References
- Yuan Y, Yamazaki K, Suzuki R. Relationship between penetration and porosity in horizontal fillet welding by a new process “hybrid tandem MAG welding process”. Weld World. 2016;60:515–524.
- Fersini V, Matera S. The synchronized tandem wire welding process applied to the welding of structural plates. Weld Int. 2009;23:597–605.
- Liu G, Tang X, Han S, et al. Influence of interwire angle on undercutting formation and arc behavior in pulsed tandem narrow-gap GMAW. Mater Des. 2020;193:108795.
- Wu K, Ding N, Yin T, et al. Effects of single and double pulses on microstructure and mechanical properties of weld joints during high-power double-wire GMAW. J Manuf Process. 2018;35:728–734.
- Schnick M, Wilhelm G, Lohse M, et al. Three-dimensional modelling of arc behaviour and gas shield quality in tandem gas–metal arc welding using anti-phase pulse synchronization. J Phys D: Appl Phys. 2011;44:185205.
- Arita H, Morimoto T, Nagaoka S, et al. Development of advanced 3-electrode MAG high-speed horizontal fillet welding process. Weld World. 2009;53:35–43.
- Yokota Y, Shimizu H, Nagaoka S, et al. Development and application of the 3-electrode MAG high-speed horizontal fillet welding process. Weld World. 2012;56:43–47.
- Lee DY, Leifsson L, Kim J-Y, et al. Optimisation of hybrid tandem metal active gas welding using Gaussian process regression. Sci Technol Weld Joining. 2020;25:208–217.
- Häßler M, Rose S, Füssel U. The influence of arc interactions and a central filler wire on shielding gas flow in tandem GMAW. Weld World. 2016;60:713–718.
- Ueyama T, Ohnawa T, Tanaka M, et al. Effects of torch configuration and welding current on weld bead formation in high speed tandem pulsed gas metal arc welding of steel sheets. Sci Technol Weld Joining. 2005;10:750–759.
- Shahi A, Pandey S. Welding current prediction in GMAW and UGMAW processes using response surface methodology. Sci Technol Weld Joining. 2006;11:341–346.
- da Silva Costa GC, de Resende AA. Evaluation of the TIG–MIG/MAG welding process in direct polarity. SN Appl Sci. 2020;2:1–6.