Sustainability in manufacturing processes: practices performed in metal forming, casting, heat treatment, welding and electrostatic painting

References

• Akbar M, Irohara T. 2018. Scheduling for sustainable manufacturing : A review. J Clean Prod. 205:866–883. https://linkinghub.elsevier.com/retrieve/pii/S0959652618328208
   Web of Science ®Google Scholar
• Alberg H. 2003. Material modelling for simulation of heat treatment. Luleå University of Technology.
   Google Scholar
• Antonini JM. 2003. Health effects of welding. Crit Rev Toxicol. 33(1):61–103. http://www.tandfonline.com/doi/full/10.1080/713611032
   PubMed Web of Science ®Google Scholar
• Arulrajah A, Yaghoubi E, Imteaz M, Horpibulsuk S. 2017. Recycled waste foundry sand as a sustainable subgrade fill and pipe-bedding construction material: engineering and environmental evaluation. Sustain Cities Soc. 28:343–349.
   Web of Science ®Google Scholar
• Azaouzi M, Belouettar S, Rauchs G. 2011. A numerical method for the optimal blank shape design. Mater Des. 32(2):756–765.
   Web of Science ®Google Scholar
• Badurdeen F, Jawahir IS. 2017. Strategies for value creation through sustainable manufacturing. Procedia Manuf. 8(October 2016):20–27.
   Google Scholar
• Balasubramanian S, Manonmani K, Hemalatha RM. 2014. Lasers in green manufacturing processes. Appl Mech Mater. 592–594:473–478.
   Google Scholar
• Bartocci Liboni L, Oranges Cezarino L. 2014. Strategy for sustainability in a Brazilian sugarcane industry. World J Entrep Manag Sustain Dev. 10(1):2–12.
   Google Scholar
• Bay NO, Olsson D, Andreasen JL 2005. Testing of environmentally friendly lubricants for sheet metal forming. 8th International Conference on Technology of Plasticity.
   Google Scholar
• Baykasoğlu A, Ozsoydan FB. 2018. Dynamic scheduling of parallel heat treatment furnaces: A case study at a manufacturing system. J Manuf Syst. 46:152–162. https://linkinghub.elsevier.com/retrieve/pii/S0278612517301619.
   Web of Science ®Google Scholar
• Beekaroo D, Callychurn DS, Hurreeram DK. 2019. Developing a sustainability index for Mauritian manufacturing companies. Ecol Indic. 96(March 2017):250–257. doi:10.1016/j.ecolind.2018.09.003.
   Google Scholar
• Berg P. 2014. Energy management in heat treatment. Department of Energy and Environment Division of Heat and Power Technology, Chalmers University of Technology.
   Google Scholar
• Bey N, Hauschild MZ, McAloone TC. 2013. Drivers and barriers for implementation of environmental strategies in manufacturing companies. CIRP Ann - Manuf Technol. 62(1):43–46. doi:10.1016/j.cirp.2013.03.001.
   Web of Science ®Google Scholar
• Bhardwaj B, Kumar P. 2017. Waste foundry sand in concrete: A review. Constr Build Mater. 156:661–674.
   Web of Science ®Google Scholar
• Bråtveit M, HollundB E, Moen BE. 2004. Reduced exposure to organic solvents by use of water-based paint systems in car repair shops. Int Arch Occup Env Heal. 77(1):31–38. http://link.springer.com/10.1007/s00420-003-0483-0
   PubMed Web of Science ®Google Scholar
• Blomqvist A, Düzakin-Nystedt M, Ohlson C-G, Andersson L, Jönsson B, Nielsen J, Welinder H. 2005. Airways symptoms, immunological response and exposure in powder painting. Int Arch Occup Environ Health. 78(2):123–131. http://link.springer.com/10.1007/s00420-004-0573-7
   PubMed Web of Science ®Google Scholar
• Bobkov VI, Borisov VV, Dli MI, Meshalkin VP. 2015. Multicriterial optimization of the energy efficiency of the thermal preparation of raw materials. Theor Found Chem Eng. 49(6):842–846.
   Web of Science ®Google Scholar
• Boer J, Blaga P. 2016. Optimizing production costs by redesigning the treatment process of the industrial waste water. Procedia Technol. 22:419–424. https://linkinghub.elsevier.com/retrieve/pii/S2212017316000724.
   Google Scholar
• Bonss S, Seifert M, Brenner B, Beyer E 2009. Laser beam hardening – Energy efficient heat treatment? In: International Congress on Applications of Lasers & Electro-Optics. Laser Institute of America. p. 219–224. http://aip.scitation.org/doi/abs/10.2351/1.5061556
   Google Scholar
• Brundtland GH. 1987. Report of the world commission on environment and development: our common future. Oslo: United Nations.
   Google Scholar
• BSI. 2007. OHSAS 18001 - Occupational Health and Safety.
   Google Scholar
• Callister W, Rethwisch D. 2009. Materials science and engineering: an introduction. Hoboken (NJ, USA): John Wiley & Sons.
   Google Scholar
• Chang Y, Sproesser G, Neugebauer S, Wolf K, Scheumann R, Pittner A, Rethmeier M, Finkbeiner M. 2015. Environmental and social life cycle assessment of welding technologies. Procedia CIRP. 26:293–298.
   Google Scholar
• Choi J, Hyon BJ, Kim J, Park JS. 2015. Development of single phase PFC module for electrostatic coating machine applications. 10th Conf Ind Electron Appl (ICIEA). 1751–1754. http://ieeexplore.ieee.org/document/7334394/
   Google Scholar
• Cooper DR, Rossie KE, Gutowski TG. 2017. Journal of materials processing technology the energy requirements and environmental impacts of sheet metal forming : an analysis of five forming processes. J Mater Process Tech. 244:116–135.
   Web of Science ®Google Scholar
• de Bastos CO. 2008. Estudo comparativo das propriedades dos revestimentos obtidos pela aplicação de tintas líquidas e a pó em peças metálicas em sistemas de pintura eletrostática [Master Thesis]. Instituto de Pesquisas Tecnológicas - IPT.
   Google Scholar
• de Souza EC, Fernandes MR, Augustinho SCM, de Campos Franceschini Canale L, Totten GE. 2009. Comparison of structure and quenching performance of vegetable oils. J ASTM Int. 6(9):102188.
   Google Scholar
• Dean SW, Sahay SS. 2008. Starch-based quenchants as an eco-friendly alternative to quenching oil. J ASTM Int. 5(10):101789. http://www.astm.org/doiLink.cgi?JAI101789
   Google Scholar
• Denyer D, Tranfield D. 2009. Producing a systematic review. In: Buchanan DA, Bryman A, editors Sage handbook organ research methods. Thousand Oaks: SAGE Publications Ltd, p. 671–689. http://www.tandfonline.com/doi/full/10.1080/03079451003781858
   Google Scholar
• Diop MA, Xiaomeng C, Hassan MI. 2017. Billets heat treatment using flue gas for energy efficiency and batching cycle time reduction. Energy Procedia. 105:3377–3383.
   Google Scholar
• Dossett JL, Boyer HE. 2006. Practical heat treating. Russell Township: ASM International.
   Google Scholar
• Elmabrouk EM, Wu Y. 2012. Enhancing the heat transfer in a heat treatment furnace through improving the combustion process in the radiation tubes. IMA J Appl Math. 77(1):59–71.
   Web of Science ®Google Scholar
• Esquer J, Vaeza-Gastélum C, Remmen A, Alvarez-Chávez CR, Velázquez LE. 2015. Life cycle assessment for printed newspapers in Northwestern Mexico. Int J Sustain Dev World Ecol. 22(3):259–268. doi:10.1080/13504509.2015.1020456.
   Web of Science ®Google Scholar
• Filho EB, Zavaglia CAC, Button ST, Gomes E, Nery FAC. 2011. Conformação plástica dos metais.
   Google Scholar
• Garetti M, Taisch M. 2012. Sustainable manufacturing: trends and research challenges. Prod Plan Control. 23(2–3):83–104. https://www.tandfonline.com/doi/full/10.1080/09537287.2011.591619
   Google Scholar
• Georgiadis P, Kyrtopoulos SA. 1999. Molecular epidemiological approaches to the study of the genotoxic effects of urban air pollution. Fundam Mol Mech Mutagen. 428:91–98.
   PubMed Web of Science ®Google Scholar
• Gialos AA, Zeimpekis V, Alexopoulos ND, Kashaev N, Riekehr S, Karanika A. 2018. Investigating the impact of sustainability in the production of aeronautical subscale components. J Clean Prod. 176:785–799.
   Web of Science ®Google Scholar
• Granatstein D, Kupferman E. 2008. Sustainable horticulture in fruit production. Acta Hortic. 767:295–308.
   Google Scholar
• Haake J, Zediker M. 2005. Heat treating and cladding operations with high-power diode lasers. In: Schriempf JT, editor. Photonics West 2005. San Jose. p. 76–86. http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=859268.
   Google Scholar
• Haapala KR, Camelio J, Sutherland JW, Skerlos SJ, Dornfeld DA. 2013. A review of engineering research in sustainable manufacturing. J Manuf Sci Eng. 135(August 2013):1–16.
   Google Scholar
• Haas E, Schwarz RC, Papazian JM. 2002. Design and test of a reconfigurable forming die. J Manuf Process. 4(1):77–85.
   Google Scholar
• Han S, Hwang T, Oh I, Choi M, Moon YH. 2018. Manufacturing of tailor-rolled blanks with thickness variations in both the longitudinal and latitudinal directions. J Mater Process Technol. 256:(February):172–182.
   Web of Science ®Google Scholar
• Hasanbeigi A, Arens M, Price L. 2014. Alternative emerging ironmaking technologies for energy-efficiency and carbon dioxide emissions reduction: A technical review. Renew Sustain Energy Rev. 33:645–658.
   Web of Science ®Google Scholar
• Hauschild M, Jeswiet J, Alting L. 2005. from life cycle assessment to sustainable production: status and perspectives. CIRP Ann - Manuf Technol. 54(2):1–21.
   Web of Science ®Google Scholar
• Ingarao G, Ambrogio G, Gagliardi F, Di Lorenzo R. 2012. A sustainability point of view on sheet metal forming operations: material wasting and energy consumption in incremental forming and stamping processes. J Clean Prod. 29–30:255–268.
   Web of Science ®Google Scholar
• Ingarao G, Di Lorenzo R, Micari F. 2011. Sustainability issues in sheet metal forming processes : an overview. J Clean Prod. 19(4):337–347.
   Web of Science ®Google Scholar
• Ingarao G, Priarone PC, Gagliardi F, Di Lorenzo R, Settineri L. 2015. Subtractive versus mass conserving metal shaping technologies: an environmental impact comparison. J Clean Prod. 87(C):862–873.
   Google Scholar
• ISO. 2018. ISO 45001 - Occupational health and safety.
   Google Scholar
• Källén M 2012. Energy efficiency opportunities within the heat treatment industry [Master Thesis]. Chalmers University of Technology.
   Google Scholar
• Kalpakjian S, Schmid SR. 2013. Manufacturing manufacturing engineering and technology. Upper Saddle River: Prentice Hall.
   Google Scholar
• Kellens K, Paraskevas D, Dewulf W, Duflou J. 2015. Environmental comparison of metal coating processes. Procedia CIRP. 29:420–425.
   Google Scholar
• Kim DB, Shin SJ, Shao G, Brodsky A. 2015. A decision-guidance framework for sustainability performance analysis of manufacturing processes. Int J Adv Manuf Technol. 78(9–12):1455–1471.
   Web of Science ®Google Scholar
• Kipepe TM, Pan X. 2015. Energy improvement in induction furnace using foaming slag with variation of carbon injection. J Energy South Africa. 26(2):64–73.
   Web of Science ®Google Scholar
• Kleiner M, Geiger M, Klaus A. 2003. Manufacturing of lightweight components by metal forming. CIRP Ann - Manuf Technol. 52(2):521–542.
   Web of Science ®Google Scholar
• Kluczek A. 2014. Application of best available techniques in an enterprise producing heating devices. J Clean Prod. 83:444–453.
   Web of Science ®Google Scholar
• Kou S. 2003. Welding metallurgy. Hoboken (NJ, USA): John Wiley & Sons, Inc.
   Google Scholar
• Krishnaraj R. 2015. Foundry air pollution: hazards, measurements and control. In:Lichtfouse E, Schwarzbauer J, Robert D, editors. CO2 sequestration, biofuels depollut. Vol. 5. Cham: Springer International Publishing. p. 335–357. http://link.springer.com/10.1007/978-3-319-11906-9.
   Google Scholar
• Latif HH, Gopalakrishnan B, Nimbarte A, Currie K. 2017. Sustainability index development for manufacturing industry. Sustain Energy Technol Assessments. 24:82–95.
   Web of Science ®Google Scholar
• Lazzarin RM, Noro M. 2015. Energy efficiency opportunities in the production process of cast iron foundries: an experience in Italy. Appl Therm Eng. 90:509–520.
   Web of Science ®Google Scholar
• Leal GSS, Guedria W, Panetto H. 2019. Interoperability assessment: a systematic literature review. Comput Ind. 106:111–132. doi:10.1016/j.compind.2019.01.002
   Web of Science ®Google Scholar
• Lenz W, Pfeifer H. 2013. Berechnung von thermospannungen in w??rmebehandlungsanlagen mittels gekoppelter numerischer verfahren. Chemie-Ingenieur-Technik. 85(8):1312–1316.
   Google Scholar
• Li Y, Chen X, Liu Z, Sun J, Li F, Li J, Zhao G. 2017. A review on the recent development of incremental sheet-forming process. Int J Adv Manuf Technol. 92(5–8):2439–2462. http://link.springer.com/10.1007/s00170-017-0251-z
   Web of Science ®Google Scholar
• Liu Y, Shao Z, Zhang Y, Fu B, Yang R 2014. Virtualized welding based teleoperation with pipe gas tungsten arc welding applications. In: 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. IEEE. p. 1604–1609. http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=6878313
   Google Scholar
• Matos LM, Anholon R, Da Silva D, Cooper Ordoñez RE, Gonçalves Quelhas OL, Filho WL, de Santa-Eulalia LA. 2018. Implementation of cleaner production: a ten-year retrospective on benefits and difficulties found. J Clean Prod. 187:409–420. https://linkinghub.elsevier.com/retrieve/pii/S0959652618308527.
   Web of Science ®Google Scholar
• Matsuura H, Fruehan RJ. 2009. Slag foaming in an electric arc furnace. ISIJ Int. 49(10):1530–1535.
   Web of Science ®Google Scholar
• Mehta DP 2011. Energy efficiency through waste heat recovery in automotive manufacturing related industries. In: SAE 2011 World Congress Exhibition. http://papers.sae.org/2011-01-0327/
   Google Scholar
• Mendikoa I, Sorli M, Armijo A, Garcia L, Erausquin L, Insunza M, Bilbao J, Friden H, Björk A, Bergfors L, et al. 2013. Energy efficiency optimisation in heat treatment process design.
   Google Scholar
• Merklein M, Johannes M, Lechner M, Kuppert A. 2014. A review on tailored blanks - production, applications and evaluation. J Mater Process Technol. 214(2):151–164.
   Web of Science ®Google Scholar
• Mittal VK, Sangwan KS. 2014. Development of a structural model of environmentally conscious manufacturing drivers. J Manuf Technol Manag. 25(8):1195–1208.
   Google Scholar
• Moldavska A, Welo T. 2019. A holistic approach to corporate sustainability assessment : incorporating sustainable development goals into sustainable manufacturing performance evaluation. J Manuf Syst. 50(August 2018):53–68.
   Google Scholar
• Neto B, Kroeze C, Hordijk L, Costa C, Pulles T. 2009. Strategies to reduce the environmental impact of an aluminium pressure die casting plant: a scenario analysis. J Environ Manage. 90(2):815–830.
   PubMed Web of Science ®Google Scholar
• Neugebauer R, Altan T, Geiger M, Kleiner M, Sterzing A. 2006. Sheet metal forming at elevated temperatures. CIRP Ann - Manuf Technol. 55(2):793–816.
   Web of Science ®Google Scholar
• Nielsen. 2013. 50% of global consumers surveyed willing to pay more for goods, services from socially responsible companies, up from 2011 [accessed 2019 Jan 25]. https://www.nielsen.com/ie/en/press-room/2013/nielsen-50-percent-of-global-consumers-surveyed-willing-to-pay-more-fo.html
   Google Scholar
• Osakada K, Mori K, Altan T, Groche P. 2011. Mechanical servo press technology for metal forming. CIRP Ann - Manuf Technol. 60(2):651–672.
   Web of Science ®Google Scholar
• Pagone E, Jolly M, Salonitis K. 2016. the development of a tool to promote sustainability in casting processes. Procedia CIRP. 55:53–58.
   Google Scholar
• Parsa MH, Pournia P. 2007. Optimization of initial blank shape predicted based on inverse finite element method. Finite Elem Anal Des. 43:218–233.
   Web of Science ®Google Scholar
• Paul ID, Bhole GP, Chaudhari JR. 2014. A review on green manufacturing : it ’ s important, methodology and its application. MSPRO. 6(Icmpc):1644–1649.
   Google Scholar
• Pavlovich LB, Alekseeva NM, Dolgopolov VP, Popov AA. 2004. ANTI-CORROSION PAINT AND VARNISH COATINGS EMPLOYING WASTES FROM COKE AND COAL CHEMICALS PRODUCTION. Metallurgist. 48(6):56–57.
   Web of Science ®Google Scholar
• Poozesh S, Akafuah N, Saito K. 2018. Effects of automotive paint spray technology on the paint transfer efficiency – a review. Proc Inst Mech Eng Part D J Automob Eng. 232(2):282–301.
   Web of Science ®Google Scholar
• Pusavec F, Krajnik P, Kopac J. 2010. Transitioning to sustainable production – Part I : application on machining technologies. J Clean Prod. 18(2):174–184.
   Web of Science ®Google Scholar
• Ramaprasad MS, Srinivas MN 2012. Permanent molding of cast irons – present status and scope. In: Science and technology of casting processes. Vol. 2. London: IntechOpen. http://www.intechopen.com/books/science-and-technology-of-casting-processes/permanent-molding-of-cast-irons-present-status-and-scope
   Google Scholar
• Rauch E, Dallinger M, Dallasega P, Matt DT. 2015. Sustainability in manufacturing through distributed manufacturing. Procedia CIRP. 29:544–549.
   Google Scholar
• Roberts RE, Roberts JB. 1976. Reducing solvent emissions in automotive spray painting. J Air Pollut Control Assoc. 26(4):353–358. http://www.tandfonline.com/doi/abs/10.1080/00022470.1976.10470261
   Web of Science ®Google Scholar
• Rossi M, Germani M, Zamagni A. 2016. Review of ecodesign methods and tools. Barriers and strategies for an effective implementation in industrial companies. J Clean Prod. 129:361–373. doi:10.1016/j.jclepro.2016.04.051
   Web of Science ®Google Scholar
• Saavedra YMB, Iritani DR, Pavan ALR, Ometto AR. 2018. Theoretical contribution of industrial ecology to circular economy. J Clean Prod. 170:1514–1522. doi:10.1016/j.jclepro.2017.09.260
   Web of Science ®Google Scholar
• Safety in heat treatment. 2013. Int Heat Treat Surf Eng. 7(1):1. http://www.tandfonline.com/doi/full/10.1179/1749514813Z.00000000058.
   Google Scholar
• Salonitis K, Jolly M, Zeng B. 2017. Simulation based energy and resource efficient casting process chain selection: a case study. Procedia Manuf. 8(October 2016):67–74. https://linkinghub.elsevier.com/retrieve/pii/S2351978917300124
   Google Scholar
• Salonitis K, Jolly MR, Zeng B, Mehrabi H. 2016a. Improvements in energy consumption and environmental impact by novel single shot melting process for casting. J Clean Prod. 137:1532–1542.
   Web of Science ®Google Scholar
• Salonitis K, Zeng B, Mehrabi HA, Jolly M. 2016b. The challenges for energy efficient casting processes. Procedia CIRP. 40:24–29.
   Google Scholar
• Sangwan KS. 2011. Development of a multi criteria decision model for justification of green manufacturing systems. Int J Green Econ. 5(3):285. http://www.inderscience.com/link.php?id=44239
   Google Scholar
• Schmitz N, Schwotzer C, Pfeifer H, Wuenning JG, Cresci E, Schneider J. 2017. Numerical investigation on post-combustion in a burner for heat treatment furnaces with a reducing gas atmosphere. Energy Procedia. 120:112–119. https://linkinghub.elsevier.com/retrieve/pii/S1876610217327273.
   Google Scholar
• Schönfelder M, Wünning JG, Mickey S. 2016. Efficient gas heating industrial furnaces. Therm Process. 38–42.
   Google Scholar
• Searson PC, Nagaskar PV, Latanision RM. 1990. Electrochemistry of metallic glasses. In: White RE, Bockris JOM, Conway RB, editors. Modern aspects of electrochemistry. New York: Plenum Press.
   Google Scholar
• Seliger G. 2007. Suatainability in Manufacturing. New York: Springer Berlin Heidelberg.
   Google Scholar
• Sharma A, Zhao F, Sutherland JW. 2015. Econological scheduling of a manufacturing enterprise operating under a time-of-use electricity tariff. J Clean Prod. 108:256–270.
   Web of Science ®Google Scholar
• Shi X, Chen J, Peng Y, Ruan X. 2004. A new approach of die shape optimization for sheet metal forming processes. J Mater Process Technol. 152:35–42.
   Web of Science ®Google Scholar
• Shubham CP, Murty LS. 2018. Organizational adoption of sustainable manufacturing practices in India: integrating institutional theory and corporate environmental responsibility. Int J Sustain Dev World Ecol. 25(1):23–34. doi:10.1080/13504509.2016.1258373.
   Web of Science ®Google Scholar
• Silva S, Valente RAF. 2012. Blank optimization in a stamping process — Influence of the geometry definition. Finite Elem Anal Des. 61:75–84.
   Web of Science ®Google Scholar
• Singh G, Siddique R. 2012. Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete. Constr Build Mater. 26(1):415–422.
   Web of Science ®Google Scholar
• Singh PP, Madan J. 2016. A computer-aided system for sustainability assessment for the die-casting process planning. Int J Adv Manuf Technol. 87(5–8):1283–1298.
   Web of Science ®Google Scholar
• Sivapirakasam SP, Mohan S, Kumar MCS, Surianarayanan M. 2015. Welding fume reduction by nano-alumina coating on electrodes e towards green welding process. J Clean Prod. 108:131–144.
   Web of Science ®Google Scholar
• Sonawane GD, Gunjal SU. 2014. Review on recent trends & optimisation in heat treatment. IOSR J Mech Civ Eng. 11(3):52–58.
   Google Scholar
• Sowinski A, Mehrani P. 2015. Impact of addition of a catalyst or its support on reactor wall coating due to electrostatic charging during fluidization of polyethylene. Ind Eng Chem Res.
   Web of Science ®Google Scholar
• Srinivasan K, Siddharth CSK, Kaarthic LVA, Thenarasu M. 2018. Evaluation of mechanical properties, economic and environmental benefits of partially replacing silica sand with biomass ash for aluminium casting. Mater Today Proc. 5(5):12984–12992.
   Google Scholar
• Stanescu M, Stratton P. 2006. HEAT TREATMENT: PLAY IT SAFE! Heat Treat Prog. 48–52.
   Google Scholar
• Steinboeck A, Wild D, Kugi A. 2013. Energy-efficient control of continuous reheating furnaces. IFAC.
   Google Scholar
• Stupnišek M 2010. Heat treatment in an environmentally-friendly gas atmosphere. In: 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress. p. 26–30.
   Google Scholar
• Subject Guide Heat Treating. 2015.
   Google Scholar
• Subramanian N, Gunasekaran A, Abdulrahman M, Liu C. 2014. Factors for implementing end-of-life product reverse logistics in the Chinese manufacturing sector. Int J Sustain Dev World Ecol. 21(3):235–245. doi:10.1080/13504509.2014.906003.
   Web of Science ®Google Scholar
• Toke LK, Kalpande SD. 2018. A framework of enabler’s relationship for implementation of green manufacturing in Indian context. Int J Sustain Dev World Ecol. 25(4):303–311. doi:10.1080/13504509.2017.1393635.
   Web of Science ®Google Scholar
• U.S. Bureau of Labor Statistics. 2019. Manufacturing: NAICS 31-33 [accessed 2019 Jan 22]. https://sustainabledevelopment.un.org/sdg4
   Google Scholar
• UN. 2015. Sustainable Development Goals (SDGs) [accessed 2019 May 2]. https://www.un.org/sustainabledevelopment/sustainable-development-goals/
   Google Scholar
• UNEP. 1990. Resource efficient and cleaner production [accessed 2019 April 12]. http://www.unep.org
   Google Scholar
• Valase K, Raut DN. 2019. Mediation analysis of multiple constructs in the relationship between manufacturing and technology and environmental constructs in structural equation model for sustainable manufacturing. Int J Adv Manuf Technol. 101(5–8):1887–1901. http://link.springer.com/10.1007/s00170-018-2979-5
   Web of Science ®Google Scholar
• Velichkin VA, Zavyalov VA. 2018. Optimization of thermal object nonlinear control systems by energy efficiency criterion. IOP Conf Ser Mater Sci Eng. 317:012015.
   Google Scholar
• Villaume JE. 1979. Effects of welding on health ewh 79. Miami: Amer Welding Society.
   Google Scholar
• Vimal KEK, Vinodh S, Raja A. 2015. Modelling, assessment and deployment of strategies for ensuring sustainable shielded metal arc welding process - A case study. J Clean Prod. 93:364–377. doi:10.1016/j.jclepro.2015.01.049
   Web of Science ®Google Scholar
• Walczyk DF, Hardt DE. 1998. Discrete dies for sheet metal forming. J Manuf Syst. 17(6):436–454.
   Web of Science ®Google Scholar
• Wang JD, Chen JD. 1993. Acute and chronic neurological symptoms among paint workers exposed to mixtures of organic solvents. Environ Res. 61(1):107–116. http://linkinghub.elsevier.com/retrieve/pii/S0013935183710546
   PubMed Web of Science ®Google Scholar
• Wang ZG. 2004. Tribological approaches for green metal forming. J Mater Process Technol. 151:223–227.
   Web of Science ®Google Scholar
• Xavier AF, Naveiro RM, Aoussat A, Reyes T. 2017. Systematic literature review of eco-innovation models: Opportunities and recommendations for future research. J Clean Prod. 149:1278–1302. https://linkinghub.elsevier.com/retrieve/pii/S0959652617303712.
   Web of Science ®Google Scholar
• Yang Y, De Jong RA, Reuter MA. 2007. CFD prediction for the performance of a heat treatment furnace. Prog Comput Fluid Dyn An Int J. 7(2/3/4):209.
   Google Scholar
• Yazoghli-Marzouk O, Vulcano-Greullet N, Cantegrit L, Friteyre L, Jullien A. 2014. Recycling foundry sand in road construction-field assessment. Constr Build Mater. 61:69–78.
   Web of Science ®Google Scholar
• Yosri MH. 2018. Air ionizer application for electrostatic discharge (ESD) dust removal in automotive painting industry Air ionizer application for electrostatic discharge (ESD) dust removal in automotive painting industry. IOP Conf Ser Mater Sci Eng.
   Google Scholar
• Zeng B, Jolly M, Salonitis K. 2014. Manufacturing cost modeling of castings produced with CRIMSON process. In: Shape Casting: 5th International Symposium. Cham: Springer International Publishing. p. 201–208. http://link.springer.com/10.1007/978-3-319-48130-2_25
   Google Scholar