resistance characteristic of paste pipeline considering effect of wall slip. Chin. J. Nonferrous Met. 26 (1):180–87.
   Google Scholar
• Wu, A., H. Jiao, H. Wang, Li, H., Yi, H., Liu, X., and Liu, S. 2013. Yield stress measurements and optimization of paste tailings. J. Cent S. Univ. (Sci. Technol.) 44 (8):3370–76.
   Google Scholar
• Wu, A., X. Liu, H. Wang, Wang, Y., Jiao, H., and Liu, S. 2014. Resistance characteristics of structure fluid back filling slurry in pipeline transport. J. Cent S. Univ. (Sci. Technol.) 45 (12):4325–30.
   Google Scholar
• Zhang, W., Y. Yu, and Z. Zhang. 2013. Study on atomized oil sludge burning in pulverized coal boilers. Chem. Eng. Mach. 40 (3):311–5+326.
   Google Scholar
• Zhou, Z., J. Yin, S. Shi, and Hong, G. 2019. Numerical and experimental study on vertical cutting of hard clay by high pressure water jet under submerged condition. Port Waterw. Eng. 554 (4):1–6.
   Google Scholar
• Zürcher, O., D. Favrat, and J. R. Thome. 2002. Development of a diabatic two-phase flow pattern map for horizontal flow boiling. Int. J. Heat Mass Transf. 45 (2):291–301. doi:10.1016/S0017-9310(01)00146-6.
   Web of Science ®Google Scholar