Prediction and validation of temperature distribution and material flow during refill friction stir spot welding of AZ91D magnesium alloy

References

• Weng F, Liu YF, Chew YX, et al. Double-side friction stir welding of thick magnesium alloy: microstructure and mechanical properties. Sci Technol Weld Join. 2020;25(5): 359–368.
   Web of Science ®Google Scholar
• Li GH, Zhou L, Luo SF, et al. Microstructure and mechanical properties of bobbin tool friction stir welded ZK60 magnesium alloy. Mater Sci Eng A. 2020;776:138953. 
   Web of Science ®Google Scholar
• Singh K, Singh G, Singh H. Review on friction stir welding of magnesium alloys. J. Magnes. Alloy. 2018;6(4): 399–416.
   Web of Science ®Google Scholar
• Liu Z, Liu D, Xu J, et al. Microstructural investigation and mechanical properties of dissimilar friction stir welded magnesium alloys. Sci Technol Weld Join. 2015;20:264–270.
   Web of Science ®Google Scholar
• Deng HB, Chen YH, et al. Microstructure, mechanical properties and transformation behavior of friction stir welded Ni50.7Ti49.3 alloy. Mater Des. 2020;189.
   Web of Science ®Google Scholar
• Zhou L, Li GH, Zhang RX, et al. Microstructure evolution and mechanical properties of friction stir spot welded dissimilar aluminum–copper joint. J Alloys Compd. 2019;775:372–382.
   Web of Science ®Google Scholar
• Chu Q, Yang XW, Li WY, et al. Microstructure and mechanical behaviour of pinless friction stir spot welded AA2198 joints. Sci Technol Weld Join. 2016;21:164–170.
   Web of Science ®Google Scholar
• Amancio-Filho ST, Bueno C, dos Santos JF, et al. On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures. Mater Sci Eng A. 2011;528:3841–3848.
   Web of Science ®Google Scholar
• Li GH, Zhou L, Luo SF, et al. Quality improvement of bobbin tool friction stir welds in Mg–Zn–Zr alloy by adjusting tool geometry. J Mater Process Technol. 2020;282.
   Web of Science ®Google Scholar
• Xu Z, Li Z, Ji S, et al. Refill friction stir spot welding of 5083-O aluminum alloy. Mater Sci Technol. 2018;34:878–885.
   Google Scholar
• Uematsu Y, Tokaji K, Tozaki Y, et al. Effect of re-filling probe hole on tensile failure and fatigue behaviour of friction stir spot welded joints in Al–Mg–Si alloy. Int J Fatigue. 2008;30:1956–1966.
   Web of Science ®Google Scholar
• Solanki KN, Jordon JB, Whittington W, et al. Structure–property relationships and residual stress quantification of a friction stir spot welded magnesium alloy. Scr Mater. 2012;66:797–800.
   Web of Science ®Google Scholar
• Das T, Das R, Paul J. Resistance spot welding of dissimilar AISI-1008 steel/Al-1100 alloy lap joints with a graphene interlayer. J Manuf Process. 2020;53: 260–274.
   Web of Science ®Google Scholar
• Cao JY, Wang M, Kong L, et al. Numerical modeling and experimental investigation of material flow in friction spot welding of Al 6061-T6. Int J Adv Manuf Technol. 2017;89(5–8):129–2139.
   Web of Science ®Google Scholar
• Chu Q, Yang XW, Li WY, et al. Numerical analysis of material flow in the probeless friction stir spot welding based on coupled Eulerian–Lagrangian approach. J Manuf Process. 2018;36.
   Web of Science ®Google Scholar
• Al-Badour F, Merah N, Shuaib A, et al. Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes. J Mater Process Technol. 2013;213:1433–1439.
   Web of Science ®Google Scholar
• Akbari M, Asadi P. Dissimilar friction stir lap welding of aluminum to brass: modeling of material mixing using coupled Eulerian–Lagrangian method with experimental verifications. Int J Mech Mater Des. 2020;234(8): 1117–1128.
   Google Scholar
• Yang XW, Feng WY, Li WY, et al. Numerical modelling and experimental investigation of thermal and material flow in probeless friction stir spot welding process of Al 2198-T8. Sci Technol Weld Join. 2018;23(8):704–714.
   Web of Science ®Google Scholar
• Meyghani B, Awang MB, Wu CS. Thermal analysis of friction stir processing (FSP) using arbitrary Lagrangian–Eulerian (ALE) and smoothed particle hydrodynamics (SPH) meshing techniques. Materialwiss Werkst. 2020;51(5):550–557.
   Web of Science ®Google Scholar
• Zhang B, Chen X, Pan KX, et al. Thermo-mechanical simulation using microstructure-based modeling of friction stir spot welded AA 6061-T6. J Manuf Process. 2019;37:71–81.
   Web of Science ®Google Scholar
• Ji SD, Li ZW, Wang Y, et al. Material flow behavior of refill friction stir spot welded LY12 aluminum alloy. High Temp Mater Process. 2016;36(5):495–504.
   Web of Science ®Google Scholar
• Piotr L, Anna D. Experimental and numerical investigation of aluminum lap joints made by RFSSW. Meccanica. 2016;51(2):455–462.
   Web of Science ®Google Scholar
• Song M, Kovacevic R. Thermal modeling of friction stir welding in a moving coordinate system and its validation. Int J Mach Tools Manuf. 2003;43:605–615.
   Web of Science ®Google Scholar
• Motaman SAH, Schacht K, Haase C, et al. Thermo-micro-mechanical simulation of metal forming processes. Int J Solids Struct. 2019: 178–179: 59–80.
   Web of Science ®Google Scholar
• Badour A, Merah N, Shuaib A, et al. Thermomechanical finite element model of friction stir welding of dissimilar alloys. Int J Adv Manuf Technol. 2014;72:607–617.
   Web of Science ®Google Scholar
• Wen Q, Li WY, Gao YJ, et al. Numerical simulation and experimental investigation of band patterns in bobbin tool friction stir welding of aluminum alloy. Int J Adv Manuf Technol. 2018;100(9–12):2679–2687.
   Web of Science ®Google Scholar
• Khandkar M, Khan JA, Reynolds AP. Prediction of temperature distribution and thermal history during friction stir welding: input torque based model. Sci Technol Weld Join. 2003;8:165–174.
   Web of Science ®Google Scholar
• Gerlich A, Su P, North TH. Peak temperatures and microstructures in aluminum and magnesium alloy friction stir spot welds. Sci Technol Weld Join. 2005;10:6.
   Web of Science ®Google Scholar
• Ji YB. Preparation of AZ91D slurries for semi-solid forming using Al8(Mn, Fe)5 precipitates. Chin Soc Rare Earths. 2004;5: 46–50.
   Google Scholar
• Zhao YQ, Liu HJ, Yang TF, et al. Study of temperature and material flow during friction spot welding of 7B04-T74 aluminum alloy. Int J Adv Manuf Technol. 2016;83(9–12):1467–1475.
   Web of Science ®Google Scholar