References
- Li LY, Jun X, Bin H, et al. Microstructure and mechanical properties of welded joints of L415/316L bimetal composite pipe using post internal-welding process. Int J Press Vessels Pip. 2020;179:1–10.
- Yu WX, Liu BX, Chen CX, et al. Microstructure and mechanical properties of stainless steel clad plate welding joints by different welding processes. Sci Technol Weld Join. 2020;25(7):571–580.
- Li CA, Qin GL, Tang YS, et al. Microstructures and mechanical properties of stainless-steel clad plate joint with diverse filler metals. J Mater Res Technol. 2020;9(2):2522–2534.
- Dhib Z, Guermazi N, Gaspérini M, et al. Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: microstructure and mechanical properties before and after welding. Mater Sci Eng A. 2016;656:130–141.
- Lidbury DPG. The significance of residual stresses in relation to the integrity of LWR pressure vessels. Int J Press Vessels Pip. 1984;17(4):197–328.
- Zhu R, Wang J, Zhang Z, et al. Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water. Corros Sci. 2017;120:219–230.
- Jiang WC, Liu ZB, Gong JM, et al. Numerical simulation to study the effect of repair width on residual stresses of a stainless steel clad plate. Int J Press Vessels Pip. 2010;87:457–463.
- Jiang WC, Wang BY, Gong JM, et al. Finite element analysis of the effect of welding heat input and layer number on residual stress in repair welds for a stainless steel clad plate. Mater Des. 2011;32(5):2851–2857.
- Giri A, Mahapatra MM, Sharma K, et al. A study on the effect of weld groove designs on residual stresses in SS304LN thick multipass pipe welds. Int J Steel Struct. 2017;17(1):65–75.
- E837-08e2A. Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method. ASTM International. 2009.
- Dai PY, Wang YF, Li S, et al. FEM analysis of residual stress induced by repair welding in SUS304 stainless steel pipe butt-welded joint. J Manuf Process. 2020;58:975–983.
- Zhang C, Li S, Hu L, et al. Effects of pass arrangement on angular distortion, residual stresses and lamellar tearing tendency in thick-plate T-joints of low alloy steel. J Mater Process Technol. 2019;274:1–10.
- Goldak J, Chakravarti A, Bibby M. A new finite element model for welding heat sources. Metall Trans B. 1984;15(2):299–305.
- Ye YH, Cai JP, Jiang XH, et al. Influence of groove type on welding-induced residual stress, deformation and width of sensitization region in a SUS304 steel butt welded joint. Adv Eng Softw. 2015;86:39–48.
- Lee CH, Chang KH, Lee CY. Comparative study of welding residual stresses in carbon and stainless steel butt welds. Proc Inst Mech Eng, Part B. 2008;222(12):1685–1694.
- Lee CH, Chang KH. Temperature fields and residual stress distributions in dissimilar steel butt welds between carbon and stainless steels. Appl Therm Eng. 2012;45:33–41.