Application of fibre-reinforced composites beam as energy absorption member in vehicle

References

• Fairfull , A. H. and Hull , D. 1988 . Energy Absorption of Polymer Matrix Composite Structures: Frictional Effects, Structural Failure , Edited by: Wierzbicki , T. and Jones , N. 255 – 279 . New York : John Wiley .
   Google Scholar
• Farley , G. L. 1983 . Energy absorption of composite materials . J. Compos. Mater. , 17 : 267 – 279 . doi: 10.1177/002199838301700307
   Web of Science ®Google Scholar
• Hamada , H. , Coppola , J. C. , Hull , D. , Maekawa , Z. and Sato , H. 1992 . Comparison of energy absorption of carbon/epoxy and carbon/PEEK composite tubes . Composites , 23 : 245 – 252 . 345 doi: 10.1016/0010-4361(92)90184-V
   Google Scholar
• Hamada , H. , Ramakrishna , S. and Sato , H. 1996 . Effect of fiber orientation on the energy absorption capability of carbon fiber/PEEK composite tubes . J. Compos. Mater. , 30 : 947 – 963 . doi: 10.1177/002199839603000806
   Web of Science ®Google Scholar
• Hull , D. 1982 . “ Energy Absorption of Composite Materials under Crash Conditions ” . Vol. 1 , 861 – 870 . Japan Society for Composite Materials . Proceedings of the Fourth International Conference on Composite Materials (ICCM IV)
   Google Scholar
• Hull , D. 1983 . “ Axial crushing of fiber reinforced composite tubes ” . In Structural Crashworthiness Edited by: Jones , N. and Wierzbicki , T. Butterworth , London Chapter 5
   Google Scholar
• Hull , D. 1991 . A unified approach to progressive crushing of fibre-reinforced composite tubes . Compos. Sci. Technol. , 40 : 377 – 421 . doi: 10.1016/0266-3538(91)90031-J
   Web of Science ®Google Scholar
• Hull , D. and Clyne , T. W. 1996 . An Introduction to Composite Materials, , 2nd ed , Cambridge : Cambridge University Press .
   Google Scholar
• Inai , R. 2001 . Advanced fibro science , Kyoto Institute of Technology . , Master thesis,
   Google Scholar
• Mamalis , A. G. , Manolakos , D. E. , Ioannidis , M. B. and Papapostolou , D. P. 2005 . On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: Experimental . Compos. Struct. , 69 : 407 – 420 . doi: 10.1016/j.compstruct.2004.07.021
   Web of Science ®Google Scholar
• Mamalis , A. G. , Manolakos , D. E. , Viegelahn , G. L. , Yap , S. M. and Demosthenous , G. A. 1991 . On the axial crumpling of fibre reinforced composite thin-walled conical shells . Int. J. Vehicle Des. , 12 : 450 – 467 .
   Web of Science ®Google Scholar
• Mamalis , A. G. , Spentzas , K. N. , Manolakos , D. E. , Ioannidis , M. B. and Papapostolou , D. P. 2008 . Experimental investigation of the collapse modes and the main rushing characteristics of composite sandwich panels subjected to flexural loading . Int. J. Crashworthiness , 13 : 349 – 362 . doi: 10.1080/13588260801933691
   Web of Science ®Google Scholar
• Mamalis , A. G. , Spentzas , K. N. , Manolakos , D. E. , Pantelelis , N. and Ioannidis , M. 2008 . Structural and impact behavior of an innovative low-cost sandwich panel . Int. J. Crashworthiness , 13 : 231 – 236 . doi: 10.1080/13588260701788559
   Web of Science ®Google Scholar
• Michael , J. C. and Richard , E. R. 1991 . Comparison of bevel and tulip triggered pultruded tubes for energy absorption . Compos. Sci. Technol. , 40 : 31 – 46 . doi: 10.1016/0266-3538(91)90041-M
   Web of Science ®Google Scholar
• Mkrtchyan , L. , Maier , M. and Huber , U. 2008 . Structural polyurethane foam: Testing and modeling for automotive applications . Int. J. Crashworthiness , 13 : 523 – 532 . doi: 10.1080/13588260802221310
   Web of Science ®Google Scholar
• Saito , H. , Inai , R. and Hamada , H. 2002 . Crushing properties of pultruded glass reinforced square tubes . Int. J. Crashworthiness , 7 : 21 – 33 . 390 doi: 10.1533/cras.2002.0203
   Web of Science ®Google Scholar
• Sigalas , I. , Kumosa , M. and Hull , D. 1991 . Trigger mechanismsin energy-absorbing glass cloth/epoxy tubes . Compos. Sci. Technol. , 40 : 265 – 287 . doi: 10.1016/0266-3538(91)90085-4
   Web of Science ®Google Scholar
• Thornton , P. H. 1979 . Energy absorption in composite structures . J. Compos. Mater , 13 : 247 – 263 . 395 doi: 10.1177/002199837901300308
   Web of Science ®Google Scholar
• Thornton , P. H. 1990 . “ The crush of fiber-reinforced plastics ” . In Handbook of Ceramics and Composites, Vol. 1: Synthesis and Properties , Edited by: Cheremisinoff , N. P. 307 – 337 . New York : Marcel Dekker .
   Google Scholar
• Yang , Y. , Nakai , A. and Hamada , H. 2009 . A method to improve the energy absorption capability of fiber reinforced composite tubes . Int. J. Crashworthiness , 14 : 315 – 322 . doi: 10.1080/13588260802674120
   Web of Science ®Google Scholar
• Yang , Y. , Nakai , A. , Sugihara , S. and Hamada , H. 2009 . Energy absorption capability of multi-axial warp knitted FRP tubes . Int. J. Crashworthiness , 14 : 407 – 418 . doi: 10.1080/13588260802674138
   Web of Science ®Google Scholar
• Yang , Y. , Uozumi , T. , Nakai , A. and Hamada , H. 2006 . A study of applicability of fiber reinforced plastics as energy absorption member . Rev. Automot. Eng. , 27 : 3 410
   Google Scholar
• Zenkert , D. 1995 . An Introduction to Sandwich Construction , London : Chameleon Press .
   Google Scholar