Reference
- K. Bradley, A sizing methodology for the conceptual design of blended-wing-body transport, NASA/CR-2004-213016, 2004. Available at https://archive.org/details/nasa_techdoc_20040110949.
- A.L. Bolsunovsky, N.P. Buzoverya, B.I. Gurevich, V.E. Densisov, A.I. Dunaevsky, L.M. Shkadov, O.V Sonin, A.J. Udzhuhu, and J.P. Zhurihin, Flying wing problems and decisions, Aircraft Des. 4(4) (2001), pp. 193–219.
- S. Cho, C. Bil, and J. Bayandor, Structural design and analysis of a BWB military cargo transport fuselage, 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, 2008.
- Department of Transport UK, White paper, the future of air transport, 2003. Available at https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/272086/6046.pdf.
- V.G. Dmitirev, L.M. Shkadov, V.E. Denisiov, B.I. Gurevich, S.V. Lyapunov, and O.V. Sonin, Flying-wing concept – changes and risks, AIAA/ICAS International Air and Space Symposium and Exposition, Dayton, OH, 2003.
- A.M. Eiband, Human tolerance to rapidly applied accelerations: a summary of the literature, NASA Memorandum MEMO 5-19-59E, 1959. Available at https://archive.org/details/nasa_techdoc_19980228043.
- FAR, 72 FR 54531 – special conditions: Boeing model 787-8 airplane; crashworthiness, Fed. Regist. 72(186) (2007), pp. 54531–54533.
- Federal Aviation Regulations, Part 25 – Airworthiness standards: transport category airplanes, Federal Aviation Administration (FAA), Washington, DC, 2015.
- L. Hansen, W. Heinze, and P. Horst, Blended wing body structures in multidisciplinary pre-design, J. Struct. Multidiscip. Optim. 36 (2008), pp. 93–106.
- R.H. Liebeck, Design of the blended-wing-body subsonic transport, J. Aircraft 41 (2004), pp. 10–25.
- V. Mukhopadhyay, Blended-wing-body (BWB) fuselage structural design for weight reduction, 46th AIAA/ASME/ASCE/AHS/ASC Structures Dynamics and Material Conference, Austin, TX, 2005.
- V. Mukhopadhyay, J. Sobieszczanski-Sobieski, I. Kosaka, G. Quinn, and C. Charpentier, Analysis design and optimization of non-cylindrical fuselage for blended-wing-body (BWB) vehicle, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA, 2002.
- B. Paluch, Flying Wing 3D FEM, NACRE deliverable report, ONERA, Lille, 2007.
- D. Schwinn, Integration of crashworthiness aspects into preliminary aircraft design, Appl. Mech. Mater. 598 (2014), pp. 146–150.
- R.M. Wood and S. Bauer, Flying wings/flying fuselages, 39th AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV, 2001.
- R.M. Wood, The contributions of Vincent Justus Burnelli, 41st AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV, 2003.