Numerical simulation of aircraft interior components under crash loads

References

• Federal Aviation Administration Technical Center . 1991 . Aircraft safety research plan , Atlantic City, NJ : Federal Aviation Administration Technical Center .
   Google Scholar
• Aitken , R. 2000 . Damage due to soft body impact on composite sandwich aircraft panels , Ph.D. diss. New Zealand : University of Auckland .
   Google Scholar
• Ault , D. 1992 . Longitudinal acceleration test of overhead luggage bins in a transport airframe section , U. S. Department of Transportation . Report DOT/FAA/CT-92/9
   Google Scholar
• Barré , S. , Chotard , T. and Benzeggagh , M. L. 1996 . Comparative study of strain rate effects on mechanical properties of glass fibre-reinforced thermoset matrix composites . Compos. Part A , 27 : 1169 – 1181 .
   Web of Science ®Google Scholar
• Byar , A. , Awerbuch , J. , Lau , A. and Tan , T. . Finite element simulation of a vertical drop test of a Boeing 737 fuselage section . 3rd Triennial International Fire and Cabin Safety Research Conference . Atlantic City, NJ.
   Google Scholar
• Chang , F. K. and Chang , K. Y. 1987 . A progressive damage model for laminated composites containing stress concentrations . J. Compos. Mater. , 27 : 834 – 855 .
   Google Scholar
• 1984 . Crash Dynamics and Engineering Development Program . Federal Register , Vol. 49 ( 185 )
   Google Scholar
• 1988 . Emergency landing dynamic conditions , U. S. Department of Transportation . Federal Aviation Regulations, FAR § 25.562
   Google Scholar
• Goldsmith , W. and Sackman , J. L. 1992 . An experimental study of energy absorption in impact on sandwich plates . Int. J. Impact. Eng. , 12 ( 2 ) : 241 – 262 .
   Web of Science ®Google Scholar
• Green , G. E. , Ketteridge , P. G. and Lynam , P. H. . Uses of Nomex honeycomb in composite structures: a review . 1st Core Conference . Zurich, Switzerland.
   Google Scholar
• Hashemi , S. M. R. and Walton , A. C. 2000 . A systematic approach to aircraft crashworthiness and impact surface material models . Proc. I MECH E Part G J. Aerosp. Eng. , 214 ( 5 ) : 265 – 280 .
   Google Scholar
• Heimbs , S. , Middendorf , P. and Maier , M. . Honeycomb sandwich material modeling for dynamic simulations of aircraft interior components . 9th International LS-DYNA Users Conference . Dearborn, MI.
   Google Scholar
• Heimbs , S. 2008 . Sandwichstrukturen mit Wabenkern: Experimentelle und numerische Analyse des Schädigungsverhaltens unter statischer und kurzzeitdynamischer Belastung , Ph.D. diss. Germany : Kaiserslautern University of Technology . (in German)
   Google Scholar
• Heimbs , S. , Schmeer , S. , Middendorf , P. and Maier , M. 2007 . Strain rate effect in phenolic composites and phenolic-impregnated honeycomb structures . Compos. Sci. Tech. , 67 ( 13 ) : 2827 – 2837 .
   Web of Science ®Google Scholar
• Humfeldt , D. , Harriehausen , M. , Schroeder , J. , Sperber , M. and Demary , M. Attachment for aircraft interior parts . European Patent EP1630098 . 2006 .
   Google Scholar
• Industrial and Materials Technology . 1992 . Crashworthiness for commercial aircraft programme , Area-3 Aeronautics, European Commission .
   Google Scholar
• International Air Transport Association . 2003 . Baggage Services Manual, , 6th ed.
   Google Scholar
• Jackson , K. E. and Fasanella , E. L. . Crash simulation of a vertical drop test of a B737 fuselage section with overhead bins and luggage . 3rd Triennial International Fire and Cabin Safety Research Conference . Atlantic City, NJ.
   Google Scholar
• Jenkinson , L. R. , Simpkin , P. and Rhodes , D. 1999 . Civil Jet Aircraft Design , London : Arnold .
   Google Scholar
• Knops , G. L. W. M. 1994 . “ Aircraft seat and luggage bin sled tests ” . In Crashworthiness for Commercial Aircraft , Delft, , Netherlands : European IMT Research Programme, TNO . Report No. 94.OR.BV.043.1/GKN AERO-CT92–0030
   Google Scholar
• Logue , T. V. , McGuire , R. J. , Reinhardt , R. J. , Vu , J. W. and Vu , T. V. 1995 . Vertical drop test of a narrow-body fuselage section with overhead stowage bins and auxiliary fuel tank system on board , Washington, DC : U. S. Department of Transportation . Report DOT/FAA/CT-94/116
   Google Scholar
• LS-DYNA . 2003 . Keyword User's Manual, Version 970 , Livermore, CA : LSTC .
   Google Scholar
• Marczyk , J. 1999 . Principles of Simulation-Based Computer-Aided Engineering , Barcelona, , Spain : FIM Publications .
   Google Scholar
• McCarty , J. R. 1966 . SAWE technical papers 552: Industry re-validation of average baggage weight , Los Angeles, CA : International Society of Allied Weight Engineers .
   Google Scholar
• McCarty , J. R. 1977 . SAWE technical papers 1155: Carry on baggage review , Los Angeles, CA : International Society of Allied Weight Engineers .
   Google Scholar
• McGuire , R. J. 2000 . Longitudinal acceleration test of overhead luggage bins and auxiliary fuel tank in a transport airplane airframe section, part II , U. S. Department of Transportation . Report DOT/FAA/AR-99/4, II
   Google Scholar
• Newill , J. F. and Vinson , J. R. . Some high strain rate effects on composite materials . 9th International Conference on Composite Materials . pp. 269 – 277 . Madrid, , Spain
   Google Scholar
• Nilsson , L. and Redhe , M. . An investigation of structural optimization in crashworthiness design using a stochastic approach . 8th International LS-DYNA Users Conference . Dearborn, MI, USA.
   Google Scholar
• Noakes , K. 1992 . Successful Composite Techniques , London : Osprey Publishing .
   Google Scholar
• Nyden , M. R. , Brown , J. E. and Lomakin , S. M. 1994 . Flammability properties of honeycomb composites and phenol-formaldehyde resins, Fire and Polymers II: Materials and Tests for Hazard Prevention , ACS Symposium Series 599 245 – 255 . Washington, DC
   Google Scholar
• Richards , I. and Abrahams , S. B. 1988 . CAA Paper 88008: Passenger and hand baggage weight survey – Luton Airport , Civil Aviation Authority .
   Google Scholar
• Schiantarelli , E. F. . Core composites in Swissair aircraft . 1st Core Conference . Zurich, Switzerland.
   Google Scholar
• Schoke , B. 1997 . Schaumstoffe in der Innenausstattung von Zivilflugzeugen , K.1 – K.12 . Fachtagung Polymerschäume . (in German)
   Google Scholar
• Schweizerhof , K. and Senger , W. 1995 . “ Numerical simulation of hatrack sled tests ” . In Crashworthiness for Commercial Aircraft, , Grafing, , Germany : CAD-FEM . European IMT research programme AERO-CT92-0030, Report No. AERO 95–2
   Google Scholar
• Torenbeek , E. 1982 . Synthesis of Subsonic Airplane Design , Delft : University Press .
   Google Scholar
• van Dyke , K. S. 1958 . SAWE technical papers 196: Average baggage weights – Proposals for the ATA baggage subcommittee , Los Angeles, CA : International Society of Allied Weight Engineers .
   Google Scholar
• Vassiliadis , J. 1991 . SAWE technical papers 1990: Average passenger and hand baggage weight survey , Los Angeles, CA : International Society of Allied Weight Engineers .
   Google Scholar
• Vinson , J. R. and Powers , B. M. . High strain rate effects in materials in sandwich constructions . Proceedings of the 3rd International Conference on Sandwich Construction . Southampton, UK. pp. 769 – 776 .
   Google Scholar
• Vogt , D. , Hartnack , R. and Olbert , M. . Uncertainty assessment with stochastic simulation in aircraft cabin development . 6th European LS-DYNA Users Conference . Gothenburg, Sweden.
   Google Scholar
• Vogt , D. , Olbert , M. and Schlattmann , J. 2007 . Uncertainty management for computer-aided engineering in aircraft cabin development Hamburg, , Germany International Workshop on Aircraft System Technologies AST 2007
   Google Scholar
• Willson , P. 2003 . An update on phenolic resins for use in mass transport, marine, off shore and construction applications , UK : University of Newcastle . Composites in Fire 3
   Google Scholar