Experimental and numerical studies for the performance verification of post-installed anchors used in electrical cabinet fixation

References

• ASTM E. 2003. Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements, 488–496. West Conshohocken, PA, USA: ASTM International.
   Google Scholar
• Chowdhury, M. A., M. D. Nuruzzaman, M. Arefin Kowser, M. MostafizurRahman, K. B. Roy, S. Chakraborty, N. Mohammad, M. Aktaruzzaman, and N. Mohammad. 2014. “Sliding Friction of Steel Combinations.” The Open Mechanical Engineering Journal 8 (1): 364–369. https://doi.org/10.2174/1874155X01408010364.
   Google Scholar
• Chung, Y. H., K. J. Hong, and S. O. Cho. 2020. “Rocking Stiffness of Electrical Cabinet for In-Cabinet Response Spectrum.” Journal of the Earthquake Engineering Society of Korea 24 (2): 95–102. https://doi.org/10.5000/EESK.2020.24.2.095.
   Google Scholar
• Di Sarno, L., G. Magliulo, D. D’Angela, and E. Cosenza. 2019. “Experimental Assessment of the Seismic Performance of Hospital Cabinets Using Shake Table Testing.” Earthquake Engineering & Structural Dynamics 48 (1): 103–123. https://doi.org/10.1002/eqe.3127.
   Web of Science ®Google Scholar
• Eem, S. H., B. G. Jeon, S. J. Jang, and I. K. Choi. 2019. “Evaluate the Characteristics of Vibration Caused by Rocking Modes of Electric Cabinet Under Seismic Loading.” Transactions of the Korean Society for Noise and Vibration Engineering 29 (6): 735–744. https://doi.org/10.5050/KSNVE.2019.29.6.735.
   Google Scholar
• Eligehausen, R., R. Mallée, and J. F. Silva. 2006. Anchorage in Concrete Construction. Vol. 10. Berlin, Germany: John Wiley & Sons.
   Google Scholar
• Faraone, G., T. C. Hutchinson, R. Piccinin, and J. Silva. 2019. “Performance of Post-Installed Anchors in a Progressively Damaged Concrete Shear Wall.” ACI Structural Journal 116 (6). https://doi.org/10.14359/51718069.
   Web of Science ®Google Scholar
• Faraone, G., T. C. Hutchinson, R. Piccinin, and J. F. Silva. 2022. “Anchor Performance in Cyclically Loaded Shear Walls.” ACI Structural Journal 119 (6). https://doi.org/10.14359/51737174.
   PubMed Web of Science ®Google Scholar
• FEMA E-74. 2019. “Reducing the Risks of Nonstructural Earthquake Damage”. Practical Guide, Washington DC, USA.
   Google Scholar
• Fuchs, W., R. Eligehausen, and J. E. Breen. 1995. “Concrete Capacity Design (CCD) Approach for Fastening to Concrete.” Structural Journal 92 (1): 73–94. https://doi.org/10.14359/1533.
   Google Scholar
• Hur, J. 2012. Seismic Performance Evaluation of Switchboard Cabinets Using Nonlinear Numerical Models. Atlanta, USA: Georgia Institute of Technology.
   Google Scholar
• Hwang, K. R., H. S. Lee, and S. J. Kim. 2015. “Evaluation of Seismic Load Level in Korea Based on Global Recorded Earthquake Ground Motions.” Journal of the Earthquake Engineering Society of Korea 19 (5): 247–256. https://doi.org/10.5000/EESK.2015.19.5.247.
   Google Scholar
• Kim, N. K. 2001. “Load Transfer of Tension and Compression Anchors in Weathered Soil.” Journal of the Korean Geotechnical Society 17 (3): 59–68.
   Google Scholar
• Kim, D. I., and W. Y. Jung. 2019. “Structural Performance of the Cast-In-Place Anchor in Cracked Concrete Used in Power Plant Facilities.” Journal of the Korea Institute for Structural Maintenance and Inspection 23 (7): 120–128. https://doi.org/10.11112/jksmi.2019.23.7.120.
   Google Scholar
• Kim, J. S., W. Y. Jung, M. H. Kwon, and B. S. Ju. 2013. “Performance Evaluation of the Post-Installed Anchor for Sign Structure in South Korea.” Construction and Building Materials 44:496–506. https://doi.org/10.1016/j.conbuildmat.2013.03.015.
   Web of Science ®Google Scholar
• Kim, J. S., M. H. Kwon, H. S. Seo, and J. H. Park. 2013. “Performance Evaluation and Analysis Model for the Post-Installed Anchor.” Journal of Korean Society of Hazard Mitigation 13 (2): 89–95. https://doi.org/10.9798/kosham.2013.13.2.089.
   Google Scholar
• Lee, S. M., and W. Y. Jung. 2022. “A Study on the Load Characteristics of the Anchorage According to the Natural Frequency Change of the Electric Cabinet in a Power Plant.” Advances in Mechanical Engineering 14 (9): 1–11. https://doi.org/10.1177/16878132221123676.
   Web of Science ®Google Scholar
• Lubliner, J., J. Oliver, S. Oller, and E. Oñate. 1989. “A Plastic-Damage Model for Concrete.” International Journal of Solids and Structures 25 (3): 299–326. https://doi.org/10.1016/0020-7683(89)90050-4.
   Web of Science ®Google Scholar
• Salman, K., T. T. Tran, and D. Kim. 2020. “Seismic Capacity Evaluation of NPP Electrical Cabinet Facility Considering Grouping Effects.” Journal of Nuclear Science and Technology 57 (7): 800–812. https://doi.org/10.1080/00223131.2020.1724206.
   Web of Science ®Google Scholar
• Seo, S. Y. 2018. “A Study on the Pull-Out Strength of Bond Type Anchors.” Journal of Korean Society of Steel Construction 30 (2): 105–114. https://doi.org/10.7781/kjoss.2018.30.2.105.
   Google Scholar
• So, W. B. 2020. “ICRS analysis and seismic performance evaluation of electrical double door cabinet in power plants.” Master’s thesis in Korea, Kyung Hee University.
   Google Scholar
• Trautner, C. A., T. Hutchinson, P. R. Grosser, and J. F. Silva. 2016. “Effects of Detailing on the Cyclic Behavior of Steel Baseplate Connections Designed to Promote Anchor Yielding.” Journal of Structural Engineering 142 (2): 04015117. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001361.
   Web of Science ®Google Scholar
• Trautner, C. A., T. Hutchinson, P. R. Grosser, and J. F. Silva. 2017. “Investigation of Steel Column–Baseplate Connection Details Incorporating Ductile Anchors.” Journal of Structural Engineering 143 (8): 04017074. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001759.
   Web of Science ®Google Scholar
• Wang, L., S. Nagarajaiah, W. Shi, and Y. Zhou. 2022. “Seismic Performance Improvement of Base-Isolated Structures Using a Semi-Active Tuned Mass Damper.” Engineering Structures 271:114963. https://doi.org/10.1016/j.engstruct.2022.114963.
   Web of Science ®Google Scholar
• Wang, L., S. Nagarajaiah, Y. Zhou, and W. Shi. 2023. “Experimental Study on Adaptive-Passive Tuned Mass Damper with Variable Stiffness for Vertical Human-Induced Vibration Control.” Engineering Structures 280:115714. https://doi.org/10.1016/j.engstruct.2023.115714.
   Web of Science ®Google Scholar
• Wang, L., Y. Zhou, S. Nagarajaiah, and W. Shi. 2023. “Bi-Directional Semi-Active Tuned Mass Damper for Torsional Asymmetric Structural Seismic Response Control.” Engineering Structures 294:116744. https://doi.org/10.1016/j.engstruct.2023.116744.
   Web of Science ®Google Scholar
• Wang, L., Y. Zhou, and W. Shi. 2023. “Seismic Response Control of a Nonlinear Tall Building Under Mainshock-Aftershock Sequences Using Semi-Active Tuned Mass Damper.” International Journal of Structural Stability and Dynamics. https://doi.org/10.1142/S0219455423400278.
   Web of Science ®Google Scholar
• Yoo, S. W., S. H. Jung, K. S. Kwak, and J. H. Lee. 2006. “Experimental Study on Pull Out Characteristics of Adhesive Anchor.” KSCE Journal of Civil Engineering A 26 (3A): 555–563.
   Google Scholar
• Yun, D. W., B. G. Jeon, W. Y. Jung, S. J. Chang, and Y. J. Shin. 2019. “Analysis of Anchorage Behavior Characteristics of the Electrical Cabinet Using Shaking Table Tests.” Transactions of the Korean Society for Noise and Vibration Engineering 29 (1): 43–50. https://doi.org/10.5050/KSNVE.2019.29.1.043.
   Google Scholar