References
- ACI. 209R. 1992. Prediction of Creep, Shrinkage, and Temperature Effect in Concrete Structures. Farmington Hills.
- ACI318-14. 2014. Building Code Requirements for Structural Concrete (ACI 318-14). 519. Michigan: American Concrete Institute, Framington Hills.
- ACI440.1IR-06. 2006. Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars. Farmington Hills.
- Al-Mahaidi, R, and AKY. Hii. 2007. “Bond Behaviour of CFRP Reinforcement for Torsional Strengthening of Solid and box-section RC Beams.” Composites Part B 38 (5–6): 727–735. doi:10.1016/j.compositesb.2006.06.018.
- Anna Polak, M. 2005. “Shell Finite Element Analysis of RC Plates Supported on Columns for Punching Shear and Flexure.” Engineering Computations 22 (5–6): 720–731. doi:10.1108/02644400510598750.
- ASTM C39-14a. 2014. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. West Conshohocken: ASTM International.
- ASTM C469. 2002. Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. West Conshohocken, United States: American Society for Testing and Materials International.
- ASTM C496-11. 2011. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. West Conshohocken, United States.
- ASTMA370-16. 2016. Standard Test Methods and Definitions for Mechanical Testing of Steel Products. West Conshohocken: PA. ASTM International.
- Barros, JAO, M Rezazadeh, JPS Laranjeira, MRM Hosseini, M Mastali, and H. Ramezansefat. 2017. “Simultaneous Flexural and Punching Strengthening of RC Slabs according to a New Hybrid Technique Using U-shape CFRP Laminates.” Composite Structures 159: 600–614. doi:10.1016/j.compstruct.2016.10.009.
- CEB-FIP Model Code 1990 Design code. 1993. London. Lausanne,Switzerland: Thomas Telford
- Cervenka, V, L Jendele, and J. Cervenka. 2018. Atena Program Documentation, Part 1. Cervenka Consulting. Prague.
- Coelho, MRF, JM Sena-Cruz, and LAC. Neves. 2015. “A Review on the Bond Behavior of FRP NSM Systems in Concrete.” Construction and Building Materials 93: 1157–1169. doi:10.1016/j.conbuildmat.2015.05.010.
- Erdogan, H, B Binici, and G. Ozcebe. 2010. “Punching Shear Strengthening of flat-slabs with CFRP Dowels.” Magazine of Concrete Research 62 (7): 465–478. doi:10.1680/macr.2010.62.7.465.
- Fernandez, M, and A. Muttoni. 2009. “Applications of Critical Shear Crack Theory to Punching of Reinforced Concrete Slabs with Transverse Reinforcement.” ACI Structural Journal 106: 485–494.
- Fernández, M, A Muttoni, and K. Jakob. 2010. “Strengthening of Flat Slabs against Punching Shear Using Post-Installed Shear Reinforcement.” Structural Journal- 107: 434–442.
- Genikomsou, AS, and MA. Polak. 2015. “Finite Element Analysis of Punching Shear of Concrete Slabs Using Damaged Plasticity Model in ABAQUS.” Engineering Structures 98: 38–48. doi:10.1016/j.engstruct.2015.04.016.
- Genikomsou, AS, and MA. Polak. 2016. “Finite-element Analysis of Reinforced Concrete Slabs with Punching Shear Reinforcement.” Journal of Structural Engineering 142: 1–15. doi:10.1061/(ASCE)ST.1943-541X.0001603.
- Goh, CYM, and TD. Hrynyk. 2018. ““Numerical Investigation of the Punching Resistance of Reinforced Concrete Flat Plates.” Journal of Structural Engineering.” 144 (10): 04018166. doi:10.1061/(ASCE)ST.1943-541X.0002142.
- Guan, H, and MA. Polak. 2007. “Finite Element Studies of Reinforced Concrete Slab - Edge Column Connections with Openings.” Canadian Journal of Civil Engineering 34 (8): 952–965. doi:10.1139/l06-169.
- Guandalini, S, OL Burdet, and A. Muttoni. 2009. “Punching Tests of Slabs with Low Reinforcement Ratios.” ACI Structural Journal 106: 87–95.
- Hueste, MBD, and JK. Wight. 1999. “Nonlinear Punching Shear Failure Model for Interior slab-column Connections.” Journal of Structural Engineering 125 (9): 997–1008. doi:10.1061/(ASCE)0733-9445(1999)125:9(997).
- Muttoni, A, and J. Schwartz. 1991. “Behavior of Beams and Punching in Slabs without Shear Reinforcement.” IABSE Colloquium 62: 703–708.
- Muttoni, A. 2003. “Shear and Punching Strength of Slabs without Shear Reinforcement.” Beton-und Stahlbetonbau 98 (2): 74–84. doi:10.1002/best.200300400.
- Navarro, M, S Ivorra, and FB. Varona. 2018. “Parametric Computational Analysis for Punching Shear in RC Slabs.” Engineering Structures 165: 254–263. doi:10.1016/j.engstruct.2018.03.035.
- Pham, H, and R. Al-Mahaidi. 2007. “Modelling of CFRP-concrete shear-lap Tests.” Construction Building Material 21 (4): 727–735. doi:10.1016/j.conbuildmat.2006.06.012.
- Popovics, S. 1973. “A Numerical Approach to the Complete Stress-Strain Curve of Concrete.” Cement and Concrete Research 3 (5): 583–599. doi:10.1016/0008-8846(73)90096-3.
- Saleh, H, K Abdouka, R Al-Mahaidi, and R. Kalfat. 2018a. “Strengthening of slab–column Connections against Punching Shear Using FRP Materials: State-of-the-art Review.” Australian Journal of Structural Engineering 19 (3): 188–206. doi:10.1080/13287982.2018.1462901.
- Saleh, H, R Kalfat, K Abdouka, and R. Al-Mahaidi. 2018b. “Experimental and Numerical Study into the Punching Shear Strengthening of RC Flat Slabs Using post-installed Steel Bolts.” Construction and Building Materials 188: 28–39. doi:10.1016/j.conbuildmat.2018.08.064.
- Saleh, H, R Kalfat, K Abdouka, and R. Al-Mahaidi. 2019. “Punching Shear Strengthening of RC Slabs Using L-CFRP Laminates.” Engineering Structures 194: 274–289. doi:10.1016/j.engstruct.2019.05.050.
- Shiqi, C, W Jinshan, S Lei, and L. Yan. 2009. “Test and FEM Analysis of Debonding Failure of RC Beam Strengthened with CFRP.” Journal of Reinforced Plastics and Composites 28 (17): 2151–2160. doi:10.1177/0731684408091932.