Effect of pulse scheme on the microstructural evolution, residual stress state and mechanical performance of resistance spot welded DP1000-GI steel

References

• Baluch N, Udin ZM, Abdullah CS. Advanced high strength steel in auto industry: an overview. Eng Tech Appl Sci Res. 2004;4:686–689.
   Google Scholar
• Tumuluru MD. Resistance spot welding of coated high-strength dual-phase steels. Weld J. 2006;85:31–37.
   Web of Science ®Google Scholar
• Dancette S, Fabrègue D, Massardier V, et al. Experimental and modeling investigation of the failure resistance of advanced high strength steels spot welds. Eng Fract Mech. 2011;78:2259–2272. doi: 10.1016/j.engfracmech.2011.04.013
   Web of Science ®Google Scholar
• Sawanishi C, Ogura T, Taniguchi K, et al. Mechanical properties and microstructures of resistance spot welded DP980 steel joints using pulsed current pattern. Sci Tech Weld Join. 2014;19:52–59. doi: 10.1179/1362171813Y.0000000165
   Web of Science ®Google Scholar
• Chabok A, van der Aa E, De Hosson JTM, et al. Mechanical behavior and failure mechanism of resistance spot welded DP1000 dual phase steel. Mater Des. 2017;124:171–182. doi: 10.1016/j.matdes.2017.03.070
   Web of Science ®Google Scholar
• Moshayedi H, Sattari-Far I. Resistance spot welding and the effects of welding time and current on residual stresses. J Mater Process Technol. 2014;214:2545–2552. doi: 10.1016/j.jmatprotec.2014.05.008
   Web of Science ®Google Scholar
• Florea RS, Hubbard CR, Solanki KN, et al. Quantifying residual stresses in resistance spot welding of 6061-T6 aluminum alloy sheets via neutron diffraction measurements. J Mater Process Technol. 2012;212:2358–2370. doi: 10.1016/j.jmatprotec.2012.06.024
   Web of Science ®Google Scholar
• Nodeh IR, Serajzadeh IR, Kokabi AH. Simulation of welding residual stresses in resistance spot welding, FE modeling and X-ray verification. J Mater Process Technol. 2008;205:60–69. doi: 10.1016/j.jmatprotec.2007.11.104
   Web of Science ®Google Scholar
• Cha BW, Na SJ. A study on the relationship between welding conditions and residual stress of resistance spot welded 304-type stainless steels. J Manufac Sys. 2003;22:181–189. doi: 10.1016/S0278-6125(03)90019-7
   Web of Science ®Google Scholar
• Bae D, Sohn I, Hong J. Assessing the effects of residual stresses on the fatigue strength of spot welds – Residual stress at the nugget's edge was taken into consideration in the evaluation of fatigue strength for spot welds of various shapes and dimensions. Weld J. 2003;82:18s–23s.
   Web of Science ®Google Scholar
• Lawrence FV, Wang PC, Corten HT. An empirical method for estimating the fatigue resistance of tensile-shear spot welds. SAE International Congress and Exposition; 1983.
   Google Scholar
• Anastassiou M, Babbit M, Lebrun JL. Residual stresses and microstructure distribution in spot-welded steel sheets: relation with fatigue behaviour. Mater Sci Eng A. 1990;125:141–156. doi: 10.1016/0921-5093(90)90166-Z
   Web of Science ®Google Scholar
• Sabaté N, Vogel D, Gollhardt A, et al. Measurement of residual stress by slot milling with focused ion-beam equipment. J Micromech Microeng. 2006;16:254–259. doi: 10.1088/0960-1317/16/2/009
   Web of Science ®Google Scholar
• Winiarski B, Langford RM, Tian J, et al. Mapping residual stress distributions at the micron scale in amorphous materials. Metall Mater Trans A. 2010;41:1743–1751. doi: 10.1007/s11661-009-0127-4
   Google Scholar
• STAHL-EISEN-Prüfblätter des Stahlinstituts VDEh. Testing and documentation guideline for the joinability of steel sheet Part 2: resistance spot welding; 2008.
   Google Scholar
• ANSI/AWS/SAE standard D8.9-97. Recommended practices for test methods and evaluation the resistance spot welding behavior of automotive sheet steels; 1997.
   Google Scholar
• Mansilla C, Martínez-Martínez D, Ocelík V, et al. On the determination of local residual stress gradients by the slit milling method. J Mater Sci. 2015;50:3646–3655. doi: 10.1007/s10853-015-8927-y
   Web of Science ®Google Scholar
• Zhong N, Liao X, Wang M, et al. Improvement of microstructures and mechanical properties of resistance spot welded DP600 steel by double pulse technology. Mater Trans. 2011;52:2143–2150. doi: 10.2320/matertrans.M2011135
   Web of Science ®Google Scholar
• Van der Aa EM, Amirthalinham M, Winter J, et al. Improved resistance spot weldability of 3rd generation AHSS for automotive applications. In: Graz, Seggau, Austria, Proceedings 11th International seminar on numerical analysis of weldability; Graz, Austria, 2015.
   Google Scholar
• Eftekharmilani P, van der Aa E, Hermans MJM, et al. Microstructural characterisation of double pulse resistance spot welded advanced high strength steel. Sci Technol Weld Joining. 2017;22:545–554. doi: 10.1080/13621718.2016.1274848
   Web of Science ®Google Scholar
• Radakovic DJ, Tumuluru M. An evaluation of the cross-tension test of resistance spot welds in high-strength dual-phase steels. Weld J. 2012;91:8–15.
   Web of Science ®Google Scholar
• Lloyd JRT. The effect of residual stress and crack closure on fatigue crack growth. Doctor of Philosophy thesis. In Department of materials engineering. University of Wollongong; 1999.
   Google Scholar