The effect of heavy haul train speed on insulated rail joint bar strains

References

• Akhtar, M. 2011. “Next Generation IJs.” Railway Track and Structures 107 (5): 15–17.
   Google Scholar
• AREMA. 2017. Manual for Railway Engineering Vol. 1. Landover, MD: American Railway Engineering and Maintenance-of-Way Association.
   Google Scholar
• Askarinejad, H., M. Dhanasekar, and C. Cole. 2013. “Assessing the Effects of Track Input on the Response of Insulated Rail Joints Using Field Experiments.” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 227 (2): 176–187. doi:10.1177/0954409712458496.
   Web of Science ®Google Scholar
• Chen, Yung-Chuan, and Li-Wen Chen. 2005. “Effects of Insulated Rail Joint on the Wheel/Rail Contact Stresses under the Condition of Partial Slip.” Wear 260 (11–12): 1267–1273. doi:10.1016/j.wear.2005.08.005.
   Web of Science ®Google Scholar
• Costa, P. A., A. Colaço, R. Calçada, and A. S. Cardoso. 2014. “Critical Speed of Railway Tracks. Detailed and Simplified Approaches.” Transportation Geotechnics 2: 30–46.
   Web of Science ®Google Scholar
• Dahlberg, T. 2010. “Railway Track Stiffness Variations – Consequences and Countermeasures.” International Journal of Civil Engineering 8 (1): 12.
   Web of Science ®Google Scholar
• Davis, D., and M. Akhtar. 2007. “Improved Insulated Rail Joints for High Tonnage Lines with Heavy-Axle Loads.” Railway Track & Structures 24–29.
   Google Scholar
• Dhanasekar, M., and W. Bayissa. 2012. “Performance of Square and Inclined Insulated Rail Joints Based on Field Strain Measurements.” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 226 (2): 140–154.10.1177/0954409711415898
   Web of Science ®Google Scholar
• Dornan, J., P. Kain, and J. Ryan. 2014. Trainline 2 Statistical Report. Canberra: Bureau of Infrastructure, Transport and Regional Economics and Australasian Railway Association.
   Google Scholar
• Hetényi, M. 1946. Beams on Elastic Foundation. Ann Arbor, MI: University of Michigan Press.
   Google Scholar
• Himebaugh, A. 2006. Finite Element Analysis of Insulated Railroad Joints. Blacksburg, VA: Master of Science, Civil Engineering, Virginia Polytechnic Institute and State University.
   Google Scholar
• Kerr, A., and J. Cox. 1999. “Analysis and Tests of Boned Insulted Rail Joints Subjected to Vertical Wheel Loads.” International Journal of Mechanical Sciences 41 (10): 1253–1272. doi:10.1016/s0020-7403(98)00042-3.
   Web of Science ®Google Scholar
• Liu, X., M. Saat, and C. Barkan. 2012. “Analysis of Causes of Major Train Derailment and Their Effect on Accident Rates.” Transportation Research Record: Journal of the Transportation Research Board 2289: 154–163.10.3141/2289-20
   Web of Science ®Google Scholar
• Mandal, N., M. Dhanasekar, and Y. Sun. 2014. “Impact Forces at Dipped Rail Joints.” Proceedings of the Institution of Mechanical Engineers, Part F Journal of Rail and Rapid Transit 230 (1): 271–282. doi:10.1177/0954409714537816.
   Web of Science ®Google Scholar
• Mandal, N., and B. Peach. 2010. “An Engineering Analysis of Insulated Joints: A General Perspective.” International Journal of Enginering Science and Technology 2 (8): 3964–3988.
   Google Scholar
• MATLAB R. 2017. Natick, MA.
   Google Scholar
• Mayers, A, and M. Dhanasekar. 2012. “Measurement of In-service Insulated Rail Joint Tie Plate Response.” Conference on Rail Engineering (CORE), Brisbane, September 10–12.
   Google Scholar
• Mutton, P., C. Thompson, M. Hanna, S. Oswald, and L. Wessels. 2012. “Comparative Assessment of Insulated Rail Joint Assemblies.” Conference on Rail Engineering (CORE), Brisbane.
   Google Scholar
• Oregui, M., M. Molodova, A. Núñez, R. Dollevoet, and Z. Li. 2015. “Experimental Investigation into the Condition of Insulated Rail Joints by Impact Excitation.” Experimental Mechanics 55: 1597–1612.10.1007/s11340-015-0048-7
   Web of Science ®Google Scholar
• Plaut, R., H. Lohse-Busch, A. Eckstein, S. Lambrecht, and D. Dillard. 2007. “Analysis of Tapered, Adhesively Bonded, Insulated Rail Joints.” Proceedings of the Institute of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 221 (2): 195–204.
   Web of Science ®Google Scholar
• Sayeed, Md Abu, and Mohamed A. Shahin. 2016. “Investigation into Impact of Train Speed for Behavior of Ballasted Railway Track Foundations.” 3rd International Conference on Transportation Geotechnics, ICTG 2016, Guimaraes, September 4–7.
   Google Scholar
• Soylemez, E, and K. Cilogu. 2016. “Influence of Track Variables and Product Design on Insulated Rail Rail Joints.” Transportation Research Record: Journal of the Transportation Research Board (No. 2545): 1–10. doi: 10.3141/2545-01.
   Google Scholar
• Standards Australia. 2002. AS1085.12: Railway Track Material Part 12: Insulated Joint Assemblies. Sydney: Standards Australia International.
   Google Scholar
• Talamini, B., D. Jeong, and J. Gordon. 2007. “Estimating Joint Bar Fatigue Life.” Railway Track & Structures 49–55.
   Google Scholar
• Zong, N., and M. Dhanasekar. 2013. “Hybrid Genetic Algorithm for Elimination of Severe Stress Concentration in Railhead Ends.” Journal of Computing in Civil Engineering 29 (3). 04014075. doi:10.1061/(ASCE)CP.1943-5487.0000374.
   Web of Science ®Google Scholar
• Zong, N., and M. Dhanasekar. 2017. “Sleeper Embedded Insulated Rail Joints for Minimising the Number of Modes of Failure.” Engineering Failure Analysis 76: 27–43.10.1016/j.engfailanal.2017.02.001
   Web of Science ®Google Scholar
• Zong, N., D. Wexler, and M. Dhanasekar. 2013. “Structural and Material Characterisation of Insulated Rail Joints.” Electronic Journal of Structural Engineering 13: 75–87.
   Google Scholar