References
- Furuya H, Kawabata T, Takahashi Y, et al. Development of low-nickel steel for LNG storage tanks. In: Proceedings of the 2013 International Conference and Exhibition on Liquefied Natural Gas; 16–19 April 2013; Houston (TX); 2013.
- Ishimatu J, Kawabata K, Morita H, et al. Building of advanced large sized membrane type LNG carrier. Tokyo: Mitsubishi Heavy Industries; 2004.
- Hoshio M, Saitoh N, Muraoka H, et al. Development of super-9%Ni steel plates with superior low-temperature toughness for LNG storage tanks. Nippon Steel Tech Rep. 2004;380:17–20.
- Oh DJ, Lee JH, Noh BJ, et al. Investigation of fatigue performance of low temperature alloys for liquefied natural gas storage tanks. J Mech Eng Sci. 2015;229:1300–1314.
- Scheid A, Félix LM, Martinazzi D, et al. The microstructure effect on the fracture toughness of ferritic Ni-alloyed steels. Mater Sci Eng A. 2016;661:96–104.
- KOBELCO, Kobelco’s welding consumables for LNG storage tanks made of 9% Ni steel. 2011;14 (2).
- Mathers G. Welding of ferritic cryogenic steels. The Welding Institute; London; 2012.
- Gustafsson M, Thuvander M, Bergqvist EL, et al. Effect of welding procedure on texture and strength of nickel-based WM. Sci Technol Weld Join. 2007;12:549–555.
- Mizumoto M, Motomatsu R, Nagasaki H, et al. Development of submerged arc welding in vertical up position: a study on welding consumables for 9%Ni steel. J Japan Weld Soc. 2008;82:48–49.
- Yoon YK, Kim JH, Shim KT, et al. Mechanical characteristics of 9% Ni steel welded joint for LNG storage tank at cryogenic. Int J Mod Phys. 2012;6:355–360.
- Mu W, Li Y, Cai Y, et al. Cryogenic fracture toughness of 9%Ni steel flux cored arc welds. J Mater Process Technol. 2018;252:804–812.
- Jang JI, Ju JB, Lee BW, et al. Effects of microstructural change on fracture characteristics in coarse-grained heat-affected zones of QLT-processed 9% Ni steel. Mater Sci Eng A. 2003;340:68–79.
- Park JY, Lee JM, Kim MH. An investigation of the mechanical properties of a weldment of 7% nickel alloy steels. Metals. 2016;285:1–10.
- Bourges P, Malingraux M. Fabrication and welding of thick plates in 9% Ni cryogenic steel. INDUSTEEL Co; Charleroi; 2008.
- El-Batahgy A, Gumenyuk A, Gook S, et al. Comparison between GTA and laser beam welding of 9%Ni steel for critical cryogenic applications. J Mater Process Technol. 2018;261:193–201.
- Wu Y, Cai Y, Sun D, et al. Microstructure and properties of high-power laser welding of SUS304 to SA553 for cryogenic applications. J Mater Process Technol. 2015;225:56–66.
- Huang Z, Cai Y, Mu W, et al. Effects of laser energy allocation on weld formation of 9%Ni steel made by narrow gap laser welding filled with nickel based alloy. J Laser Appl. 2018;30:032013.
- El-Batahgy A, Khourshid A, Sharef T. Effect of laser beam welding parameters on microstructure and properties of duplex stainless steel. Mater Sci Appl. 2011;10:1443–1451.
- Quiroz V, Gumenyuk A, Rethmeier M. Laser beam weldability of high-manganese austenitic and duplex stainless steel sheets. Weld World. 2012;56:9–20.
- El-Batahgy A, DebRoy T. Nd-YAG laser beam and GTA welding of Ti-6Al-4V alloy. Int J Eng Tech Res. 2014;12:43–50.
- Stavridis J, Papacharalampopoulos A, Stavropoulos P. Quality assessment in laser welding: a critical review. Int J Adv Manuf Technol. 2018;94:1825–1847.
- Verma J, Taiwade RV. Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless-steel weldments – a review. J Manuf Processes. 2017;25:134–152.
- Agusa K, Kosho M, Nishiyama N, et al. Production of 9% Ni steel UOE pipe with ferritic filler submerged arc welding. Trans ISIJ. 1986;26:359–366.
- Koshiga F, Tanaka J, Watanabe I, et al. Matching ferritic consumable welding of 9% nickel steel to enhance safety and economy. Weld J. 1984;4:105s–115s.
- Zhao X-Q, Pan T, Wang Q-F, et al. Effect of tempering temperature on microstructure and mechanical properties of steel containing Ni of 9%. J Iron Steel Res Int. 2011;18:47–51.