A novel approach to alloy-based bonding for piezoelectric sensor integrated in impedance-based structural health monitoring

References

• Abuzaid, A., M. S. Dawood, and M. Hrairi. 2015. “Effects of Adhesive Bond on Active Repair of Aluminium Plate Using Piezoelectric Patch.” Applied Mechanics & Materials. translated by Tech Publications Ltd799:788–793. https://doi.org/10.4028/www.scientific.net/AMM.799-800.788.
   Google Scholar
• Ai, D., and H. Zhu. 2022. “Adhesive Curing Effect of Bonded Piezoelectric Transducer on Electromechanical Impedance-Based Concrete Structural Damage Detection.” Structural Health Monitoring: 1–18. https://doi.org/10.1177/14759217221118514.
   Web of Science ®Google Scholar
• Ali, R., D. R. Mahapatra, and S. Gopalakrishnan. 2004. “An Analytical Model of Constrained Piezoelectric Thin Film Sensors.” Sensors and Actuators A: Physical 116 (3): 424–437. https://doi.org/10.1016/j.sna.2004.05.028.
   Web of Science ®Google Scholar
• Annamdas, V. G. M. 2007. Characterization of smart PZT transducer and admittance signatures using PZT-structure interaction models for structural health monitoring. PhD Thesis, Nanyang Technological University, Singapore.
   Google Scholar
• Annamdas, V. G. M., and P. Rizzo. 2009. “Influence of the Excitation Frequency in the Electromechanical Impedance Method for SHM Applications.” In Smart Sensor Phenomena, Technology, Networks, and Systems, edited by Norbert G. Meyendorf, Kara J. Peters, Wolfgang Ecke. Vol. 7293. International Society for Optics and Photonics.
   Google Scholar
• Baker, A. A. 2004. Composite Materials for Aircraft Structures. 3rd. American Institute of Aeronautics & Astronautics.
   Google Scholar
• Banerjee, T., and S. Moharana, 2022. “Monitoring Thermal Defects in Rail and Rail Joints Using Piezo Impedance-Based Structural Health Monitoring (PISHM).” Engineering Research Express 4 (1): 015014.
   Google Scholar
• Bhalla, S., A. S. K. Naidu, C. W. Ong, and C. K. Soh. 2002. “Practical Issues in the Implementation of Electromechanical Impedance Technique for NDE.” In Smart Structures, Devices, and Systems, edited by Erol C. Harvey, Derek, Abbott, Vijay K. Varadan, 484–494. Vol. 4935. International Society for Optics and Photonics.
   Google Scholar
• Blackshire, J. L., and A. Cooney. 2006. “Evaluation and Improvement in Sensor Performance and Durability for Structural Health Monitoring Systems.” In Advanced Sensor Technologies for Nondestructive Evaluation and Structural Health Monitoring II, edited by Norbert, Meyendorf, George Y., Baaklini, Bernd, Michel,137–146. Vol. 6179. SPIE.
   Google Scholar
• Blackshire, J. L., V. Giurgiutiu, A. Cooney, and J. Doane. 2005. “Characterization of Sensor Performance and Durability for Structural Health Monitoring Systems.” Advanced Sensor Technologies for Nondestructive Evaluation and Structural Health Monitoring, edited by Norbert Meyendorf, George Y. Baaklini, Bernd Michel, 66–75. Vol. 5770. SPIE.
   Google Scholar
• Chetwynd, D., F. Mustapha, K. Worden, & J. Rongong 2006. Damage Detection in Plates Using Transducers Mounted on Viscoelastic Damping Layers. In Proceedings of the 3rd European Workshop Structural Health Monitoring, Granada Spain. 300–307.
   Google Scholar
• Civera, M., and C. Surace. 2022. “Non-Destructive Techniques for the Condition and Structural Health Monitoring of Wind Turbines: A Literature Review of the Last 20 Years.” Sensors 22 (4): 1627. https://doi.org/10.3390/s22041627.
   PubMed Web of Science ®Google Scholar
• Crawley, E. F., and J. De Luis. 1987. “Use of Piezoelectric Actuators as Elements of Intelligent Structures.” AIAA Journal 25 (10): 1373–1385. https://doi.org/10.2514/3.9792.
   Web of Science ®Google Scholar
• Du, Y., W. Du, D. Lin, M. Ai, S. Li, and L. Zhang 2023. “Recent Progress on Hydrogel-Based Piezoelectric Devices for Biomedical Applications.” Micromachines 14 (1): 167. https://doi.org/10.3390/mi14010167.
   PubMed Web of Science ®Google Scholar
• Gandhi, M. V., and B. D. Thompson. 1992. Smart Materials and Structures. Springer Dordrecht: Springer Science & Business Media.
   Google Scholar
• Guo, Y. Q., J. Zhang, and X. H. Huang. 2019. “The Development and Tests of Remote Data Acquisition and Transmission System on Civil Engineering Structural Vibration.” Journal of Asian Architecture and Building Engineering 18 (1): 9–15. https://doi.org/10.1080/13467581.2019.1585861.
   Web of Science ®Google Scholar
• Han, L., X. D. Wang, and Y. Sun. 2008. “The Effect of Bonding Layer Properties on the Dynamic Behaviour of Surface-Bonded Piezoelectric Sensors.” International Journal of Solids and Structures 45 (21): 5599–5612. https://doi.org/10.1016/j.ijsolstr.2008.06.003.
   Web of Science ®Google Scholar
• Harper, C. A. 2001. “Handbook of Ceramics, Glasses, and Diamonds.”
   Google Scholar
• Hormadaly, J. 2012. Printed Films: Materials Science and Applications in Sensors, Electronics and Photonics. Elsevier Science.
   Google Scholar
• Lin, M., and F. K. Chang. 2002. “The Manufacture of Composite Structures with a Built-In Network of Piezoceramics.” Composites Science and Technology 62 (7–8): 919–939. https://doi.org/10.1016/S0266-3538(02)00007-6.
   Web of Science ®Google Scholar
• Micro-Measurements, V. 2005. “Strain Gage Installations with M-Bond 200 Adhesive.” Instruction Bulletin B-127-14:1–4.
   Google Scholar
• Mittal, K. L., V. A. N. Ooij, W. J., and H. R. Anderson 1998. “First International Congress on Adhesion Science and Technology: Invited Papers : Festschrift in Honor of Dr.” K.L. Mittal on the Occasion of His 50th Birthday, VSP.
   Google Scholar
• Moharana, S. 2012. “Modelling of Piezo-Structure Elastodynamic Interaction Through Bond Layer for Electro-Mechanical Impedance Technique.”
   Google Scholar
• Moharana, S., and S. Bhalla. 2014. “A Continuum Based Modelling Approach for Adhesively Bonded Piezo-Transducers for EMI Technique.” International Journal of Solids and Structures 51 (6): 1299–1310.
   Web of Science ®Google Scholar
• Moharana, S., and S. Bhalla. 2015. “Influence of Adhesive Bond Layer on Power and Energy Transduction Efficiency of Piezo-Impedance Transducer.” Journal of Intelligent Material Systems and Structures 26 (3): 247–259. https://doi.org/10.1177/1045389X14523858.
   Web of Science ®Google Scholar
• Mustapha, S., and L. Ye “Bonding Piezoelectric Wafers for Application in Structural Health Monitoring–Adhesive Selection”. Research in Nondestructive Evaluation 26 (1): 23–42.
   Web of Science ®Google Scholar
• Nguyen, B. P., Q. H. Tran, T. T. Nguyen, A. M. Pradhan, and T. C. Huynh. 2021. “Understanding Impedance Response Characteristics of a Piezoelectric-Based Smart Interface Subjected to Functional Degradations.” Complexity 1–24.
   Web of Science ®Google Scholar
• Park, G., D. J. Inman, and C. R. Farrar. 2003. “Recent Studies in Piezoelectric Impedance-Based Structural Health Monitoring.” Structural Health Monitoring 24 (16): 1423–1430.
   Google Scholar
• Park, G., H. Sohn, C. R. Farrar, and D. J. Inman. 2003. “Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward.” The Shock & Vibration Digest 35 (6): 451–464. https://doi.org/10.1177/05831024030356001.
   Google Scholar
• Parpe, A., and T. J. Saravanan. 2021. “New Refined Analytical Models for Various Bonding Conditions of an Adhesively Bonded Smart PZT Transducer Using the EMI Technique.” Smart Materials and Structures 30 (12): 125015. https://doi.org/10.1088/1361-665X/ac32e9.
   Web of Science ®Google Scholar
• Pietrzakowski, M. 2001. “Active Damping of Beams by Piezoelectric System: Effects of Bonding Layer Properties.” International Journal of Solids and Structures 38 (44–45): 7885–7897. https://doi.org/10.1016/S0020-7683(01)00105-6.
   Web of Science ®Google Scholar
• Qiao, L., W. Yan, and S. Cao. 2023. “Inverse Analysis for Damage Detection in a Rod Using EMI Method.” Mechanics of Advanced Materials and Structures 30 (1): 168–174. https://doi.org/10.1080/15376494.2021.2010845.
   Web of Science ®Google Scholar
• Qing, X. P., S. J. Beard, A. Kumar, and R. Hannum. 2006. “A Real-Time Active Smart Patch System for Monitoring the Integrity of Bonded Repair on an Aircraft Structure.” Smart Materials and Structures 15 (3): N66. https://doi.org/10.1088/0964-1726/15/3/N03.
   Google Scholar
• Qing, X. P., A. Kumar, S. Beard, P. Yu, D. Zhang, C. Liu, & R. Hannum 2006. Advanced Self-Sufficient Structural Health Monitoring System. In Proceedings of the Third European Workshop on Structural Health Monitoring, Granada, Spain, pp. 5–7.
   Google Scholar
• Saravanan, T. J., and S. S. Chauhan. 2022. “Study on Pre-Damage Diagnosis and Analysis of Adhesively Bonded Smart PZT Sensors Using EMI Technique.” Measurement 188:110411. https://doi.org/10.1016/j.measurement.2021.110411.
   Web of Science ®Google Scholar
• Sbarufatti, C., M. Corbetta, A. Manes, and M. Giglio. 2014. “Real-Time Sequential Monte Carlo Sampling Based on a Committee of Artificial Neural Networks for Residual Lifetime Prediction of a Component Subjected to Fatigue Crack Growth.” Procedia Engineering 74. 347–351.
   Google Scholar
• Sbarufatti, C., A. Manes, and M. Giglio. 2014. “Application of Sensor Technologies for Local and Distributed Structural Health Monitoring.” Structural Control and Health Monitoring 21 (7): 1057–1083. https://doi.org/10.1002/stc.1632.
   Web of Science ®Google Scholar
• Schubert, K. J., and A. S. Herrmann. 2012. “On the Influence of Moisture Absorption on Lamb Wave Propagation and Measurements in Viscoelastic CFRP Using Surface Applied Piezoelectric Sensors.” Composite Structures 94 (12): 3635–3643. https://doi.org/10.1016/j.compstruct.2012.05.029.
   Web of Science ®Google Scholar
• Singh, S. K., and R. Shanker. 2022. “Determining the Sensing Region of Surface Bonded PZT Sensor and Surface Mounted PZT Sensor in Electro-Mechanical Impedance Technique for Non-Destructive Testing.” Russian Journal of Nondestructive Testing 58 (10): 934–949.
   Web of Science ®Google Scholar
• Sohn, H., C. R. Farrar, F. M. Hemez, D. D. Shunk, D. W. Stinemates, B. R. Nadler, and J. J. Czarnecki. 2002. A Review of Structural Health Monitoring Literature: 1996–2001, 1. USA: Los Alamos National Laboratory.
   Google Scholar
• Soh, C. K., Y. Yang, and S. Bhalla. 2012. Smart Materials in Structural Health Monitoring, Control and Biomechanics. Springer Science & Business Media. https://doi.org/10.1007/978-3-642-24463-6.
   Google Scholar
• Srivastava, S., S. Prakash, S. Tripathi, and S. Bhalla. 2023. “Enhancement of Non-Bonded Piezo Sensor Mechanism for Osteoporosis Detection.” In Emerging Trends in Mechanical and Industrial Engineering. Lecture Notes in Mechanical Engineering, edited by X. Li, M. M. Rashidi, R. S. Lather, and R. Raman, Vol. 76 1001–1008. Singapore: Springer. https://doi.org/10.1007/978-981-19-6945-4_76.
   Google Scholar
• Sun, H., Y. Wang, X. Qing, and Z. Wu. 2018. “High Strain Survivability of Piezoceramics by Optimal Bonding Adhesive Design.” Sensors 18 (8): 2554. https://doi.org/10.3390/s18082554.
   PubMed Web of Science ®Google Scholar
• Van den Ende, D. A., B. Bos, W. A. Groen, and L. M. J. G. Dortmans. 2009. “Lifetime of Piezoceramic Multilayer Actuators: Interplay of Material Properties and Actuator Design.” Journal of Electroceramics 22 (1): 163–170. https://doi.org/10.1007/s10832-007-9411-0.
   Web of Science ®Google Scholar
• Veidt, M., T. Liu, and S. Kitipornchai. 2000. “Experimental Investigation of the Acousto-Ultrasonic Transfer Characteristics of Adhesively Bonded Piezoceramic Transducers.” Smart Materials and Structures 9 (1): 19. https://doi.org/10.1088/0964-1726/9/1/303.
   Web of Science ®Google Scholar
• Vodicka, R., and S. C. Galea 1998. “Use of PVDF Strain Sensors for Health Monitoring of Bonded Composite Patches.” In DSTO Aeronautical and Maritime Research Laboratory. DSTO Aeronuatical and Maritime Research Laboratory.
   Google Scholar
• Wang, L., S. Nagarajaiah, W. Shi, and Y. Zhou. 2021. “Semi-Active Control of Walking-Induced Vibrations in Bridges Using Adaptive Tuned Mass Damper Considering Human-Structure-Interaction.” Engineering Structures 1 (244): 112743. https://doi.org/10.1016/j.engstruct.2021.112743.
   Google Scholar
• Wang, L., S. Nagarajaiah, W. Shi, and Y. Zhou. 2022. “Seismic Performance Improvement of Base-Isolated Structures Using a Semi-Active Tuned Mass Damper.” Engineering Structures 15 (271): 114963. https://doi.org/10.1016/j.engstruct.2022.114963.
   Google Scholar
• Wang, L., S. Nagarajaiah, Y. Zhou, and W. Shi. 2023. “Experimental Study on Adaptive-Passive Tuned Mass Damper with Variable Stiffness for Vertical Human-Induced Vibration Control.” Engineering Structures 1 (280): 115714. https://doi.org/10.1016/j.engstruct.2023.115714.
   Google Scholar
• Wang, L., W. Shi, X. Li, Q. Zhang, and Y. Zhou. 2019. “An Adaptive‐Passive Retuning Device for a Pendulum Tuned Mass Damper Considering Mass Uncertainty and Optimum Frequency.” Structural Control and Health Monitoring 26 (7): e2377. https://doi.org/10.1002/stc.2377.
   Web of Science ®Google Scholar
• Wang, L., W. Shi, Q. Zhang, and Y. Zhou. 2020. “Study on Adaptive-Passive Multiple Tuned Mass Damper with Variable Mass for a Large-Span Floor Structure.” Engineering Structures 15 (209): 110010. https://doi.org/10.1016/j.engstruct.2019.110010.
   Google Scholar
• Wang, L., W. Shi, Y. Zhou, and Q. Zhang. 2020. “Semi-Active Eddy Current Pendulum Tuned Mass Damper with Variable Frequency and Damping.” Smart Structures and Systems 25 (1): 65–80.
   Web of Science ®Google Scholar
• Wang, L., Y. Zhou, S. Nagarajaiah, and W. Shi. 2023. “Bi-Directional Semi-Active Tuned Mass Damper for Torsional Asymmetric Structural Seismic Response Control.” Engineering Structures 1 (294): 116744. https://doi.org/10.1016/j.engstruct.2023.116744.
   Google Scholar
• Wang, L., Y. Zhou, and W. Shi. 2023a. “Seismic Control of a Smart Structure with Semiactive Tuned Mass Damper and Adaptive Stiffness Property.” Earthquake Engineering and Resilience 2 (1): 74–93. https://doi.org/10.1002/eer2.38.
   Google Scholar
• Wang, L., Y. Zhou, and W. Shi2023bSeismic Response Control of a Nonlinear Tall Building Under Mainshock-Aftershock Sequences Using Semi-Active Tuned Mass DamperInternational Journal of Structural Stability and Dynamics org10.1142 S. 2023 Jul 14https://doi.org/10.1142/S0219455423400278
   Web of Science ®Google Scholar
• Wei, C. Y., C. C. Ye, S. W. James, R. P. Tatam, and P. E. Irving, An Experimental Approach to Quantify Strain Transfer Efficiency of Fibre Bragg Grating Sensors to Host Structures, The 13th International Conference on Composite Materials ICCM-13, Beijing, China, June 25-29, 2001.
   Google Scholar
• Winston, H. A., F. Sun, and B. S. Annigeri. 2001. “Structural Health Monitoring with Piezoelectric Active Sensors.” Journal of Engineering for Gas Turbines and Power 123 (2): 353–358. https://doi.org/10.1115/1.1365123.
   Web of Science ®Google Scholar
• Xu, X. H., and J. R. Chu. 2008. “Preparation of a High-Quality PZT Thick Film with Performance Comparable to Those of Bulk Materials for Applications in MEMS.” Journal of Micromechanics and Microengineering 18 (6): 065001. https://doi.org/10.1088/0960-1317/18/6/065001.
   Web of Science ®Google Scholar
• Zagrai, A. N., and V. Giurgiutiu 2001. “Electro-Mechanical Impedance Method for Crack Detection in Thin Plates.” Journal of Intelligent Material Systems and Structures 12:709–718.
   Web of Science ®Google Scholar
• Zhang, H., L. Wang, and W. Shi. 2023. “Seismic Control of Adaptive Variable Stiffness Intelligent Structures Using Fuzzy Control Strategy Combined with LSTM.” Journal of Building Engineering 78:107549. https://doi.org/10.1016/j.jobe.2023.107549.
   Web of Science ®Google Scholar
• Zhili, L., H. Lei, W. Yunxin, & Z. Jue 2005. Experiment Study of Temperature Parameter Effect on Bonding Process and Quality in Thermosonic Wire Bonding. In 2005 6th International Conference on Electronic Packaging Technology, Shenzhen, China. 408–413. IEEE.
   Google Scholar
• Ziss, D., J. Martín-Sánchez, T. Lettner, A. Halilovic, G. Trevisi, R. Trotta, and J. Stangl. 2017. “Comparison of Different Bonding Techniques for Efficient Strain Transfer Using Piezoelectric Actuators.” Journal of Applied Physics 121 (13): 135303. https://doi.org/10.1063/1.4979859.
   PubMed Web of Science ®Google Scholar