Computational modelling of vehicle interior components for impact applications: moulding residual stress

References

• Alam , K. and Kama , M. R. 2005 . A robust optimization of injection molding runner balancing . Comput. Chem. Eng , 29 : 1934 – 1944 . doi: 10.1016/j.compchemeng.2005.04.005
   Web of Science ®Google Scholar
• Boria , S. and Belingardi , G. 2012 . Numerical investigation of energy absorbers in composite materials for automotive applications . Int. J. Crashworthiness , DOI:10.1080/13588265.2011.648516
   Web of Science ®Google Scholar
• Cui , S. , Huang , Z. and Zhang , Y. 2008 . System design and implementation of an integrated CAE system for injection molding . Polym-Plast. Technol , 47 : 458 – 465 . doi: 10.1080/03602550801946799
   Web of Science ®Google Scholar
• Eghtesad , A. and Shafiei , A. R. 2012 . Body deformation study in a Formula one race car crashing into a rigid barrier at different crash angles . Int. J. Crashworthiness , DOI:10.1080/13588265.2012.661657
   Web of Science ®Google Scholar
• Grujicic , M. , Sellappan , V. , Pandurangan , B. , Li , G. , Vahidi , A. , Seyr , N. , Erdmannc , M. and Holzleitner , J. 2008 . Computational analysis of injection-molding residual-stress development in direct-adhesion polymer-to-metal hybrid body-in-white components . J. Mater. Process. Tech. , 203 : 19 – 36 . doi: 10.1016/j.jmatprotec.2007.09.059
   Web of Science ®Google Scholar
• Guo , L. , Tovar , A. , Penninger , C. L. and Renaud , J. E. 2011 . Strain-based topology optimisation for crashworthiness using hybrid cellular automata . Int. J. Crashworthiness , 16 : 239 – 252 . doi: 10.1080/13588265.2010.544892
   Web of Science ®Google Scholar
• Hallquist , J. O. 2003 . LS-DYNA Keyword User's Manual, Version 970 , Livermore Software Technology Corporation, Livermore, CA .
   Google Scholar
• Imihezri , S. S.S. , Sapuan , S. M. , Sulaiman , S. , Hamdan , M. M. , Zainuddin , E. S. , Osmana , M. R. and Rahman , M. Z.A. 2006 . Mould flow and component design analysis of polymeric based composite automotive clutch pedals . J. Mater. Process. Tech. , 171 : 356 – 365 . doi: 10.1016/j.jmatprotec.2005.06.077
   Web of Science ®Google Scholar
• Klimkeit , B. , Nadot , Y. , Castagnet , S. , Nadot-Martin , C. , Dumas , C. , Bergamo , S. , Sonsino , C. M. and Büter , A. 2011 . Multiaxial fatigue life assessment for reinforced polymers . Int. J. Fatigue , 33 : 766 – 780 . doi: 10.1016/j.ijfatigue.2010.12.004
   Web of Science ®Google Scholar
• Krivachy , R. , Riedel , W. , Weyer , S. and Thoma , K. 2008 . Characterisation and modelling of short fibre reinforced polymers for numerical simulation of a crash . Int. J. Crashworthiness , 13 : 559 – 566 . doi: 10.1080/13588260802293053
   Web of Science ®Google Scholar
• Laspalas , M. , Crespo , C. , Jiménez , M. A. , García , B. and Pelegay , J. L. 2008 . Application of micromechanical models for elasticity and failure to short fibre reinforced composites. Numerical implementation and experimental validation . Comput. Struct , 86 : 977 – 987 . doi: 10.1016/j.compstruc.2007.04.024
   Web of Science ®Google Scholar
• Li , M. , Deng , Z. , Liu , R. and Guo , H. 2011 . Crashworthiness design optimisation of metal honeycomb energy absorber used in lunar lander . Int. J. Crashworthiness , 16 : 411 – 419 . doi: 10.1080/13588265.2011.596677
   Web of Science ®Google Scholar
• López , J. , Navarro , R. , Gallego , J. M. , Parres , F. and Ferrándiz , S. 2009 . Failure analysis of automotive battery parts . Eng. Fail. Anal. , 16 : 2217 – 2223 . doi: 10.1016/j.engfailanal.2009.03.004
   Web of Science ®Google Scholar
• Lönn , D. , Fyllingen , Ø. and Nilssona , L. 2010 . An approach to robust optimization of impact problems using random samples and meta-modelling . Int. J. Impact. Eng. , 37 : 723 – 734 . doi: 10.1016/j.ijimpeng.2009.07.002
   Web of Science ®Google Scholar
• Lönn , D. , Bergman , G. , Nilsson , L. and Simonsson , K. 2011 . Experimental and finite element robustness studies of a bumper system subjected to an offset impact loading . Int. J. Crashworthiness , 16 : 155 – 168 . doi: 10.1080/13588265.2010.539339
   Web of Science ®Google Scholar
• Marzbanrad , J. , Alijanpour , M. and Kiasat , M. S. 2009 . Design and analysis of an automotive bumper beam in low-speed frontal crashes . Thin. Wall. Struct. , 47 : 902 – 911 . doi: 10.1016/j.tws.2009.02.007
   Web of Science ®Google Scholar
• Matsumoto , A. T. , Driemeier , L. and Alves , M. 2012 . Performance of polymeric reinforcements in vehicle structures submitted to frontal impact . Int. J. Crashworthiness , DOI:10.1080/13588265.2012.678693
   Web of Science ®Google Scholar
• Nowpada , S. , Chirwa , E. C. , Myler , P. , Chinnaswamy , G. K. and Matsika , E. 2010 . ‘Eggbox’ panel for commercial vehicle front–compressive loading tests . Int J. Crashworthiness , 15 : 59 – 70 . doi: 10.1080/13588260903007451
   Web of Science ®Google Scholar
• Nutini , M. and Vitali , M. 2010 . “ Simulating Anisotropy with Ls-Dyna in Glass-Reinforces, Polypropylene-Based Components ” . Bamberg : LS-DYNA Forum .
   Google Scholar
• Odacı , İ.K. , Kılıçaslan , C. , Taşdemirci , A. and Güden , M. (2012) . Projectile impact testing of glass fiber-reinforced composite and layered corrugated aluminium and aluminium foam core sandwich panels: a comparative study . Int. J. Crashworthiness , DOI:10.1080/13588265.2012.690215
   Web of Science ®Google Scholar
• Ozcelik , B. , Ozbay , A. and Demirbas , E. 2010 . Influence of injection parameters and mold materials on mechanical properties of ABS in plastic injection molding . Int. Commun. Heat. Mass. , 37 : 1359 – 1365 . doi: 10.1016/j.icheatmasstransfer.2010.07.001
   Web of Science ®Google Scholar
• Park , K. , Kim , B. and Yao , D. 2006 . Numerical simulation for injection molding with a rapidly heated mold, part I: Flow simulation for thin wall parts . Polym-Plast. Technol. , 45 : 897 – 902 . doi: 10.1080/03602550600718142
   Web of Science ®Google Scholar
• Pessey , D. , Bahlouli , N. , Pattofatto , S. and Ahzi , S. 2008 . Polymer composites for the automotive industry: characterisation of the recycling effect on the strain rate sensitivity . Int. J. Crashworthiness , 13 : 411 – 424 . doi: 10.1080/13588260802030745
   Web of Science ®Google Scholar
• Ramalhete , P. S. , Senos , A. M.R. and Aguiar , C. 2010 . Digital tools for material selection in product design . Mater. Design. , 31 : 2275 – 2287 . doi: 10.1016/j.matdes.2009.12.013
   Web of Science ®Google Scholar
• Shen , Y. K. , Wu , C. W. , Yu , Y. F. and Chung , H. W. 2008 . Analysis for optimal gate design of thin-walled injection molding . Int. Commun. Heat. Mass. , 35 : 728 – 734 . doi: 10.1016/j.icheatmasstransfer.2008.01.014
   Web of Science ®Google Scholar
• Tabacu , S. , Tabacu , I. and Hadar , A. 2011 . Computational modelling of vehicle interior components for impact applications: Thickness analysis . Int. J. Crashworthiness , 16 : 421 – 438 . doi: 10.1080/13588265.2011.606994
   Web of Science ®Google Scholar
• Yin , F. , Mao , H. , Hua , L. , Guo , W. and Shu , M. 2011 . Back propagation neural network modeling for warpage prediction and optimization of plastic products during injection molding . Mater. Design. , 32 : 1844 – 1850 . doi: 10.1016/j.matdes.2010.12.022
   Web of Science ®Google Scholar
• Zhang , B. , Yang , J. and Zhong , Z. 2010 . Optimisation of vehicle side interior panels for occupant safety in side impact . Int. J. Crash , 15 : 617 – 623 . doi: 10.1080/13588265.2010.484193
   Web of Science ®Google Scholar